Spartan
09/30/05 06:51 PM
66.141.167.205
|
I was considering using this to tape off portions I wanted to detail but didn't want the paint spilling over to other parts.
I figured I would just cut of little pieces maybe an 1/8 inch wide or so to stick on and then peel off when I finished. But I'm not sure how it would do on a painted mini.
Any thoughts?
Spartan
We demand rigidly defined areas of doubt and uncertainty.
(I refer you to what Nightward said)
Edited by Spartan (09/30/05 09:36 PM)
|
Spartan
10/03/05 10:40 AM
64.217.216.174
|
Whoops!
I found out something the other day. There is a (sometimes)blue masking tape that modelers use that's made of plastic that's ideal for minis.
What I was actually refering to was the paperbacked blue masking tape like what someone painting a house would have used and that you can get cheap at Home Depot, etc. But after looking more closely this would not do as well as the tape I mentioned above.
So I'm gonna go with the modelers masking tape.
Spartan
We demand rigidly defined areas of doubt and uncertainty.
(I refer you to what Nightward said)
|
Karagin
10/13/05 11:02 AM
24.243.178.223
|
What is the brand name of this modelrs masking tape?
Karagin
Given time and plenty of paper, a philosopher can prove anything.
|
Spartan
10/14/05 12:50 AM
65.69.152.71
|
Pactra.
Spartan
We demand rigidly defined areas of doubt and uncertainty.
(I refer you to what Nightward said)
|
Karagin
10/14/05 07:08 PM
24.243.178.223
|
THanks.
Karagin
Given time and plenty of paper, a philosopher can prove anything.
|