Tag Archives: IronWind Metals

Pack Hunter vs. Solitaire – Strength in Numbers, Army of One

2016/09/11

In my previous “vs.” article, I compared two second line BattleMechs, the Rabid Coyote and the Ursus. You can find that article here if you would like to read my analysis on the match-up.

In this installment, we again take a look at a pair of second line Clan BattleMechs, but these two are very different from our previous subjects.

When thinking about Light `Mechs, two images usually come to mind, at least for me. The first is of the stealth loner type scout, bravely attempting to get as close to the enemy as possible, even going behind enemy lines, in order to secure precious intel about troop movements, supply lines, and personnel locations. This lone ranger scout seeks out the weaknesses of the enemy and exploits them with brutal efficiency.

The other type of scout that comes to mind is the kind that searches and destroys vulnerable enemy targets in a small group. These scouts rely on gang-up tactics and misdirection to get the job done, working in highly coordinated teams to secure strategic kills, usually performing specific hit & run style strikes meant to pinpoint a specific target.

When juxtaposing these two types of BattleMech scouts, it is not hard to literally find the names of two `Mechs that not only resemble the concepts, they are named for them. The two BattleMechs we will look at in the context of these roles are the Pack Hunter and the Solitaire.

Perhaps not as well known or loved as other Clan favorites like the Dasher (Fire Moth) or Koshi (Mist Lynx), these second line designs come from an era when the Clans were still learning how to co-exist their Inner Sphere neighbors, adapting their toumans to be able to handle the myriad tactics that the Inner Sphere employs to get the job done no matter what.

But before we compare and contrast these Light hunting machines, let’s get to know each machine a little better.

Pack Hunter

Just out for a morning patrol and…holy crap, what’s that thing?!

The Pack Hunter would likely be considered an impressive effort regardless of the circumstances of its design and production. The first collaboration between Clan Wolf-in-Exile and their Arc Royal hosts, the Kell Hounds, the Pack Hunter was meant to be a test best for production capabilities, enabling the Wolves-in-Exile to work out any major problems with Clan technology before moving on to an OmniMech design. The project was a success, with the first production units rolling off the lines in 3059.

Matching superior speed and mobility with a single, hard-hitting weapon system, the Pack Hunter exists on a simple design philosophy. That being that light, fast, hard to hit BattleMechs can succeed in engagements with both Inner Sphere and Clan forces.

The design faced very few notable production problems and hit the field very quickly after its development period. During testing, it was found that as little as two Pack Hunters could demonstrate a clear danger to even a massive Dire Wolf, and the BattleMech is usually found deployed in teams of two or more.

Even under the Clans’ ritual rules of zellbrigen, the Pack Hunter is able to team up with its mate to take on a heavier opponent without the dishonor of breaking the traditional one-on-one combat doctrine. Working “around the rules” in this fashion had led to many Clan opponents wishing they had not agreed to the terms of the engagement.

A simple, efficient, and long-lasting design, the Pack Hunter has seen at least three variants put into production as well as receiving a second incarnation, the Pack Hunter II, during the Jihad and into the Republic era.

Armaments and Capabilities

The Pack Hunter exemplifies simplicity in its design and equipment, all packed into a tidy 30 ton chassis. Armed with only a single Clan Extended-Range Particle Projection Cannon, mounted in its right torso, the `Mech is built on an Endo Steel chassis and protected by four tons of standard armor. Its standard engine allows the Pack Hunter to move at a stop speed of 119 kph and adds to the BattleMech’s durability and affordability. Rounding out its equipment are enough jump jets to jump 210 meters.

Even without a complication array of weapons and equipment, the Pack Hunter‘s extreme efficiency has been proven on the battlefield since day one. Its frequent deployment in pairs is one of the most interesting developments with this BattleMech, as it heralded a slight shift in the Clans’ usually strict adherence to single combat.

Solitaire

Hey, is that a new Pack Hunter? Thor and Odin! No blast that large comes from a Pack Hunter!

That this BattleMech exists might be a bit of a small marvel in itself. The characteristically austere Clan Diamond Shark is not known for creating a BattleMech that literally takes every opportunity possible to make itself more expensive to produce. Yet, the Solitaire still rolled off the production lines and to roaring success to boot.

This blazing fast light BattleMech has few equals in terms of mobility, despite its lack of jump jets. Light Mech pilots in both Clan Diamond Shark and Clan Ghost Bear scrambled and competed to get a hold of any <em>Solitaire</em> that became available as soon as theMech was released.

