Difference between revisions of "Marauder"

(merged notes sections)
m (Added info from BattleTech: Battle of Tukayyid)
(27 intermediate revisions by 16 users not shown)
Line 3: Line 3:
 
|image=3025-Marauder-Classics.png
 
|image=3025-Marauder-Classics.png
 
|name=Marauder
 
|name=Marauder
|manufacturer=[[General Motors]]<ref>''Handbook House Davion'' p.187</ref><br/> [[Bowie Industries]], [[Ceres Metal Industries]],<br/> [[Gibson Federated BattleMechs]],<br/> [[Ibuki Robotics & Manufacturing]],<br/> [[Independence Weaponry]],<br/> [[Majesty Metals and Manufacturing]],<br/> [[Ronin Incorporated]],<br/> [[Taurus Territorial Industries]]
+
|manufacturer=
 +
[[General Motors]]<ref>''Handbook House Davion'' p.187</ref>
 +
----
 +
[[Bowie Industries]]<ref>''Objectives: Lyran Alliance p.7</ref>
 +
----
 +
[[Ceres Metal Industries]]<ref>''Objectives: Capellan Confederation p.24</ref>
 +
----
 +
[[Gibson Federated BattleMechs]]
 +
----
 +
[[Ibuki Robotics & Manufacturing]]<ref>''Objectives: Draconis Combine p.30</ref>
 +
----
 +
[[Independence Weaponry]]
 +
----
 +
[[Majesty Metals and Manufacturing]]<ref>''Objectives: Periphery p.16</ref>
 +
----
 +
[[Ronin Incorporated]]
 +
----
 +
[[Taurus Territorial Industries]]
 +
----
 +
[[Vandenberg Mechanized Industries]] <ref>''Objectives: Periphery p.7</ref>
 +
----
 +
[[Pinard Protectorates Limited]] <ref>''Objectives: Periphery p.9</ref>
 +
----
 
|model=MAD-3R
 
|model=MAD-3R
 
|cost= 6,635,125 C-bills
 
|cost= 6,635,125 C-bills
Line 48: Line 70:
  
 
*;MAD-2R : This upgrade of the 1R eventually replaced it in [[2760]]. The PPCs were upgraded to [[ER PPC]]s, necessitating a similar upgrade of the heat sinks to [[double heat sink]]s.<ref name=TRO3075 /> BV (2.0) = 1,630<ref>''Record Sheets: 3075 Unabridged'', p. 179</ref><ref>''Record Sheets: 3075 Unabridged - Age of War'', p. 29</ref>
 
*;MAD-2R : This upgrade of the 1R eventually replaced it in [[2760]]. The PPCs were upgraded to [[ER PPC]]s, necessitating a similar upgrade of the heat sinks to [[double heat sink]]s.<ref name=TRO3075 /> BV (2.0) = 1,630<ref>''Record Sheets: 3075 Unabridged'', p. 179</ref><ref>''Record Sheets: 3075 Unabridged - Age of War'', p. 29</ref>
 +
 +
*;MAD-2T : A [[Taurian Concordat]] version of the Royal ''Marauder'' that swaps the standard autocannon for an [[LB 5-X]].<ref name=rg6p6>''Recognition Guide: ilClan, vol. 6'', p. 6</ref> BV (2.0) = 1,646<ref>''Recognition Guide: ilClan, vol. 6'', p. 21</ref>
  
 
*;MAD-3D : The 3D ''Marauder'' was a modification of the 'Mech introduced for House Davion in [[2834]] which removed its ammunition dependency. In order to do this, the 3D replaced the Autocannon/5 with a [[Large Laser]]. The saved weight was used to add four more heat sinks to the 'Mech to handle the added heat burden from the large laser.<ref name=TRO3025/><ref>''Record Sheets: Phoenix Upgrades'', p. 202</ref> BV (1.0) = 1,136,<ref name=COFS>''Combat Operations'', p. 127</ref> BV (2.0) = 1,470<ref name=MUL125>''Master Unit List: Battle Values'', p. 125</ref><ref>''Record Sheets: 3039 Unabridged'', p. 490</ref>
 
*;MAD-3D : The 3D ''Marauder'' was a modification of the 'Mech introduced for House Davion in [[2834]] which removed its ammunition dependency. In order to do this, the 3D replaced the Autocannon/5 with a [[Large Laser]]. The saved weight was used to add four more heat sinks to the 'Mech to handle the added heat burden from the large laser.<ref name=TRO3025/><ref>''Record Sheets: Phoenix Upgrades'', p. 202</ref> BV (1.0) = 1,136,<ref name=COFS>''Combat Operations'', p. 127</ref> BV (2.0) = 1,470<ref name=MUL125>''Master Unit List: Battle Values'', p. 125</ref><ref>''Record Sheets: 3039 Unabridged'', p. 490</ref>
Line 57: Line 81:
 
*;MAD-3R (C) : A [[Clan]]-tech retrofit of the classic MAD-3R ''Marauder'', designed for use by second-line garrison and [[solahma]] forces, the ''Marauder C'' replaced some of the Inner Spheroid weaponry with Clan equivalents. The ''Marauder C'' swapped the PPCs for a pair of Clan-tech [[Large Pulse Laser]]s and the standard autocannon for a [[Ultra AC/5]] model, but retained the IS medium lasers.  The munitions for the autocannon were also protected with [[CASE]].<ref name=BFT>''[[The Battle for Twycross]]'', p. 48</ref>  BV (2.0) = 1,616<ref>''Record Sheets: 3085 Unabridged — Project Phoenix'', p. 191</ref>
 
*;MAD-3R (C) : A [[Clan]]-tech retrofit of the classic MAD-3R ''Marauder'', designed for use by second-line garrison and [[solahma]] forces, the ''Marauder C'' replaced some of the Inner Spheroid weaponry with Clan equivalents. The ''Marauder C'' swapped the PPCs for a pair of Clan-tech [[Large Pulse Laser]]s and the standard autocannon for a [[Ultra AC/5]] model, but retained the IS medium lasers.  The munitions for the autocannon were also protected with [[CASE]].<ref name=BFT>''[[The Battle for Twycross]]'', p. 48</ref>  BV (2.0) = 1,616<ref>''Record Sheets: 3085 Unabridged — Project Phoenix'', p. 191</ref>
  
*;MAD-4X : This experimental variant was made at [[Ronin Incorporated]]'s facility on [[Wallis]] in [[3039]]. Techs removed the standard weaponry from a ''Marauder'' and replaced the arm mounted weapons with a [[Binary Laser Cannon]] in each arm, while the torso mounted autocannon was replaced by twin [[SRM-6]] launchers backed by one ton of ammunition. The ''Marauder''-4X was also noteworthy because it used a [[Prototype Endo Steel]] chassis. To keep the heat under control, technicians installed twelve single heat sinks and six prototype Double Heat Sinks.<ref name=XTRO:SWp7>''Experimental Technical Readout: Succession Wars, Volume 1'', p. 7</ref>
+
*;MAD-4X : This experimental variant was made at [[Ronin Incorporated]]'s facility on [[Wallis]] in [[3039]]. Techs removed the standard weaponry from a ''Marauder'' and replaced the arm mounted weapons with a [[Binary Laser Cannon]] in each arm, while the torso mounted autocannon was replaced by twin [[SRM-6]] launchers backed by one ton of ammunition for each launcher. The ''Marauder''-4X was also noteworthy because it used a [[Prototype Endo Steel]] chassis. To keep the heat under control, technicians installed twelve single heat sinks and six prototype Double Heat Sinks.<ref name=XTRO:SWp7>''Experimental Technical Readout: Succession Wars, Volume 1'', p. 7</ref>
 +
 
