Difference between revisions of "Black Knight"

(removed non-notable pilot; see BattleTechWiki:Project BattleMechs; unbolded variant names)
Line 30: Line 30:
  
 
==Variants==
 
==Variants==
* '''BL-6b-KNT''' - Used by the [[SLDF Royal units|SLDF Royal]] BattleMech regiments, the 6b upgraded the dissipation system with [[double heat sink]]s and used the tonnage saved to upgrade the Large Lasers to [[Large Pulse Laser]]s. In addition, the PPC is upgraded to an [[ER PPC]]. BV (2.0) = 1,627
+
* BL-6b-KNT - Used by the [[SLDF Royal units|SLDF Royal]] BattleMech regiments, the 6b upgraded the dissipation system with [[double heat sink]]s and used the tonnage saved to upgrade the Large Lasers to [[Large Pulse Laser]]s. In addition, the PPC is upgraded to an [[ER PPC]]. BV (2.0) = 1,627
  
* '''BL-7-KNT''' - The BL7 ''Black Knight'' is the downgraded version of the [['Mech]]. The [[Endo Steel]] chassis was replaced while the weapons payload and speed have remained the same. The weight lost to the standard chassis is made up for by lowering the ''Black Knight''s overall armor protection by two tons. BV (1.0) = 1,106<ref name=CO123>''Combat Operations'', p.123</ref>, BV (2.0) = 1,443<ref>''Record Sheets: 3039'', p. 157</ref>
+
* BL-7-KNT - The BL7 ''Black Knight'' is the downgraded version of the [['Mech]]. The [[Endo Steel]] chassis was replaced while the weapons payload and speed have remained the same. The weight lost to the standard chassis is made up for by lowering the ''Black Knight''s overall armor protection by two tons. BV (1.0) = 1,106<ref name=CO123>''Combat Operations'', p.123</ref>, BV (2.0) = 1,443<ref>''Record Sheets: 3039'', p. 157</ref>
  
* '''BL-7-KNT-L''' - This is a field modification from the [[Free Worlds League]]. Because of the scarcity of PPCs there a damaged [[PPC]] is replaced by a [[Large Laser]] and 2 additional [[Heat Sinks]]. BV (2.0) = 1,409<ref>''Record Sheets: 3039'', p. 158</ref>
+
* BL-7-KNT-L - This is a field modification from the [[Free Worlds League]]. Because of the scarcity of PPCs there a damaged [[PPC]] is replaced by a [[Large Laser]] and 2 additional [[Heat Sinks]]. BV (2.0) = 1,409<ref>''Record Sheets: 3039'', p. 158</ref>
  
* '''BL-9-KNT''' - One of the so-called "[[Clanbuster]]" refits developed by [[ComStar]] in the lead-up to the [[Battle of Tukayyid]], this variant has been equipped with an Extralight engine, allowing it to mount an upgraded and heavier weapons load. The [[PPC]] has been upgraded to an Magna Sunspot [[ER PPC]] and the medium lasers have been switched to Aberdovey [[Medium Pulse Laser]]s, with a Aberdovey [[Large Pulse Laser]] added to the design as well, while the Small Laser and Beagle probe have been removed. To handle the heavier heat load, the [[heat sink]]s have been upgraded to double strength versions. In addition, for close in work, the ''Black Knight'' has had a long-sword shaped [[Hatchet]] added, allowing it to make devastating physical attacks. <ref> ''Tukayyid'', pp. 12-13</ref>  BV (1.0) = 1,222<ref name=CO123/>, BV (2.0) = 1,678
+
* BL-9-KNT - One of the so-called "[[Clanbuster]]" refits developed by [[ComStar]] in the lead-up to the [[Battle of Tukayyid]], this variant has been equipped with an Extralight engine, allowing it to mount an upgraded and heavier weapons load. The [[PPC]] has been upgraded to an Magna Sunspot [[ER PPC]] and the medium lasers have been switched to Aberdovey [[Medium Pulse Laser]]s, with a Aberdovey [[Large Pulse Laser]] added to the design as well, while the Small Laser and Beagle probe have been removed. To handle the heavier heat load, the [[heat sink]]s have been upgraded to double strength versions. In addition, for close in work, the ''Black Knight'' has had a long-sword shaped [[Hatchet]] added, allowing it to make devastating physical attacks. <ref> ''Tukayyid'', pp. 12-13</ref>  BV (1.0) = 1,222<ref name=CO123/>, BV (2.0) = 1,678
  
* '''BL-12-KNT''' - The BL12 is probably the most technologically advanced version of the ''Black Knight'' to date. The [['Mech]] is also based on the BL6 model but takes the design in a different direction than the BL9. The first thing that was done to the design was the upgrade of all of the Medium Lasers and the [[PPC]] to extended range versions. Next, the 'Mech has had its [[heat sink]]s upgraded to [[double heat sink]]s. Because of this, the number of heat sinks has been reduced to sixteen from twenty. Finally, all of the weapons were mated to a [[Targeting Computer]]. BV (1.0) = 1,450, BV (2.0) = 1,840
+
* BL-12-KNT - The BL12 is probably the most technologically advanced version of the ''Black Knight'' to date. The [['Mech]] is also based on the BL6 model but takes the design in a different direction than the BL9. The first thing that was done to the design was the upgrade of all of the Medium Lasers and the [[PPC]] to extended range versions. Next, the 'Mech has had its [[heat sink]]s upgraded to [[double heat sink]]s. Because of this, the number of heat sinks has been reduced to sixteen from twenty. Finally, all of the weapons were mated to a [[Targeting Computer]]. BV (1.0) = 1,450, BV (2.0) = 1,840
 