Tactically, the Solitaire is deployed as a solo killer, stalking ahead of its unit to pick off any opponent that has strayed just a bit out of formation. With the firepower to threaten even most assault BattleMechs, especially when attacking from behind the larger machines, the Solitaire is highly effective when used as a backstabber and an assassin.

When the Solitaire entered production in 3064, the vast majority of units went to Clan Diamond Shark’s Spina Galaxies. Shortly after that, large numbers of Solitaires began to appear in second line units in the Ghost Bear Dominion. Apparently part of a large trade deal, linked either to the Diamond Shark’s help of the Ghost Bear’s earlier relocation to the Inner Sphere or for some unknown future consideration. Clans Cloud Cobra and Ice Hellion also showed interest in the BattleMech, but after the Wars of Reaving it is doubtful that the design would be found in the Clan Homeworlds in any significant numbers.

Armaments and Capabilities

Coming in at 25 tons, the spry Solitaire would not have been near as impressive of a machine if Clan Diamond Shark had cut any expense in its production. Based on an Endo Steel chassis and protected by four and a half tons of Ferro-Fibrous armor, the Solitaire is just about as sturdy and as protected as a Mech of its size can be. The real defensive piece is its Model SF-25 XL engine that allows a top speed of 162 kph. However, it is the chosen armaments for this BattleMech that make it stand out. Boasting one Heavy Large Laser, two Heavy Medium Lasers, and one Heavy Small Laser, the <em>Solitaire</em> is nearly unmatched in its weight class in terms of pure damage potential. The limiting factor for thisMech lies in its ten double heat sinks, making an Alpha Strike attack quite a toasty proposition.

Able to hit hard and fade away quickly enough to cool down, the Solitaire is one dangerous machine in the right hands. To date, the Solitaire has only one variant, which drops one of the Heavy Medium Lasers to add a MASC system. If the Solitaire is not fast enough for you, the Solitaire 2 might be the `Mech for you.

Head to Head

As with the previous contest, these two BattleMechs represent different takes on fulfilling the same battlefield role. The idea of these two `Mechs meeting on the field is one that makes me scratch my head a little.

Strictly speaking, I would imagine that Pack Hunter and Solitaire pilots would do their best to avoid one another on the battlefield. Each chassis is better designed to hunt down heavier BattleMechs than to hunt one another.

Click the picture to visit Iron Wind Metals’ Pack Hunter page.

But for argument sake, let’s take a stab at figuring out some possibilities should the two meet on the field and have no choice but to engage one another. For the purposes of this comparison, we will explore a 1v1 scenario and dismiss that Pack Hunters usually show up in pairs (though I will devote a few sentences to that scenario a little later).

Terrain may or may not be a factor in this match up. While the Pack Hunter‘s jump jets give it a slight edge in being able to ignore certain terrain types, the sheer speed of the Solitaire helps the lighter `Mech keep its own advantage, as long as the terrain is not wide open.

So the first part of the engagement will be advantage Pack Hunter simply because it will be able to open fire probably one turn earlier than the Solitaire, thanks to its ERPPC. Any ERPPC hit to the Solitaire‘s arms will rip it off clean and even lend some splash damage to the corresponding torso. A leg hit will not take out the Solitaire by itself, but it could help to cripple the lighter `Mech if a critical hit is scored.

Assuming the Solitaire can survive long enough to get into long range with its Heavy Large Laser, the battle gets a bit more interesting. Any hit from the Solitaire‘s main weapon will outright destroy any of the Pack Hunter‘s locations, save the Center Torso. Also, because the Pack Hunter only has a single weapon, if that happens to be to the Right Torso (or even the Right Arm in some cases), then the Pack Hunter might as well call it a day.

Click the picture to visit Iron Wind Metals’ Solitaire page.

From there it gets to be a worse proposition for the Pack Hunter, as the Solitaire can use its superior speed to further close the distance to bring its Heavy Medium Lasers to bear. At that point, the multiple hit capability of the Solitaire begins to exact a heavy toll on the Pack Hunter‘s chanced for survival.

One thing to point out here is that the Pack Hunter will benefit from better To-Hit numbers in almost every case, down to a range of 3 hexes. This is a good advantage and should not be overlooked. While it should also not be counted upon to make a huge difference, the advantage exists nonetheless.

