Raptor (OmniMech)

This article is about the first Inner Sphere OmniMech. For other uses, see Raptor.

Raptor
Production information
Manufacturer	Luthien Armor Works - OmniMech Production Facility
Production Year	3052
Model	RTX1-O
Class	Light
Cost	3,917,448 C-bills
Technical specifications
'Mech type	Inner Sphere OmniMech
Mass	25 tons
Chassis	Alshain Type KR140 Endo Steel
Armor	StarSlab/4
Engine	Omni 175 XL
Communications System	Sipher CommCon SCU-9
Targeting Tracking System	Matabushi Stalker
Heat Sinks	10 double
Speed	118 km/h
Armament	Primary Configuration 3x LRM-5 2x machine gun 2x medium laser 2x small laser
BV (1.0)	655
BV (2.0)	721

Description

The Raptor was the first Inner Sphere OmniMech. Luthien Armor Works designed the Raptor as a proof of concept after months of studying OmniMech salvage recovered from the Battle of Luthien. The inherent ease of repair and ability to reconfigure loadout made the resulting OmniMech a premier recon and fast strike unit.

Weapons and Equipment

The Raptor is built on an Alshain Type KR140 endo steel chassis and uses a weight-saving Omni 175 XL engine, which gives the Raptor a top speed of 118.8 km/h. Three and a half tons of armor provides protection to the Raptor from most light weapons, but the Raptor relies more on its speed than anything else to protect it from taking damage, as this armor protection is thin.

The Primary configuration of the Raptor is built to engage an enemy at long ranges with its three LRM-5 launchers. In the case that the enemy somehow manages to close with the swift moving Raptor, the 'Mech carries two medium lasers and two small lasers. Additionally, in the primary configuration, the Raptor carries two machine guns to defend against infantry attacks.

Alternate Configurations

• Alternate Configuration A 

  The Raptor A is intended for extended operations from supply lines. As such, its primary weapons are two large lasers, supported in close range combat by three small lasers. BV (1.0) = 702, BV (2.0) = 783

• Alternate Configuration B 

  The B configuration carries three SRM-6 launchers and a small laser. This configuration is intended for close combat and works well in a vehicle-hunting role as well as in mop-up operations. BV (1.0) = 533, BV (2.0) = 613

• Alternate Configuration C 

  Configured for medium to close range combat, the C configuration of the Raptor is built to swoop in on a target and overwhelm an enemy with fire from its six medium lasers and two small pulse lasers; to deal with this large heat load it also adds two more double heat sinks. For missile defense, the Raptor C carried an anti-missile system. BV (1.0) = 780, BV (2.0) = 870

• Alternate Configuration D 

  Loaded with advanced electronic equipment, the D configuration carries a TAG laser designator, a Beagle active probe, and a C3 slave unit. The Raptor D is armed with a short-range arsenal of three Streak SRM-2 launchers and two small lasers, as well as two machine guns to deter infantry attacks. The combination of a Beagle active probe, TAG, and a C3 slave make the Raptor D an excellent point 'Mech for light C3 lances, since it is able to share targeting information with allied units and also find hidden units and designate them for highly accurate artillery fire. BV (1.0) = 428, BV (2.0) = 490

• Alternate Configuration E 

  A medium range missile barrage 'Mech, the E configuration carries three MRM-10 launchers with a single small laser as a backup weapon. BV (1.0) = 517, BV (2.0) = 597

• Alternate Configuration F 

  Similar to the C configuration, the F configuration of the Raptor carries five ER medium lasers and adds three additional double heat sinks. The Raptor F has added maneuverability with the addition of seven jump jets, allowing it to jump up to 210 meters. BV (1.0) = 959, BV (2.0) = 1,029

• Alternate Configuration G 

  This configuration uses a plasma rifle for its main weapon, backed up by a single ER small laser and a trio of small pulse lasers. BV (2.0) = 857

• Alternate Configuration R 

  A field upgrade developed in the midst of Operation Bulldog, this configuration utilized captured Clan Smoke Jaguar weapons to help bolster the SLDF forces in later waves. This configuration mounts an array of Clan-tech, utilizing an ER large laser and ER medium laser in each arm as well as an ER small laser beside a C3 slave unit in the center torso. BV (2.0) = 1,393

• Alternate Configuration U 

  This version carries a trio of ER medium lasers and a pair of SRT-4 launchers. To maximize its underwater speed, it's equipped with seven UMUs. BV (2.0) = 914

Design Quirks

The Raptor has the following Design Quirk:

• Easy to Maintain

Related BattleMechs

• Raptor II - Little related other than in name, the Raptor II is basically a hyper-advanced, enlarged, non-Omni Raptor designed by the Word of Blake to test and utilize the Void Signature system.

Notable Pilots

See Category:Notable Raptor Pilots

Notes

• In German products, the unit's proper name was translated to Raubvogel. The model code was accordingly changed to RBV1-O.

Gallery

• 

  Original Raptor from TRO:3058

• 

  Raptor from TRO:3058 Upgrade

• 

  RTX1-OA Raptor in combat from CCG

• 

  RTX1-OE Raptor in battle from CCG

Bibliography

• The Dragon Roars
• Master Unit List
• Master Unit List: Battle Values
• Record Sheets: 3055/3058
• Record Sheets: 3058 Unabridged (Inner Sphere)
• Record Sheets: 3058 Upgrades
• Record Sheets: 3060
• Record Sheets: 3067
• Record Sheets: 3085 Unabridged — Old is the New New
• Technical Readout: 3058
• Technical Readout: 3058 Upgrade