 +
*;MAD-5CS : Developed by [[ComStar]] for the [[Battle of Tukayyid]], this ''Marauder'' variant has an [[ER PPC]] and [[Medium Pulse Laser]] in each arm. The class 5 autocannon is replaced by an [[LB 10-X]] autocannon with two tons of ammunition. To make room for the new weapons and the eighteen double heat sinks, ComStar techs installed a 300 [[XL Engine]]. BV (2.0) = 1,648<ref>''BattleTech: Battle of Tukayyid'', pp. 172-173</ref>
 +
 
 +
*;MAD-5D : The 5D ''Marauder'' was the first updated variant to be designed in the wake of the Helm Memory Core recovery, coming off the factory lines in [[3051]].  A direct upgrade of the 3D model, the 5D's engine was replaced with a General Motors 300 [[XL Engine]], retaining the same speed profile at a much-reduced weight, to allow the entire weapons payload to be stripped out and upgraded. The 5D's primary weapons were two [[Defiance 1001]] [[ER PPC]]s, carried in either arm, supported by a [[Sutel Precision Line]] [[Large Pulse Laser]] in place of the autocannon.  The medium lasers were replaced with two Sutel Precision Line [[Medium Pulse Laser]]s, while a [[Federated SuperStreak]] [[Streak SRM-2]] launcher was also added to the left torso, along with one ton of [[CASE]]-protected ammo, for more close-range firepower. The model was protected by fourteen tons of armor, mostly added to the legs and side torsos, and carried sixteen double heat sinks for heat management.  It also had a jumping capability of up to 120 meters thanks to four [[jump jet]]s mounted in its legs.  When the Kuritans captured Quentin, Independence Weaponry began building the 5D to augment their forces; unwilling to completely let go of the design, General Motors also built the 5D for FedCom forces out of [[Kathil]].<ref name=TRO3050/><ref>''Record Sheets: Phoenix Upgrades'', p. 206</ref> BV (1.0) = 1,504,<ref name=COFS /> BV (2.0) = 1,787<ref>''Record Sheets: 3085 Unabridged — Project Phoenix'', p. 176</ref>
  
*;MAD-5D : The 5D ''Marauder'' was the first updated variant to be designed in the wake of the Helm Memory Core recovery, coming off the factory lines in [[3051]].  A direct upgrade of the 3D model, the 5D's engine was replaced with a General Motors 300 [[XL Engine]], retaining the same speed profile at a much-reduced weight, to allow the entire weapons payload to be stripped out and upgraded. The 5D's primary weapons were two [[Defiance 1001]] ER PPCs, carried in either arm, supported by a [[Sutel Precision Line]] [[Large Pulse Laser]] in place of the autocannon.  The medium lasers were replaced with two Sutel Precision Line [[Medium Pulse Laser]]s, while a [[Federated SuperStreak]] [[Streak SRM-2]] launcher was also added to the left torso, along with one ton of [[CASE]]-protected ammo, for more close-range firepower. The model was protected by fourteen tons of armor, mostly added to the legs and side torsos, and carried sixteen double heat sinks for heat management.  It also had a jumping capability of up to 120 meters thanks to four [[jump jet]]s mounted in its legs.  When the Kuritans captured Quentin, Independence Weaponry began building the 5D to augment their forces; unwilling to completely let go of the design, General Motors also built the 5D for FedCom forces out of [[Kathil]].<ref name=TRO3050/><ref>''Record Sheets: Phoenix Upgrades'', p. 206</ref> BV (1.0) = 1,504,<ref name=COFS /> BV (2.0) = 1,787<ref>''Record Sheets: 3085 Unabridged — Project Phoenix'', p. 176</ref>
+
*;MAD-5D-DC : The 5D-DC strips out the Streak launcher, ammunition, CASE, and one heat sink from a ''Marauder''-5D to make room for a [[Command Console]].<ref name=rg6p6/> BV (2.0) = 1,787<ref>''Recognition Guide: ilClan, vol. 6'', p. 23</ref>
  
 
*;MAD-5L : The 5L variant of the 'Mech was the first natively-produced ''Marauder'' variant for the Capellan Confederation.  Introduced in early July [[3067]] and built from the Ceres Metals factories on [[Warlock]] and [[Capella]], the 5L removed the entire weapons payload of the original and upgraded its weapons, armor, and heat sinks. Built on a Ceres Metals Lite chassis with a Rawlings 300 fusion engine, the 'Mech was armored with fourteen tons of Ceres Heavy [[Stealth Armor]] backed up by a [[Guardian ECM Suite]]. The 'Mech carried two [[Martell]] [[ER Large Laser]]s and two [[Ceres Arms]] [[ER Medium Laser]]s in its arms and, in place of the autocannon, a [[Ceres Arms Warrior]] [[ER PPC]]. The heat from the 5L's all-energy arsenal was handled by eighteen [[double heat sink]]s. Additionally, the 5L was built using [[Triple Strength Myomer]], allowing the 'Mech to run at speeds of up to 86 km/h when it was operating in its optimum heat range.  The electronics were also replaced with a Ceres Metals Model 666 comms system and Ceres Bullseye tracking system.  <ref>''Record Sheets: Phoenix Upgrades'', p. 207</ref><ref>''Technical Readout: Project Phoenix'', p. 37</ref> BV (1.0) = 1,614,<ref name=COCC /> BV (2.0) = 2,286<ref>''Record Sheets: 3085 Unabridged — Project Phoenix'', p. 177</ref>
 
*;MAD-5L : The 5L variant of the 'Mech was the first natively-produced ''Marauder'' variant for the Capellan Confederation.  Introduced in early July [[3067]] and built from the Ceres Metals factories on [[Warlock]] and [[Capella]], the 5L removed the entire weapons payload of the original and upgraded its weapons, armor, and heat sinks. Built on a Ceres Metals Lite chassis with a Rawlings 300 fusion engine, the 'Mech was armored with fourteen tons of Ceres Heavy [[Stealth Armor]] backed up by a [[Guardian ECM Suite]]. The 'Mech carried two [[Martell]] [[ER Large Laser]]s and two [[Ceres Arms]] [[ER Medium Laser]]s in its arms and, in place of the autocannon, a [[Ceres Arms Warrior]] [[ER PPC]]. The heat from the 5L's all-energy arsenal was handled by eighteen [[double heat sink]]s. Additionally, the 5L was built using [[Triple Strength Myomer]], allowing the 'Mech to run at speeds of up to 86 km/h when it was operating in its optimum heat range.  The electronics were also replaced with a Ceres Metals Model 666 comms system and Ceres Bullseye tracking system.  <ref>''Record Sheets: Phoenix Upgrades'', p. 207</ref><ref>''Technical Readout: Project Phoenix'', p. 37</ref> BV (1.0) = 1,614,<ref name=COCC /> BV (2.0) = 2,286<ref>''Record Sheets: 3085 Unabridged — Project Phoenix'', p. 177</ref>
Line 67: Line 95:
 
*;MAD-5R : The ''Marauder'' 5R was an upgrade of the 3R model introduced in [[3068]]. The 'Mech carried an XL engine to save weight and its heat sinks upgraded to double-strength models. The PPCs were replaced with two ER PPCs and the Autocannon/5 upgraded to a [[Rotary Autocannon/5]]; the two medium lasers of the original were retained. Also, for added protection, the 5R mounted fourteen tons of armor and a Guardian ECM Suite. The 'Mech also carries a [[C3 Slave]] unit that allows the 'Mech to transmit targeting data to its lance mates.<ref>''Record Sheets: Phoenix Upgrades'', p. 209</ref> BV (1.0) = 1,548 (C3: 279),<ref name=COFS /> BV (2.0) = 1,877<ref>''Record Sheets: 3085 Unabridged — Project Phoenix'', p. 179</ref>
 
