Spindrift
Sarna News
- HEXTECH Review - Wave 3 Brings More Urban Options To Your Battlefield
- Your BattleTech News Round-Up For March, 2024
- Crashing 'Mechs With Jennifer Brozek, Author Of The Rogue Academy Trilogy
- Getting The Word Out With Rem Alternis, Catalyst Community & Marketing Director
- Bad 'Mechs - Yeoman
- Read more →
| Spindrift | |
| SDT-1 Spindrift Aquatic SecurityMech | |
|---|---|
| Production information | |
| Manufacturer | Bowie Industries[1] |
| Use | Security Mech Underwater Patrol |
| Production Year | 3069[2] |
| Model | SDT-1[1] |
| Equipment Rating | N/A[1] |
| Class | Light |
| Introduced | 3069[1] |
| Cost | N/A[2] |
| Technical specifications | |
| 'Mech type | Inner Sphere IndustrialMech |
| Mass | 30 tons |
| Chassis | N/A[1] |
| Armor | Patchwork Armor[1] |
| Engine | Fusion[1] |
| Heat Sinks | 10[1] |
| Speed | 43.2[1] km/h |
| Armament | |
| BV (2.0) | 425[1] 441[2] |
Contents
Description
The Spindrift was an Experimental undersea SecurityMech which was produced by Bowie Industries’ prototype fabrication line on Carlisle in beginning of the Jihad. The initial design uses the chassis of a heavily modified Iroquois Harvester AgroMech as a base.[1] The idea for the design began from the company taking suggestions from its employees.[3]
By 3077, Bowie had deployed two lances of the Spindrift for evaluation. The 'Mech was designed to combat opponents underwater. On land, it is nearly defenseless.[1] Changes would be made due to the results of the tests conducted with these prototypes and dropping experimental armor and the exceedingly difficult to obtain Harjel. The Spindrift production model design would enter production in the Lyran Commonwealth in 3083 as an aquatic type SecruityMech.[3]
Weapons and Equipment
The Spindrift is armed with a right torso-mounted Six-tube Short Range Torpedo launcher with one ton of ammunition. In the left torso, the 'Mech has an Extended Range Small Laser. These weapons are tied into an Advanced Fire Control system to allow military-grade precision in targeting opponents.[1]
Bowie employed a patchwork of different types of armor for protection and evaluation. While normal Heavy Commercial Armor is employed on the rest of the 'Mech, the side torsos had been fitted with a half-ton of Laser Reflective Armor. A half ton of Reactive Armor had been fitted on each arm to test its use underwater. The pilot and the 'Mech's core systems are fitted with Environmental Sealing and BattleMech HarJel in its center torso.[1]
A 120-rated fusion engine powers the 'Mech and allows for its experimental UMU propulsion units to drive the 'Mech to speeds of up to 43.2 km/h underwater.[1]
Variants
- SDT-1A
- The production Spindrift developed in 3083[4] replaces the patchwork armor configuration with five and a half tons of Heavy Industrial Armor. The armament remains the same, as does the underwater maneuvering capability offered by the four UMUs. Procurement problems mean that the BattleMech HarJel system of the prototype has been removed as well. BV (2.0) = 449[5][4]
Design Quirks
The SDT-1A Spindrift variant is subject to the following Design Quirks:[5]
References
- ↑ 1.00 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 Experimental Technical Readout: Boondocks, p. 5, 18, "SDT-1 Spindrift & Record Sheet"
- ↑ 2.0 2.1 2.2 MUL online entry for the Spindrift
- ↑ 3.0 3.1 Technical Readout: Protyped, pp. 98, "SDT-1A Spindrift Aqutic SecurityMech"
- ↑ 4.0 4.1 MUL online entry for the Spindrift SDT-1A variant
- ↑ 5.0 5.1 Technical Readout: Prototypes, p. 99, "SDT-1A Spindrift"