So in most 1v1 situations, barring a lucky hit, I think I’m going to have to give the contest to the Solitaire. The speed advantage of the lighter `Mech does a lot to mitigate the range disparity between the two, and the Solitaire also boasts slightly more armor protection, which can make the difference when taking leg hits, thus keeping mobile and in the fight. While the Pack Hunter is more durable thanks to its standard Engine, losing its one weapon system is in most cases just as devastating as being destroyed.

Side Note: I promised I would address this, so here it is. I’ll have to give the engagement to the Pack Hunter if there are two of them. It’s simple a reorganization of the tactical situation. In a 1v1, the Pack Hunter is playing the Solitaire‘s game. Conversely, the 1v2 situation is more than just being simply outnumbered. It is a changing of the scope of the battlefield in a way that brings the Solitaire in the Pack Hunters‘ arena. A clever Solitaire pilot might still come out on top of a 1v2 scenario, but the value of two `Mechs working together is most often greater than the simple sum of the whole.

Final Thoughts

Both of these BattleMechs are amazing at what they do. They’re not completely dissimilar, but they’re also not really the same. Side by side, I would personally take the Solitaire, but I will caveat myself by reminding you that I’m a Ghost Bear player primarily. I have nothing against the Pack Hunter, however, and would not feel cheated or under strength if I had one or two in a Star. Raw BV aside, either situation can easily win back double or more its points.

As far as deployability, the Pack Hunter and its variants, including the Pack Hunter II, has found its way not only into the forces of Clan Wolf-in-Exile and the Kell Hounds, but also into pretty much every other Clan, Mercenary forces, the Republic, and several Houses. Widespread and valued for its capabilities, the Pack Hunter will continue to be a familiar sight on the battlefield for a long time to come.

Conversely, the Solitaire has experienced a rather limited breadth of varied deployment, seen only in the toumans of Clans Ghost Bear and Diamond Shark/Sea Fox even into the 3140s. I do not believe that this means that other military organizations have found fault in the design. Instead, I believe it is reflective of Clan Sea Fox’s continued efforts to keep the design as exclusive as possible, sharing the expensive BattleMech only with its Ghost Bear allies.

Want to Know More?

If you want to know more about either the Pack Hunter or the Solitaire, check out the reference materials listed below:

BattleTech Technical Readout: 3060 on BattleCorps, DriveThruRPG, or Amazon
BattleTech Technical Readout: 3067 on BattleCorps, DriveThruRPG, or Amazon
Pack Hunter on the Master Unit List
Solitaire on the Master Unit List

Want to see me continue to compare BattleMechs? Suggest a new pairing in the comments, and if strikes my fancy I just might write it!

2 Replies

Rabid Coyote vs. Ursus – The Second Line Bodyguards

2016/01/20

While not as adaptable or flexible as OmniMechs, the Clans as a whole still see the indelible value of standard BattleMech technology. Even in their limited configuration state, when equipped with their venerable technology, Clan second line BattleMechs provide some of the most solid, dependable, and fun designs in the game. From the well-known Mad Cat Mk II to the iconic Kodiak and the re-imagined IIC lines, Clan second line designs range all the way from amazing to completely laughable.

Second line `Mechs are generally used for defensive operations, with some exceptions, and as such generally use less expensive and more stable parts and technology. Standard Engines are commonly found in second line designs, as well as standard chassis as opposed to Endo Steel construction. Ferro-Fibrous Armor, however, still appears to be the normal standard even with second line designs.

Today I want to take a look at two second line BattleMechs that were designed a few years, and couple thousand light years, apart from each other. These two `Mechs were designed to fill similar roles in their respective Clans’ toumans, and each Clan went about the job a different way. In the case of Clan Coyote, they needed a lighter and faster design that could deliver a good punch standing alongside heavier units while still possessing enough speed to pursue attackers. For Clan Ghost Bear, the need for a strong and dependable second line design was apparent from the moment they arrived in the Inner Sphere and began taking and holding worlds.

Even with some of the differences in need, Clans Coyote and Ghost Bear ended up designing and producing similar BattleMechs that fit the needs of each Clan near perfectly. Let’s dig into the histories, similarities, differences, and ultimately a comparative match-up, of the Rabid Coyote and the Ursus. For the purposes of this article, we are going to look at just the standard variants of both BattleMechs.

Rabid Coyote

Clan Coyote created the Rabid Coyote out of a need to support their highly successful assault class designs, such as the Canis and Savage Coyote. The larger `Mechs lacked a speed that was necessary for pursuing fleeing foes and suffered from the ability to engage faster enemies that could redeploy and attack from new angles.