*;MAD-5R : The ''Marauder'' 5R was an upgrade of the 3R model introduced in [[3068]]. The 'Mech carried an XL engine to save weight and its heat sinks upgraded to double-strength models. The PPCs were replaced with two ER PPCs and the Autocannon/5 upgraded to a [[Rotary Autocannon/5]]; the two medium lasers of the original were retained. Also, for added protection, the 5R mounted fourteen tons of armor and a Guardian ECM Suite. The 'Mech also carries a [[C3 Slave]] unit that allows the 'Mech to transmit targeting data to its lance mates.<ref>''Record Sheets: Phoenix Upgrades'', p. 209</ref> BV (1.0) = 1,548 (C3: 279),<ref name=COFS /> BV (2.0) = 1,877<ref>''Record Sheets: 3085 Unabridged — Project Phoenix'', p. 179</ref>
  
*;MAD-5S : The 5S variant of the ''Marauder'' dates to the [[Clan Invasion]], introduced in 3051 by Bowie Industries after the Draconis Combine captured plans for the 5D design. The variant was built around an XL engine to save weight and upgraded the heat sinks to double-strength models. Like the 5D, the 5S carried ER PPCs and medium pulse lasers, but replaced the autocannon with a [[Poland Main Model A]][[Gauss Rifle]].  One ton of ammunition for this powerful, long-ranged weapon was carried in the left torso.<ref>''Record Sheets: Phoenix Upgrades'', p. 210</ref> BV (1.0) = 1,466,<ref name=COFS /><ref name=COLA>''Combat Operations'', p. 132</ref> BV (2.0) = 1,799<ref>''Record Sheets: 3085 Unabridged — Project Phoenix'', p. 180</ref>
+
*;MAD-5S : The 5S variant of the ''Marauder'' dates to the [[Clan Invasion]], introduced in 3051 by Bowie Industries after the Draconis Combine captured plans for the 5D design. The variant was built around an XL engine to save weight and upgraded the heat sinks to double-strength models. Like the 5D, the 5S carried ER PPCs and medium pulse lasers, but replaced the autocannon with a [[Poland Main Model A]] [[Gauss Rifle]].  One ton of ammunition for this powerful, long-ranged weapon was carried in the left torso.<ref>''Record Sheets: Phoenix Upgrades'', p. 210</ref> BV (1.0) = 1,466,<ref name=COFS /><ref name=COLA>''Combat Operations'', p. 132</ref> BV (2.0) = 1,799<ref>''Record Sheets: 3085 Unabridged — Project Phoenix'', p. 180</ref>
  
 
*;MAD-5T : The 5T variant of the ''Marauder'' featured elements of both the 5M and the 5R models when it was introduced in 3068. The 5T was built around an [[Endo Steel]] chassis and an XL engine to save weight. The 'Mech carries, as its primary weapons, two large pulse lasers, backed up by two medium pulse lasers and a Rotary Autocannon/5 in the torso mount. The weapons are all linked to an advanced [[Targeting Computer]], making the 5T incredibly accurate. Finally, the 5T is protected by fourteen tons of armor.<ref>''Record Sheets: Phoenix Upgrades'', p. 211</ref> BV (1.0) = 1,390,<ref name=COFS /> BV (2.0) = 1,750<ref>''Record Sheets: 3085 Unabridged — Project Phoenix'', p. 181</ref>
 
*;MAD-5T : The 5T variant of the ''Marauder'' featured elements of both the 5M and the 5R models when it was introduced in 3068. The 5T was built around an [[Endo Steel]] chassis and an XL engine to save weight. The 'Mech carries, as its primary weapons, two large pulse lasers, backed up by two medium pulse lasers and a Rotary Autocannon/5 in the torso mount. The weapons are all linked to an advanced [[Targeting Computer]], making the 5T incredibly accurate. Finally, the 5T is protected by fourteen tons of armor.<ref>''Record Sheets: Phoenix Upgrades'', p. 211</ref> BV (1.0) = 1,390,<ref name=COFS /> BV (2.0) = 1,750<ref>''Record Sheets: 3085 Unabridged — Project Phoenix'', p. 181</ref>
  
 
*;MAD-6L : An upgrade of the 5L introduced in [[3070]], the 6L replaced the lasers with a pair of [[Ceres Arms Crusher]] [[Plasma Rifle]]s. The particle cannon was also downgraded to a standard Hellstar PPC. The Stealth Armor and attendant Guardian ECM Suite and Triple Strength Myomers were retained, though three less double heat sinks were used.<ref>''Record Sheets: Phoenix Upgrades'', p. 212</ref><ref name=BC /><ref>''Technical Readout: 3085'', p. 261</ref> BV (2.0) = 2,322<ref>''Record Sheets: 3085 Unabridged — Project Phoenix'', p. 182</ref>
 
*;MAD-6L : An upgrade of the 5L introduced in [[3070]], the 6L replaced the lasers with a pair of [[Ceres Arms Crusher]] [[Plasma Rifle]]s. The particle cannon was also downgraded to a standard Hellstar PPC. The Stealth Armor and attendant Guardian ECM Suite and Triple Strength Myomers were retained, though three less double heat sinks were used.<ref>''Record Sheets: Phoenix Upgrades'', p. 212</ref><ref name=BC /><ref>''Technical Readout: 3085'', p. 261</ref> BV (2.0) = 2,322<ref>''Record Sheets: 3085 Unabridged — Project Phoenix'', p. 182</ref>
 +
 +
*;MAD-7C : This ''Marauder'' variant carries an ER PPC and [[Medium X-Pulse Laser]] in each arm. The torso cannon is a [[Light Gauss Rifle]] protected by [[CASE II]] and one ton of ammunition. A [[C3 Slave]] module is in the head and a [[Guardian ECM Suite]] is in the right torso. BV (2.0) = 1,810<ref>''Recognition Guide: ilClan, vol. 6'', p. 26</ref>
  
 
*;MAD-7D : Another [[House Davion|Davion]] upgrade of the ''Marauder'', the 7D was built in 3068 with an XL engine to save weight. The 'Mech was armed with two ER large lasers and two ER medium lasers, as well as a Rotary Autocannon/5. These were all linked to a [[Targeting Computer]], making the 7D extremely accurate. The 'Mech also carried an ECM Suite for protection against electronic warfare equipment and was armored with fourteen tons of armor.<ref>''Record Sheets: Phoenix Upgrades'', p. 213</ref> BV (1.0) = 1,582,<ref name=COFS /> BV (2.0) = 1,986<ref>''Record Sheets: 3085 Unabridged — Project Phoenix'', p. 183</ref>
 
*;MAD-7D : Another [[House Davion|Davion]] upgrade of the ''Marauder'', the 7D was built in 3068 with an XL engine to save weight. The 'Mech was armed with two ER large lasers and two ER medium lasers, as well as a Rotary Autocannon/5. These were all linked to a [[Targeting Computer]], making the 7D extremely accurate. The 'Mech also carried an ECM Suite for protection against electronic warfare equipment and was armored with fourteen tons of armor.<ref>''Record Sheets: Phoenix Upgrades'', p. 213</ref> BV (1.0) = 1,582,<ref name=COFS /> BV (2.0) = 1,986<ref>''Record Sheets: 3085 Unabridged — Project Phoenix'', p. 183</ref>
 +
 +
*;MAD-7M : Developed in the Free Worlds League during the [[Jihad]], this derivative of the -5M carries a [[Heavy PPC]] and ER Medium Laser in each arm. The dorsal cannon is reduced to an LB 5-X with a ton of ammunition protected by CASE. It has fifteen double heat sinks and retains the 120 meter jump radius of the -5M.<ref name=rg6p6/> BV (2.0) = 1,908<ref>''Recognition Guide: ilClan, vol. 6'', p. 27</ref>
 +
 +
*;MAD-7R : This ''Marauder'' variant is nearly identical to the MAD-7C in that it carries an ER PPC and [[Medium X-Pulse Laser]] in each arm. The torso cannon is a [[Light Gauss Rifle]] protected by [[CASE II]]. It retains the [[Guardian ECM Suite]] but the C3 slave module has been replaced by an additional ton of Light Gauss Rifle ammunition, providing thirty-two shots. BV (2.0) = 1,832<ref>''Recognition Guide: ilClan, vol. 6'', p. 28</ref>
 +
 +
*;MAD-7S : Like the -7C this Lyran Commonwealth version has an ER PPC and [[Medium X-Pulse Laser]] in each arm. The torso cannon is a [[Gauss Rifle]] protected by [[CASE II]]. Two tons of Gauss Rifle ammo are carried. BV (2.0) = 1,903<ref>''Recognition Guide: ilClan, vol. 6'', p. 29</ref>
  
