Difference between revisions of "Shugosha"

m (→‎Bibliography: adding missing category)
(→‎Notes: Note regarding Patron)
Line 50: Line 50:
  
 
As of this time, the MUL Profiles for the Shugosha are not update, which does not include introduction dates for the original Shugosha LoaderMech or its later Drone variants.
 
As of this time, the MUL Profiles for the Shugosha are not update, which does not include introduction dates for the original Shugosha LoaderMech or its later Drone variants.
 +
 +
The image of the Shogosha originates from Patron due to it's design legacy and as a cost saving method of reusing images for minor variants.
  
 
==References==
 
==References==

Revision as of 11:11, 27 January 2015

Shugosha
Shugosha
Production information
Manufacturer
Use LoaderMech
Class
Technical specifications
'Mech type Inner Sphere
Mass
Chassis
Armor
Engine
Speed km/h
Armament

2x Lifthoist
Mounted Searchlight

BV (2.0) 102[1][2]


Description

The Shugosha, this is a light-class IndustrialMech, which was originally produced by Luthien Armor Works in the Draconis Combine. Based on the Ultra-Light Patron LoaderMech, the Shugosha is distinct from the older design being 5 tons heavier and powered by a Fusion Engine.

However, it would not be until the invasion of Luthien in 3052 where the design would stand out. Invasion of Clans Smoke Jaguars and Nova Cats would force Luthien's defenders to scramble to be come up with unique use for the Shugosha. LAW engineers would take the old Star League Era design, refit for unique role as a MilitiaMech as part of the desperate defense of the planet. These industrial machines were converted into drones refitted with BattleMech weaponry. For the battle itself, they were made to look like typical BattleMechs being fielded during this era such as Archer and the Thunderbolt. Though not combat effective as regular BattleMechs, they presence help the Kurita defenders appear in greater numbers.

The success of these MilitiaMechs, encourage the DCMS to rewarded LAW a contract to produce limited production run of three of these DroneMechs, but without the cosmetic changes at LAW's factory on Nykvarn. After the Jihad, the newly formed Republic of the Sphere bough a few as part their evaluation of Drone Technology.[3]

Weapons and Equipment

Not built for speed, the Fusion engine of the Shugosha allows it to work for long period of times. As with all Fusion powered units, the Shugosha's engine comes with 10 heat sinks to allow the endure heat produced by the mech. Typical for as Industrial machine, it's features Industrial Cockpit with life support and BAR 5 rated Commercial Armor. The machine's armor production gives the design some resistance to damage while undertaking tasks, but if combat should accrue modern weaponry would easily penetrate through it's hull.

For it's primary task as a LoaderMech, the Shugosha has two Lifthoists, one mounted in each of it's side torsos. While a Mounted Searchlight in the center torso aid the pilot operating the 'Mech at night.[4]

Cargo

The Shugosha features two 1.5 ton Cargo bays in each of it's side torsos.

Variants

  • LAW-QM1 Q-MECH
    This is first of the three experimental Drone variants of the Shugosha. Fitted as a Q-Mech, a machine pretending to be harmless industralMech. Changes to the design includes the adding a Drone (Remote) Operating System in the head, Booby Trap in center torso, and Large Laser mounted in the right torso. BV(2.0)=161[5][6]
  • LAW-QM2 Q-MECH
    Similar to QM1, this version of Q-Mech drops the Large Laser, for a 5-Tubed Long-Range Missile launcher and single ton ammunition mounted in left torso. For short-range combat, pair of Medium Lasers are fitted in right arm. BV(2.0)=157[7][8]
  • LAW-QM3 Q-MECH
    Based on the QM1, this version mounts a powerful PPC in it's left torso. BV(2.0)=102[9][10]

Related Designs

Notes

The Shogosha first appeared in third book of the Blood of Kerensky novels, Lost Destiny written by author Michael Stackpole.

As of this time, the MUL Profiles for the Shugosha are not update, which does not include introduction dates for the original Shugosha LoaderMech or its later Drone variants.

The image of the Shogosha originates from Patron due to it's design legacy and as a cost saving method of reusing images for minor variants.

References

  1. Record Sheets: Vehicle Annex, IndustrialMechs & Exoskeletons, p. 49 Shugosha PTN-LAW - Loader Mech's is BV2 included in Record Sheet.
  2. MUL Profile for the Shugosha standard LoaderMech version - BV2.
  3. Technical Readout: Vehicle Annex Revised, p.228 LAW-QM-series Shugosha Q-Mech - "Basic background info on Shugosha".
  4. Record Sheets: Vehicle Annex, IndustrialMechs & Exoskeletons, p. 49 Shugosha PTN-LAW - Loader Mech's stats publish in Record Sheet.
  5. Record Sheets: Vehicle Annex, IndustrialMechs & Exoskeletons, p. 46 Shugosha LAW-QM1 - Drone Q-Mech's stats and BV2 from the Record Sheet.
  6. MUL Profile for the Shugosha LAW-QM1 QMech - Tech level and BV2.
  7. Record Sheets: Vehicle Annex, IndustrialMechs & Exoskeletons, p. 47 Shugosha LAW-QM2 - Drone Q-Mech's stats and BV2 from the Record Sheet.
  8. MUL Profile for the Shugosha LAW-QM2 QMech - Tech level and BV2.
  9. Record Sheets: Vehicle Annex, IndustrialMechs & Exoskeletons, p. 48 Shugosha LAW-QM3 - PPC armed Drone Q-Mech's stats and BV2 from the Record Sheet.
  10. MUL Profile for the Shugosha LAW-QM3 QMech - Tech level and BV2.

Bibliography