 
==Notable Pilots==
 
Famous individuals in the BattleTech universe who piloted ''Black Knights'' include:
 
*Leftenant [[David McKinnon]] piloted a ''Black Knight'' BL-12-KNT in 3070, against the [[Word of Blake]], and later as a member of [[Stone's Lament]].
 
  
 
==References==
 
==References==
Line 66: Line 62:
 
*''[[Technical Readout: 3050 Upgrade]]''
 
*''[[Technical Readout: 3050 Upgrade]]''
 
*''[[Tukayyid (scenario pack)|Tukayyid]]''
 
*''[[Tukayyid (scenario pack)|Tukayyid]]''
*''[[Technical Readout: 3075]]''
+
 
  
 
[[Category:BattleMechs]]
 
[[Category:BattleMechs]]

Revision as of 22:58, 12 June 2010

Black Knight
Black Knight
Production information
Manufacturer Kong Interstellar Corporation
Model BL-6-KNT
Class Heavy
Cost 7,136,938 C-bills
Technical specifications
Mass 75 tons
Chassis Technicron 1L Endo Steel
Armor Numall DuraBond
Engine Vlar 300
Speed 64.8 km/h
Armament
BV (1.0) 1,191[1]
BV (2.0) 1,550[2]
This article is about the Black Knight BattleMech. For the computer game, see MechWarrior IV#MechWarrior IV: Black Knight Expansion Pack and MechWarrior IV: Black Knight.


Description

The Black Knight is a BattleMech that appears to be a jack-of-all-trades. The all energy weapon configuration allows it to operate for long periods without re-supply. The good armor protection allows the 'Mech to stand up to a great deal of punishment and its Beagle Active Probe allow it to work well as a command 'Mech and also as a heavy scout. The main drawback of the design is its use of single heat sinks. With twenty heat sinks it is able to dissipate a great deal of the heat its weapons produce. If the Black Knight finds itself in a protracted combat situation, though, a less experienced MechWarrior can have trouble with heat management.


Armament

As mentioned before, the Black Knight is an all energy weapon 'Mech. The primary weapon is the Magna Hellstar II PPC. Backing up the PPC are two McCorkel Large Lasers that can inflict a great deal of damage as the Black Knight closes with its enemy. Finally, for closer ranges, the Black Knight employs four Maxell DT Medium Lasers and a single Magna Small Laser.


Variants

  • BL-6b-KNT - Used by the SLDF Royal BattleMech regiments, the 6b upgraded the dissipation system with double heat sinks and used the tonnage saved to upgrade the Large Lasers to Large Pulse Lasers. In addition, the PPC is upgraded to an ER PPC. BV (2.0) = 1,627
  • BL-7-KNT - The BL7 Black Knight is the downgraded version of the 'Mech. The Endo Steel chassis was replaced while the weapons payload and speed have remained the same. The weight lost to the standard chassis is made up for by lowering the Black Knights overall armor protection by two tons. BV (1.0) = 1,106[3], BV (2.0) = 1,443[4]
  • BL-9-KNT - One of the so-called "Clanbuster" refits developed by ComStar in the lead-up to the Battle of Tukayyid, this variant has been equipped with an Extralight engine, allowing it to mount an upgraded and heavier weapons load. The PPC has been upgraded to an Magna Sunspot ER PPC and the medium lasers have been switched to Aberdovey Medium Pulse Lasers, with a Aberdovey Large Pulse Laser added to the design as well, while the Small Laser and Beagle probe have been removed. To handle the heavier heat load, the heat sinks have been upgraded to double strength versions. In addition, for close in work, the Black Knight has had a long-sword shaped Hatchet added, allowing it to make devastating physical attacks. [6] BV (1.0) = 1,222[3], BV (2.0) = 1,678
  • BL-12-KNT - The BL12 is probably the most technologically advanced version of the Black Knight to date. The 'Mech is also based on the BL6 model but takes the design in a different direction than the BL9. The first thing that was done to the design was the upgrade of all of the Medium Lasers and the PPC to extended range versions. Next, the 'Mech has had its heat sinks upgraded to double heat sinks. Because of this, the number of heat sinks has been reduced to sixteen from twenty. Finally, all of the weapons were mated to a Targeting Computer. BV (1.0) = 1,450, BV (2.0) = 1,840

References

  1. Combat Operations, p. 106
  2. Technical Readout: 3050 Upgrade, p. 213
  3. 3.0 3.1 Combat Operations, p.123
  4. Record Sheets: 3039, p. 157
  5. Record Sheets: 3039, p. 158
  6. Tukayyid, pp. 12-13


Bibliography