 
*;MAD-9D : Introduced during the [[Dark Age]], this version of the ''Marauder'' carried a Clan-built [[ER Large Laser]] in each arm, supported by a [[Medium X-Pulse Laser]]. A [[Silver Bullet Gauss Rifle]] replaced the old autocannon. To handle the heat load, the 9D carries sixteen double heat sinks mated to a [[Radical Heat Sink System]]. To provide weight for all the weapons and equipment, engineers had to use an [[Endo-Composite]] skeleton, XL Engine, and [[XL Gyro]]. BV (2.0) = 1,967<ref>''Record Sheets: 3145 New Tech, New Upgrades'', p. 159</ref>
 
*;MAD-9D : Introduced during the [[Dark Age]], this version of the ''Marauder'' carried a Clan-built [[ER Large Laser]] in each arm, supported by a [[Medium X-Pulse Laser]]. A [[Silver Bullet Gauss Rifle]] replaced the old autocannon. To handle the heat load, the 9D carries sixteen double heat sinks mated to a [[Radical Heat Sink System]]. To provide weight for all the weapons and equipment, engineers had to use an [[Endo-Composite]] skeleton, XL Engine, and [[XL Gyro]]. BV (2.0) = 1,967<ref>''Record Sheets: 3145 New Tech, New Upgrades'', p. 159</ref>
Line 86: Line 122:
  
 
*;MAD-9W2 : Based on captured [[Word of Blake]] plans formerly owned by [[Vicore Industries]], the MAD-9W2 carried twin ER large lasers and medium pulse lasers, supported by a single snub-nose PPC. To offset a lower top speed, this ''Marauder'' mounted five [[Improved Jump Jet]]s. A [[Heavy Duty Gyro]] enhanced battlefield longevity, while a [[Guardian ECM Suite]] and [[C3 Slave]] maximized its electronics performance. A [[Light Fusion Engine]] provided weight savings to allow all these upgrades. BV (2.0) = 1,868<ref>''Technical Readout: 3085'', p. 261</ref>
 
*;MAD-9W2 : Based on captured [[Word of Blake]] plans formerly owned by [[Vicore Industries]], the MAD-9W2 carried twin ER large lasers and medium pulse lasers, supported by a single snub-nose PPC. To offset a lower top speed, this ''Marauder'' mounted five [[Improved Jump Jet]]s. A [[Heavy Duty Gyro]] enhanced battlefield longevity, while a [[Guardian ECM Suite]] and [[C3 Slave]] maximized its electronics performance. A [[Light Fusion Engine]] provided weight savings to allow all these upgrades. BV (2.0) = 1,868<ref>''Technical Readout: 3085'', p. 261</ref>
 +
 +
*;MAD-11D : Produced by the Federated Suns, this ''Marauder'' uses an [[Endo-Composite]] skeleton, [[XL Gyro]], and XL engine to free weight. A [[Clan]]-spec ER PPC is in each arm, supported by a Medium X-Pulse Laser. A [[Silver Bullet Gauss Rifle]] with two tons of ammunition is protected by [[CASE II]]. Seventeen double heat sinks keep the weapon heat under control. BV (2.0) = 2,263<ref>''Recognition Guide: ilClan, vol. 6'', p. 30</ref>
 +
 +
*;MAD-BR-O ''OmniMarauder'' : The theoretical outcome of a [[3135]] "Future Marauder Feasibility Study" for GM by [[Luke Schteele]], on-loan from Bander BattleMechs, the ''OmniMarauder'' is a cutting edge Clan-tech rebuild and conversion of the iconic design as a [[OmniMech]]. Protected by sixteen and half tons of [[Ferro-Lamellor]] armor and built around a Clan-grade Endo Steel frame, a Clan 300 XL Engine, Inner Sphere Compact Gyro and twelve Clan Double Heat Sinks allow the MAD-BR-O to retain thirty-five and half tons of pod space. Two Configurations were suggested by Schteele and while certainly more lethal than any ''Marauder'' to date, the result is also prohibitively expensive and unlikely to ever see production.<ref name=ETRCEp16>''Experimental Technical Readout: Caveat Emptor'', pp. 16-17 "MAD-BR-O : ''OmniMarauder''"</ref>
 +
::*Prime - A modern take on the MAD-3R layout, the ''OmniMarauder'' Prime carries a Clan ER PPC and ER Medium in each arm in support of a [[HAG 30]] in the right torso. With the mammoth HAG protected by [[CASE II]], three tons of HAG munitions and four extra double heat sinks keep the Prime in the think of the fighting. BV (2.0) = 2,836<ref name=ETRCEp16/>
 +
::*Alternate Configuration A - The ''OmniMarauder'' A is built around Inner Sphere weapons as yet unsurpassed by the Clans, carrying a Plasma Rifle and a ton of reloads in each arm supported by as mammoth [[Heavy Gauss Rifle]] split between the right and center torsos, fed from two tons of HGR rounds. Clan-grade CASE II in the right and center torsos to shield the pilot against the massive cannon exploding and a Clan [[Light TAG]] round out the design. BV (2.0) = 2,127<ref name=ETRCEp16/>
  
 
*[[Dual Cockpit]] refits: The ''Marauder'' was one of the [[Free Worlds League]]'s preferred 'Mechs to install Dual Cockpits. Standard refits usually install the Dual Cockpit on a MAD-3M or MAD-5D, removing one heat sink.
 
*[[Dual Cockpit]] refits: The ''Marauder'' was one of the [[Free Worlds League]]'s preferred 'Mechs to install Dual Cockpits. Standard refits usually install the Dual Cockpit on a MAD-3M or MAD-5D, removing one heat sink.
Line 92: Line 134:
 
*;MAD-SD ''Marauder'' Douglas : The personal 'Mech of [[12th Vegan Rangers]] Alpha Regiment commander [[Margrave]] [[Sheridan Douglass]] during the [[DCMS]]'s [[Third Succession War]] invasion of [[Galtor III]], only the arm mounted medium lasers remain, with each PPC replaced by a large laser and the autocannon swapped for a pair of [[SRM-4]] launchers with a shared ton of reloads. The remaining weight and space was devoted to five additional heat sinks and three extra tons of armor.  BV (2.0) = 1,459<ref name="HTPG">''Historical Turning Points: Galtor'', p. 21</ref>
 
*;MAD-SD ''Marauder'' Douglas : The personal 'Mech of [[12th Vegan Rangers]] Alpha Regiment commander [[Margrave]] [[Sheridan Douglass]] during the [[DCMS]]'s [[Third Succession War]] invasion of [[Galtor III]], only the arm mounted medium lasers remain, with each PPC replaced by a large laser and the autocannon swapped for a pair of [[SRM-4]] launchers with a shared ton of reloads. The remaining weight and space was devoted to five additional heat sinks and three extra tons of armor.  BV (2.0) = 1,459<ref name="HTPG">''Historical Turning Points: Galtor'', p. 21</ref>
  