During the time period following the Great Refusal, in the upheaval and scramble for new resources that followed the vacuum of Clan Smoke Jaguar’s demise, Clan Coyote did not fare well. Clan Coyote, once at the top of Clan heap, now found itself on the edge of irrelevance. Even the introduction of Advanced Tactical Missile technology, solely a product of Clan Coyote, was not enough to catapult the Clan back into the spotlight.

The Khans needed something to help their touman, help their warriors on the battlefield, and help stabilize their decline. The future of the Clan was riding on the success of their next venture.

Designed as a bodyguard unit for heavier `Mechs, the Rabid Coyote was abjectly rejected upon arrival by the Warriors to which it was assigned. The concept that a BattleMech should play bodyguard and support to another BattleMech was one that Coyote Trueborns especially despised.

Regardless of the reception, the Rabid Coyote appears to be here to stay. Field tests and trials by fire have been positive for the new design, and Clan Coyote is committed to keeping the BattleMech in its ranks.

Armaments and Capabilities

Likely, at least in part, to further highlight their new technology, the Rabid Coyote‘s main armament is a single ATM 12 set in its left torso. The ATM has one ton of ammo for each type of ATM missile. This main weapon is backed up by four Medium Pulse Lasers, two in each arm, and an Electronic Countermeasure Suite (ECM) located near the cockpit. Ample armor protection, eight and a half tons of Ferro-Fibrous Armor, for a 55 ton BattleMech is provided, and battlefield staying power is backed up by its use of a standard engine, all mounted on an Endo Steel chassis. 12 Double Heat Sinks allow the Rabid Coyote to remain fairly cool when utilizing its entire arsenal.

This design on paper is as solid as they come. Perhaps a bit slow for a Clan Medium, in its intended role the 5/8 speed works out just fine, especially when compared to the speeds of the BattleMechs in whose company the Rabid Coyote is most commonly found.

Ursus

Rolling off the production in 3059, seven years before the Rabid Coyote appeared in Clan Coyote’s touman, the Ursus was a triumphant accomplishment for Khan Bjorn Jorgensson and for Clan Ghost Bear. The first Clan BattleMech produced completely within the Inner Sphere, the Ursus was designed to fill a painful gap in Clan Ghost Bear’s second line forces.

The Ursus was designed somewhat with a “less is more” mentality that enforced its purpose. Using simple technologies like a standard chassis and engine, the design is dependable and able to take a lot of punishment for a fifty ton Medium `Mech. Received well by the touman as a whole, the majority of the first production runs found assignment to units primarily along the Draconis Combine border and saw action against both DCMS and Clan Nova Cat forces.

While not specifically created as a bodyguard unit, as in the case of the Rabid Coyote, the Ursus still found use in the role as it was soon assigned to duty alongside larger and slower second line BattleMechs like the Kodiak and Grizzly. In this role, the uncharacteristically slower speed of the Ursus did not feel at all like a liability, and the machine continued to shine as a defensive unit. Many commanders now consider the Ursus to be a quintessential companion to slower Heavy and Assault second line BattleMechs.

Click on the picture to visit IronWind Metals and get your own Ursus.

Armament and Capabilities

Thanks in part to its smaller engine, and the use of eight and a half tons of Ferro-Fibrous Armor, the Ursus packs an arsenal of weaponry that outclasses almost any other Clan second line Medium and many OmniMechs of its weight class. Its main armaments are on its right arm, which houses an Extended Range Large Laser and two Medium Pulse Lasers. These are backed up at long and medium ranges, respectively, by an LRM 10 on its left arm and an SRM 6 mounted in its center torso. Adding a final touch to the brawler nature of the BattleMech, each side torso sports an Extended Range Medium Laser, adding to the design’s ability to engage effectively and decisively at medium range. Finally, the entire BattleMech is protected by an integrated Electronic Countermeasure Suite mounted in its right torso. 16 Double Heat Sinks allow the Ursus to stay just about as cool as the Rabid Coyote when using its vast array of weapons.

At first glance, it just doesn’t seem like it is possible to fit all of that into a fifty ton chassis, but there it is. The secret to the Ursus is in its speed. 4/6 is painfully slow even for some Clan Heavy `Mechs, but in its intended role as a defensive and bodyguard unit, the Ursus just plain does not need to worry about being speedy.

Head to Head

Each of these BattleMechs represents a different take on what are essentially similar battlefield roles. The Rabid Coyote was additionally designed to emphasize pursuit after a successful defense, and the Ursus was designed to maximize overall defensive capability and sturdiness supporting larger `Mechs. Both designs are most commonly seen in the company of heavier designs, providing escort and support for the larger machines.