*;MAD-7D ''Marauder'' Von Staskov : The personal 'Mech of [[Calderon's Commando]] commander [[Marshal]] [[Vrabel von Staskov]] circa [[3088]], an ER PPC and Medium Laser are mounted in each arm, supported by a center torso mounted [[Light AC/5]] fed from a single ton of reloads. Built around a 300 rated Light Fusion Engine and clad in [[Light Ferro-Fibrous]] armor, von Staskov's 'Mech is fitted with Double Heat Sinks, Jump Jets and Triple Strength Myomer.<ref name=OTPFR-39>''Operation Turning Points: Fronc Reaches'', p. 39 "Marauder MAD-7D (Von Staskov)"</ref>
+
*;MAD-7D ''Marauder'' Von Staskov : The personal 'Mech of [[Calderon's Commando]] commander [[Marshal (rank)|Marshal]] [[Vrabel von Staskov]] circa [[3088]], an ER PPC and Medium Laser are mounted in each arm, supported by a center torso mounted [[Light AC/5]] fed from a single ton of reloads. Built around a 300 rated Light Fusion Engine and clad in [[Light Ferro-Fibrous]] armor, von Staskov's 'Mech is fitted with Double Heat Sinks, Jump Jets and Triple Strength Myomer.<ref name=OTPFR-39>''Operation Turning Points: Fronc Reaches'', p. 39 "Marauder MAD-7D (Von Staskov)"</ref>
  
 
*;Bounty Hunter model (3015) : This unusual variant piloted by the [[Bounty Hunter]] featured various lostech equipment: the standard 300 Vlar fusion engine was downgrade to a 225-rated version giving it a top speed of 54 kph. It mounted a standard [[PPC]] and a [[Medium Laser]] in each arm while another PPC and medium laser were mounted on the right torso; additional medium lasers were mounted in the center and left torso. Sixteen double heat sinks were use to cool this beast down, allowing it to firing all 3 PPCs without even generating excess heat. It featured fourteen and a half tons of standard armor, giving it maximum armor for its weight, and was capable of jumping over 90 meters with three jump jets. It was also painted all green with credit symbols. BV (1.0) = 1,686 BV (2.0) = 1,919<ref>''Record Sheets: 3085 Unabridged — Project Phoenix'', p. 189</ref>
 
*;Bounty Hunter model (3015) : This unusual variant piloted by the [[Bounty Hunter]] featured various lostech equipment: the standard 300 Vlar fusion engine was downgrade to a 225-rated version giving it a top speed of 54 kph. It mounted a standard [[PPC]] and a [[Medium Laser]] in each arm while another PPC and medium laser were mounted on the right torso; additional medium lasers were mounted in the center and left torso. Sixteen double heat sinks were use to cool this beast down, allowing it to firing all 3 PPCs without even generating excess heat. It featured fourteen and a half tons of standard armor, giving it maximum armor for its weight, and was capable of jumping over 90 meters with three jump jets. It was also painted all green with credit symbols. BV (1.0) = 1,686 BV (2.0) = 1,919<ref>''Record Sheets: 3085 Unabridged — Project Phoenix'', p. 189</ref>
  
 
*;Bounty Hunter model (3044) : The Bounty Hunter upgraded his ''Marauder'' sometime in [[3044]].  The fusion engine was upgraded to an extra-light version while keeping it at the same rating to save weight, though the increased size meant three heat sinks had to be removed. The standard PPCs were upgraded to ER PPCs, both the left and right torso-mounted medium lasers were removed while the center torso medium laser was moved to the head to make room for a [[Gauss Rifle]] on the right torso and two tons of ammunition. This upgrade allowed the Bounty Hunter to engage enemies at a far greater range while still able to continuously operate without fear of overheating. BV (1.0) = 1,788 BV (2.0) = 2,103<ref>''Record Sheets: 3085 Unabridged — Project Phoenix'', p. 190</ref>
 
*;Bounty Hunter model (3044) : The Bounty Hunter upgraded his ''Marauder'' sometime in [[3044]].  The fusion engine was upgraded to an extra-light version while keeping it at the same rating to save weight, though the increased size meant three heat sinks had to be removed. The standard PPCs were upgraded to ER PPCs, both the left and right torso-mounted medium lasers were removed while the center torso medium laser was moved to the head to make room for a [[Gauss Rifle]] on the right torso and two tons of ammunition. This upgrade allowed the Bounty Hunter to engage enemies at a far greater range while still able to continuously operate without fear of overheating. BV (1.0) = 1,788 BV (2.0) = 2,103<ref>''Record Sheets: 3085 Unabridged — Project Phoenix'', p. 190</ref>
 +
 +
*;Bounty Hunter model (3138) : Sometime after 3044, the Bounty Hunter was able to source Clan equipment. Each of the ''Marauder's'' arms carries a Clan-grade ER PPC supported by a Medium Laser. The Gauss Rifle has also been replaced by a Clan-grade model with one ton of ammunition. Four jump jets remain installed and fifteen double heat sinks have been installed. BV (2.0) = 2,708<ref>''Recognition Guide: ilClan, vol. 6'', p. 34</ref>
 +
 +
*;Red Hunter (3146) : Piloted by a descendant of [[Hassid Ricol]], this ''Marauder'' carries a [[Snub-Nose PPC]] with a [[PPC Capacitor]] and Clan-spec ER Medium Laser in each arm. It carries a Clan-grade [[Ultra AC/10]] with two tons of ammunition in the right torso; Ammunition is protected by CASE II. Fourteen double heat sinks are fitted and a [[Supercharger]] allows the 'Mech to reach a top speed of 86km/h. For protection the 'Mech carries [[Ballistic Reinforced Armor]]. BV (2.0) = 2,509<ref>''Recognition Guide: ilClan, vol. 6'', p. 35</ref>
  
 
==Related BattleMechs==
 
==Related BattleMechs==
* ''[[Bandersnatch]]'' - Designed by [[Felifious Bander]], the ''Bandersnatch'' was designed with a similar profile and weapons layout to the ''Marauder'', and maintains common components to ease repair and allow an excess of spare parts.  The ''Bandersnatch'' mounts an [[LB 10-X AC]] and a pair of [[Medium Laser|Medium Lasers]] in each arm.  The 'Mech also mounts a trio of [[LRM 10|LRM 5s]] and a pair of [[Medium Laser|Medium Lasers]] in the torso.<ref> ''Technical Readout: 3055'', pp. 66-67</ref>   
+
* ''[[Bandersnatch]]'' - Designed by [[Felifious Bander]], the ''Bandersnatch'' was designed with a similar profile and weapons layout to the ''Marauder'', and maintains common components to ease repair and allow an excess of spare parts.  The ''Bandersnatch'' mounts an [[LB 10-X AC]] and a pair of [[Medium Laser]]s in each arm.  The 'Mech also mounts a trio of [[LRM 5]]s and a pair of [[Medium Laser]]s in the torso.<ref> ''Technical Readout: 3055'', pp. 66-67</ref>   
  
 
* ''[[Rakshasa]]'' - Based upon the ''[[Timber Wolf]]'' Clan OmniMech, the basic ''Rakshasa'' is a modified ''Marauder'' with a paired [[ER Large Laser]] and [[Medium Laser]] in each arm, and [[Artemis IV FCS]]-slaved [[LRM 10|LRM 10s]] in the side torsos.  The ''Rakshasa'' also possesses a single [[Medium Pulse Laser]].<ref> ''Technical Readout: 3055'', pp. 72-73 </ref>  
 
* ''[[Rakshasa]]'' - Based upon the ''[[Timber Wolf]]'' Clan OmniMech, the basic ''Rakshasa'' is a modified ''Marauder'' with a paired [[ER Large Laser]] and [[Medium Laser]] in each arm, and [[Artemis IV FCS]]-slaved [[LRM 10|LRM 10s]] in the side torsos.  The ''Rakshasa'' also possesses a single [[Medium Pulse Laser]].<ref> ''Technical Readout: 3055'', pp. 72-73 </ref>  
Line 111: Line 157:
 
* ''[[Marauder IIC]]'' - One of the [['Mech]]s the [[SLDF]] took with them when they left the [[Inner Sphere]] was the venerable ''Marauder''. Their descendants the [[Clan]]s redesigned it into an 85-ton variant that mounts three [[ER PPC]]s, a pair of [[Medium Pulse Lasers]] and four [[ER Small Lasers]].  
 
* ''[[Marauder IIC]]'' - One of the [['Mech]]s the [[SLDF]] took with them when they left the [[Inner Sphere]] was the venerable ''Marauder''. Their descendants the [[Clan]]s redesigned it into an 85-ton variant that mounts three [[ER PPC]]s, a pair of [[Medium Pulse Lasers]] and four [[ER Small Lasers]].  
  
* ''[[Marauder II]]'' - Built by a collaboration between GM and [[Blackwell Heavy Industries]] exclusively for the [[Wolf's Dragoons]] [[mercenary unit]], the ''Marauder II'' mates the abilities of the fearsome ''Marauder'' to a massively strengthened jump capable 100 ton assault 'Mech chassis.
+
* ''[[Marauder II]]'' - Originally built as a collaboration between GM and [[Blackwell Heavy Industries]] exclusively for the [[Wolf's Dragoons]] [[mercenary unit]], the ''Marauder II'' mates the abilities of the fearsome ''Marauder'' to a massively strengthened jump capable 100 ton assault 'Mech chassis.
  
 
* ''[[Timber Wolf]]'' - When [[Operation Revival]] first started, the then-unknown invaders used 'Mechs not recognized by targeting systems. One such instance involved a confused targeting system identifying a ''Timber Wolf'' as either a MAD-series ''Marauder'' or CAT-series ''Catapult'', due to physical similarities to both. After-action analysis of the data recording resulted in the ''Timber Wolf'' being dubbed with the operational name "Mad Cat" by Inner Sphere forces.
 
* ''[[Timber Wolf]]'' - When [[Operation Revival]] first started, the then-unknown invaders used 'Mechs not recognized by targeting systems. One such instance involved a confused targeting system identifying a ''Timber Wolf'' as either a MAD-series ''Marauder'' or CAT-series ''Catapult'', due to physical similarities to both. After-action analysis of the data recording resulted in the ''Timber Wolf'' being dubbed with the operational name "Mad Cat" by Inner Sphere forces.
  
 
==Notable Pilots==
 
==Notable Pilots==
* [[Grayson Carlyle]] piloted Valdis Kevlavic's  ''Marauder'' he appropriated during the 'Battle of the University' which concluded the Verthandi campaign, handing his ''[[Shadow Hawk]]'' off to his XO, [[Lori Kalmar]]. [[Grayson Carlyle]] fielded the ''Marauder'' again on [[Helm]] in the [[Gray Death Legion]]'s Helm campaign in 3027, He continued piloting this 'Mech until he lost it against the Clans on [[Sudeten]].  Grayson would upgrade to a ''[[Victor]]'' later in his career. 
+
:''See [[:Category:Notable Marauder pilots]]''
 
 
* [[First Prince]] [[Joseph Davion]] of the Federated Suns piloted a ''Marauder'' up until his death during the [[War of Davion Succession]].<ref name="H:LoTV1p18">''Historical: Liberation of Terra Volume 1'', p. 18, "A Plague On Both Your Houses: The War of Davion Succession (Second Hidden War)"</ref>
 
 
 
* The [[Bounty Hunter]] famously captured [[Natasha Kerensky]]'s ''Marauder'', starting a famous enmity between the two elite MechWarriors. It would become the Bounty Hunter's signature 'Mech during the [[Succession Wars (History)|Succession Wars]] and well into the [[Clan Invasion]], until he eventually replaced it with a ''[[Timber Wolf]]''.
 
 
 
*"Black" [[Kevin Langstrom]] retrieved and piloted the [[Black Marauder]]; [[canon rumor|rumors]] raised questions as to who was piloting whom with the pair as the tales portray the 'Mech as possessed, or an evil demonic entity.
 
  
 
== Design Quirks ==
 
== Design Quirks ==
The ''Marauder'' has the following [[Design Quirks]]:<ref>[[BattleMech Manual]], p. 93 Design Quirk Table - Marauder Entry.</ref>
+
The ''Marauder'' has the following [[Design Quirks]]:<ref>''BattleMech Manual'', p. 93 Design Quirk Table - Marauder Entry.</ref>
 
* [[Command BattleMech]]
 
* [[Command BattleMech]]
 
* [[Directional Torso Mount|Directional Torso Mount (RT)]]
 
* [[Directional Torso Mount|Directional Torso Mount (RT)]]
Line 132: Line 172:
 
* [[Exposed Weapon Linkage|Exposed Weapon Linkage (AC/5)]]
 
* [[Exposed Weapon Linkage|Exposed Weapon Linkage (AC/5)]]
  
The ''MAD-4X Marauder'' variant is subject to the following [[Design Quirks]]:<ref name=XTRO:SWp7/>
+
The MAD-4X ''Marauder'' variant is subject to the following [[Design Quirks]]:<ref name=XTRO:SWp7/>
 
* [[Combat  Computer]]
 
* [[Combat  Computer]]
 
* [[Cramped  Cockpit]]  
 
* [[Cramped  Cockpit]]  
Line 145: Line 185:
 
==Gallery==
 
==Gallery==
 
<gallery>
 
<gallery>
Image:3025_marauder.jpg|Original [[Unseen]] MAD-3R ''Marauder'' from ''[[Technical Readout: 3025|TRO:3025]]''
+
3025_marauder.jpg|Original [[Unseen]] MAD-3R ''Marauder'' from ''[[Technical Readout: 3025|TRO:3025]]''
Image:MAD-5D.png|Unseen MAD-5D ''Marauder'' from ''[[Technical Readout: 3050|TRO:3050]]''
+
MAD-5D.png|Unseen MAD-5D ''Marauder'' from ''[[Technical Readout: 3050|TRO:3050]]''
Image:Mad-5l marauder.jpg|MAD-5L ''Marauder'' from ''[[Technical Readout: Project Phoenix|TRO:Phoenix]]''
+
3025-Marauder-Classics.png|''Marauder'' from ''[[Recognition Guide: ilClan, vol. 6|RG:ilClan v6]]''
Image:Mad-5r marauder.png|MAD-5R ''Marauder'' from ''TRO:Phoenix''
+
Mad-5l marauder.jpg|MAD-5L ''Marauder'' from ''[[Technical Readout: Project Phoenix|TRO:Phoenix]]''
Image:Mad-5t marauder.png|MAD-5T ''Marauder'' from ''TRO:Phoenix''
+
Mad-5r marauder.png|MAD-5R ''Marauder'' from ''TRO:Phoenix''
Image:Mad-7d marauder.png|MAD-7D ''Marauder'' from ''TRO:Phoenix''
+
Mad-5t marauder.png|MAD-5T ''Marauder'' from ''TRO:Phoenix''
Image:Mad-9s marauder.png|MAD-9S ''Marauder'' from ''TRO:Phoenix''
+
Mad-7d marauder.png|MAD-7D ''Marauder'' from ''TRO:Phoenix''
Image:Mad-9m marauder.png|MAD-9M ''Marauder'' from ''TRO:Phoenix''
+
Mad-9s marauder.png|MAD-9S ''Marauder'' from ''TRO:Phoenix''
Image:Mad-9W2 Marauder.png |MAD-9W2 ''Marauder'' from ''[[Technical Readout: 3085|TRO:3085]]''
+
Mad-9m marauder.png|MAD-9M ''Marauder'' from ''TRO:Phoenix''
Image:Marauder_MAD-4X_XTROSW1.jpg|Prototype MAD-4X ''Marauder'' from ''[[Experimental Technical Readout: Succession Wars, Volume 1|XTRO:SW Vol. 1]]''
+
Mad-9W2 Marauder.png |MAD-9W2 ''Marauder'' from ''[[Technical Readout: 3085|TRO:3085]]''
Image:Marauder Schematic.jpg|Schematics of ''Marauder'' from ''[[BattleForce]]'' rulebook
+
Marauder_MAD-4X_XTROSW1.jpg|Prototype MAD-4X ''Marauder'' from ''[[Experimental Technical Readout: Succession Wars, Volume 1|XTRO:SW Vol. 1]]''
Image:MWO Marauder.png|Model of ''Marauder'' from ''[[MechWarrior Online|MWO]]''
+
Omnimarauder.png|MAD-BR-O ''OmniMarauder'' from ''[[Experimental Technical Readout: Caveat Emptor|XTRO:Caveat Emptor]]''
 +
Marauder Schematic.jpg|Schematics of ''Marauder'' from ''[[BattleForce]]'' rulebook
 +
Camoliaochestertonreserves.png|''Marauder'' in colors of [[Chesterton Reserves]] from ''[[Camo Specs]]''
 +
MWO Marauder.png|Model of ''Marauder'' from ''[[MechWarrior Online|MWO]]''
 +
Marauder_MW1stE.PNG|''Marauder'' from ''[[MechWarrior: The BattleTech Role Playing Game]]''
 