Both `Mechs’ incorporation of ECM suites makes them invaluable on the battlefield in the company heavier units that are not commonly equipped with such countermeasures.

Also, it is highly unlikely that either of these two BattleMechs have ever seen each other on the battlefield. First, they are designed for the same role, not opposing roles, which means it would be more than exceedingly rare to see one or the other in an attacking force where the other is present among the defending forces. Mostly, though, is the fact that the Rabid Coyote is deployed by a Clan that is located totally in the Clan Homeworlds, and the Ursus is deployed by a Clan that is now completely located in the Inner Sphere. The Ursus was only ever produced in the Inner Sphere and was never transported to Clan space during the short time between its initial production and the Ghost Bears’ exodus from Clan space.

IronWind Metals has Rabid Coyote models, too!

While Clan Wolf did obtain the design from their Coyote friends some time before their ejection from Clan space, eventually deploying their own variant during the Jihad, it is still highly unlikely for the two BattleMechs to have met on the field of batter. But we can imagine what a heads up engagement between these two BattleMechs might have looked like.

I’ll give the long range game to the Ursus, even if slightly. Its ER Large Laser and LRM 10 are not affected by the Rabid Coyote‘s ECM Suite in the same way that the Ursus‘ ECM affects the Rabid Coyote‘s ATM 12 launcher. Fortunately for the Rabid Coyote because of its speed advantage over the slower Ghost Bear `Mech, the long range game should not last very long.

In the medium range, both BattleMechs enter each other’s real danger zones. The Rabid Coyote adds four Medium Pulse Lasers into the mix, where as the Ursus adds two Medium Pulse Lasers and 2 ER Medium Lasers. If accuracy becomes an issue, the Rabid Coyote has the edge at this point. Its greater movement based defense also helps to further mitigate the non-Pulse Laser part of the Ursus‘ battery. However, a few luckier hits at shorter ranges with the ER Large Laser could keep the Ursus well in the fight.

It is at short range that the Rabid Coyote might finally turn the tables on the Ursus in a convincing manner. The High Explosive missiles on its ATM 12 will begin to exact a heavy toll on the Ursus, which does gain the use of its regular SRM 6 at this range.

In my estimation of the two BattleMechs, if the Ursus can prolong the longer range engagement, keeping to long range and the far end of medium range, for as long as possible, it will keep the upper hand. However, once the Rabid Coyote is able to make use of its superior speed and close to short range, the power of ATM 12 system will likely overpower the Ursus‘ ability to answer back as effectively.

I know that at this point you might be thinking that I’m going to avoid outright declaring a winner in this fight, and you would be right to think so. Both of these BattleMechs are well armed and armored for their weight class, and in a medium weight, non-striker defensive role, they are both perfect in their own ways.

Final Thoughts

While not as widespread as other designs, both the Ursus and Rabid Coyote are available in certain places should you be looking for a flavorful addition to a unit.

The Ursus has found its way, in the form of the Ursus 2 variant, into the touman of Clan Hell’s Horses, and the original variant also traveled with many of the Ghost Bear Clusters gifted to the Republic of the Sphere after the Jihad. Of course, you can almost always come up with a reason to have any BattleMech in any force, especially a mercenary unit, and I would not be surprised to see the Ursus scattered about very thinly in the forces of the Draconis Combine, Clan Nova Cat, and even Clan Wolf. Salvage is a beautiful thing.

The Rabid Coyote only regularly appears among Clan Wolf forces in the Inner Sphere, but the Homeworld Clans Coyote and Cloud Cobra both field the design in large numbers. It is also not unheard of to see the design fielded by Clan Burrock and the Dark Caste. Like the Ursus, the design may have spread in very limited numbers, as salvage, from Clan Wolf and into the forces of Clans Jade Falcon, Ghost Bear, and Hell’s Horses, as well as even possibly into the LAAF.

If you play any of these factions, or you just really want an awesome and defensive Clan tech BattleMech, and you have the means, I highly recommend picking either one (or both!) up.

Want to Know More?

If you want to know more about either the Ursus or Rabid Coyote, check out the reference materials listed below:

BattleTech Technical Readout: 3060 on BattleCorps, DriveThruRPG, or Amazon.

BattleTech Technical Readout: 3067 on BattleCorps, DriveThruRPG, or Amazon.

Want to see me compare two other BattleMechs? Suggest a pairing in the comments, and if it strikes my fancy I might just write it!

4 Replies