</gallery>
 
</gallery>
  
Line 164: Line 208:
 
==Bibliography==
 
==Bibliography==
 
* ''[[BattleMech Manual]]''
 
* ''[[BattleMech Manual]]''
 +
*''[[BattleTech: Battle of Tukayyid]]''
 
* ''[[Combat Operations]]''
 
* ''[[Combat Operations]]''
 
* ''[[Decision at Thunder Rift]]''
 
* ''[[Decision at Thunder Rift]]''
 +
* ''[[Experimental Technical Readout: Caveat Emptor]]''
 
* ''[[Experimental Technical Readout: Succession Wars, Volume 1]]''
 
* ''[[Experimental Technical Readout: Succession Wars, Volume 1]]''
 
* ''[[Historical: Liberation of Terra Volume 1]]''
 
* ''[[Historical: Liberation of Terra Volume 1]]''
Line 174: Line 220:
 
* ''[[Operational Turning Points: Fronc Reaches]]''
 
* ''[[Operational Turning Points: Fronc Reaches]]''
 
* ''[[The Price of Glory]]''
 
* ''[[The Price of Glory]]''
 +
* ''[[Recognition Guide: ilClan, vol. 6]]''
 
* ''[[Record Sheets: 3025/3026]]''
 
* ''[[Record Sheets: 3025/3026]]''
 
* ''[[Record Sheets: 3039 Unabridged]]''
 
* ''[[Record Sheets: 3039 Unabridged]]''
Line 193: Line 240:
 
* ''[[Technical Readout: Project Phoenix]]''
 
* ''[[Technical Readout: Project Phoenix]]''
 
* ''[[Total Warfare Style Record Sheets: Phoenix Upgrades]]''
 
* ''[[Total Warfare Style Record Sheets: Phoenix Upgrades]]''
 +
* ''[[Objectives: Periphery]]''
 +
* ''[[Objectives: Capellan Confederation]]''
 +
* ''[[Objectives: Draconis Combine]]''
 +
* ''[[Objectives: Lyran Alliance]]''
  
 
[[Category:Federated Suns BattleMechs]]
 
[[Category:Federated Suns BattleMechs]]
Line 202: Line 253:
 
[[Category:Improved C3 Equipped BattleMechs]]
 
[[Category:Improved C3 Equipped BattleMechs]]
 
[[Category:German renamed units]]
 
[[Category:German renamed units]]
 +
[[Category:Draconis Combine BattleMechs]]

Revision as of 14:28, 12 July 2021

This article is about the iconic BattleMech. For other uses, see Marauder (disambiguation).
Marauder
Marauder
Production information
Manufacturer General Motors[1]

Bowie Industries[2]


Ceres Metal Industries[3]


Gibson Federated BattleMechs


Ibuki Robotics & Manufacturing[4]


Independence Weaponry


Majesty Metals and Manufacturing[5]


Ronin Incorporated


Taurus Territorial Industries


Vandenberg Mechanized Industries [6]


Pinard Protectorates Limited [7]


Production Year 2819[8]
Model MAD-3R
Class Heavy
Cost 6,635,125 C-bills
Technical specifications
'Mech type Inner Sphere BattleMech
Mass 75 tons
Chassis GM Marauder
Armor Valiant Lamellor
Engine Vlar 300
Communications System Dalban Micronics
Targeting Tracking System Dalban HiRez
Heat Sinks 16
Speed 64.8 km/h
Armament
BV (1.0) 1,089[9]
BV (2.0) 1,363[10][11]


Description

The Marauder was first built by General Motors in 2612 for use as an attack and direct fire support BattleMech. The Marauder was one of the most well-known 'Mechs in existence and originally meant to usher in a new generation of 'Mechs. Unfortunately, with the fall of the Star League, this new generation never quite materialized. On its own merits though, the Marauder was a devastatingly powerful 'Mech, outclassed only by larger machines like the Stalker and BattleMaster.[12][13]


During the years of the Star League the Marauder was a favorite in the Gunslinger Program thanks to its tremendous firepower, while its advanced electronics endeared it to many battalion and regimental commanders. On the hellish battlefields of the Succession Wars, massed formations of Marauders proved devastating as shock units in breaking through enemy lines. However, the rarity of these 'Mechs (House Liao only fielded several hundred Marauders total in 2828) often meant they had to be paired with other, similar 'Mechs such as the Warhammer and Thunderbolt.[12][13]

When the Helm Memory Core was recovered, the Marauder was an obvious candidate for lostech upgrades. House Davion were among the first to field an updated variant, but their eagerness backfired when House Kurita captured Quentin - and its Marauder factory - in the War of 3039. With the Kuritans in possession of this first variant, the Federated Commonwealth decided to build a second using a different configuration. Other lostech-inspired variants were also built in time for the Clan Invasion.[14]

A second revitalization of the Marauder occurred at the hands of the Capellan Confederation, though notably they had never before built the 'Mech themselves. On behalf of Ceres Metals Industries, the Chancellor himself, Sun-Tzu Liao, negotiated a deal to acquire the design from General Motors in exchange for allowing HildCo Interplanetary to resume exporting its products to the Federated Suns. While a success, disturbing rumors from the Periphery reported a number of these seemingly backwater realms fielding updated Marauders of their own, with origins suspected to be of a sinister nature.[15]

Weapons and Equipment

Standing at twelve meters tall,[16] the Marauder carried a payload dedicated to long-range firepower in the form of two Magna Hellstar PPCs and a General Motors Whirlwind Autocannon/5. These three weapons all had similar range profiles that allowed the Marauder use them to their maximum effect at long ranges. The PPCs were carried in armored gauntlets, matching the same configuration as the Warhammer, but the arms' versatile ball-and-socket joints provided a faster traverse rate and superior field of fire. Compact enough to be carried in the arms, the Hellstar PPCs were also durable enough to withstand heavy hand-to-hand combat, allowing the Marauder to bludgeon opponents into scrap. Firing a three-round burst of 120mm shells,[17] the autocannon was mounted atop the right torso and fed by one ton of ammunition stored in the left torso. Added as an afterthought, its connection to the main chassis was tenuous and a successful hit could easily disable the system, while the gun itself was often temperamental. If the enemy was able to close the range, the Marauder could rely on its two Magna Mk II Medium Lasers, also mounted in the gauntlets, which provided adequate defense against other 'Mechs.[12][13]

The once-unique silhouette of the Marauder made it much harder to target than the more common humanoid models. It also originally carried eleven and a half tons of special Valiant Lamellor armor which was less massive and superior at distributing kinetic and thermal energy than other standard armor types. As the knowledge for its manufacture was lost though, many Marauders became a patchwork quilt as sections were damaged and had to be replaced. Sixteen heat sinks easily allowed a competent MechWarrior to keep their waste heat under control, while a powerful nineteen-ton fusion engine gave it a decent cruising speed of 43.2 km/h.[12][13]

The Marauder was not without its flaws, potent though it was. In addition to the weak linkage between its autocannon and chassis, the rotation rings connecting the chassis with the leg assemblies was a similar weak point in the design. Many Marauder pilots took to mounting improvised armoring around these points in an attempt to protect these vulnerabilities. The powerful HiRez tracking system, located in the forward section of the 'Mech, was also known for impeding the pilot's field of view.[12]

Variants

  • MAD-3D 
    The 3D Marauder was a modification of the 'Mech introduced for House Davion in 2834 which removed its ammunition dependency. In order to do this, the 3D replaced the Autocannon/5 with a Large Laser. The saved weight was used to add four more heat sinks to the 'Mech to handle the added heat burden from the large laser.[12][25] BV (1.0) = 1,136,[26] BV (2.0) = 1,470[27][28]
  • MAD-3L 
    Built for House Liao in 2905, the 3L attempted to make the Marauder more heat efficient (and make up for a shortage in reliable PPCs) by replacing one of the arm-mounted particle cannons with a large laser. Additionally, two more heat sinks were added to further increase the Marauder's heat efficiency.[12][29] BV (1.0) = 1,098,[30] BV (2.0) = 1,369[27][31]
  • MAD-3M 
    The 3M was introduced in 2873 specially for the Free Worlds League. Because of the abundance of large lasers built by that realm, the 3M model carried two large lasers in place of the PPCs. While running cooler than the weapons they replaced, the large lasers also caused slightly less damage. Additionally, the 3M added four heat sinks to the design, making the 'Mech much more manageable for pilots who have trouble with overheating their 'Mechs.[12][32] BV (1.0) = 1,105,[33] BV (2.0) = 1,335[27][34]
  • MAD-3R (C) 
    A Clan-tech retrofit of the classic MAD-3R Marauder, designed for use by second-line garrison and solahma forces, the Marauder C replaced some of the Inner Spheroid weaponry with Clan equivalents. The Marauder C swapped the PPCs for a pair of Clan-tech Large Pulse Lasers and the standard autocannon for a Ultra AC/5 model, but retained the IS medium lasers. The munitions for the autocannon were also protected with CASE.[35] BV (2.0) = 1,616[36]
  • MAD-4X 
    This experimental variant was made at Ronin Incorporated's facility on Wallis in 3039. Techs removed the standard weaponry from a Marauder and replaced the arm mounted weapons with a Binary Laser Cannon in each arm, while the torso mounted autocannon was replaced by twin SRM-6 launchers backed by one ton of ammunition for each launcher. The Marauder-4X was also noteworthy because it used a Prototype Endo Steel chassis. To keep the heat under control, technicians installed twelve single heat sinks and six prototype Double Heat Sinks.[37]
  • MAD-5CS 
    Developed by ComStar for the Battle of Tukayyid, this Marauder variant has an ER PPC and Medium Pulse Laser in each arm. The class 5 autocannon is replaced by an LB 10-X autocannon with two tons of ammunition. To make room for the new weapons and the eighteen double heat sinks, ComStar techs installed a 300 XL Engine. BV (2.0) = 1,648[38]
  • MAD-5D 
    The 5D Marauder was the first updated variant to be designed in the wake of the Helm Memory Core recovery, coming off the factory lines in 3051. A direct upgrade of the 3D model, the 5D's engine was replaced with a General Motors 300 XL Engine, retaining the same speed profile at a much-reduced weight, to allow the entire weapons payload to be stripped out and upgraded. The 5D's primary weapons were two Defiance 1001 ER PPCs, carried in either arm, supported by a Sutel Precision Line Large Pulse Laser in place of the autocannon. The medium lasers were replaced with two Sutel Precision Line Medium Pulse Lasers, while a Federated SuperStreak Streak SRM-2 launcher was also added to the left torso, along with one ton of CASE-protected ammo, for more close-range firepower. The model was protected by fourteen tons of armor, mostly added to the legs and side torsos, and carried sixteen double heat sinks for heat management. It also had a jumping capability of up to 120 meters thanks to four jump jets mounted in its legs. When the Kuritans captured Quentin, Independence Weaponry began building the 5D to augment their forces; unwilling to completely let go of the design, General Motors also built the 5D for FedCom forces out of Kathil.[14][39] BV (1.0) = 1,504,[26] BV (2.0) = 1,787[40]
  • MAD-5D-DC 
    The 5D-DC strips out the Streak launcher, ammunition, CASE, and one heat sink from a Marauder-5D to make room for a Command Console.[23] BV (2.0) = 1,787[41]
  • MAD-5L 
    The 5L variant of the 'Mech was the first natively-produced Marauder variant for the Capellan Confederation. Introduced in early July 3067 and built from the Ceres Metals factories on Warlock and Capella, the 5L removed the entire weapons payload of the original and upgraded its weapons, armor, and heat sinks. Built on a Ceres Metals Lite chassis with a Rawlings 300 fusion engine, the 'Mech was armored with fourteen tons of Ceres Heavy Stealth Armor backed up by a Guardian ECM Suite. The 'Mech carried two Martell ER Large Lasers and two Ceres Arms ER Medium Lasers in its arms and, in place of the autocannon, a Ceres Arms Warrior ER PPC. The heat from the 5L's all-energy arsenal was handled by eighteen double heat sinks. Additionally, the 5L was built using Triple Strength Myomer, allowing the 'Mech to run at speeds of up to 86 km/h when it was operating in its optimum heat range. The electronics were also replaced with a Ceres Metals Model 666 comms system and Ceres Bullseye tracking system. [42][43] BV (1.0) = 1,614,[30] BV (2.0) = 2,286[44]
  • MAD-5M 
    The 5M variant of the Marauder was introduced in 3051 by Ronin Inc. and Free Worlds Defense Industries for the Free Worlds League. Compared to the original it replaced the standard fusion engine with an XL Engine and completely re-armed the 'Mech with recovered Star League-era weapons. The primary weapons were two Tronel PPL-20 Large Pulse Lasers, backed up by two Magna 400P Medium Pulse Lasers, in either arm. Finally, in place of the Autocannon/5, the 5M carried a Oriente Model O LB-X Autocannon/10. The 5M had a jumping distance of up to one hundred and twenty meters thanks to four jump jets mounted in the legs and carried sixteen double heat sinks. One ton of ammunition for the LB-X was carried in the left torso and protected by CASE.[14][45] BV (1.0) = 1,391,[33] BV (2.0) = 1,471[46]
  • MAD-5R 
    The Marauder 5R was an upgrade of the 3R model introduced in 3068. The 'Mech carried an XL engine to save weight and its heat sinks upgraded to double-strength models. The PPCs were replaced with two ER PPCs and the Autocannon/5 upgraded to a Rotary Autocannon/5; the two medium lasers of the original were retained. Also, for added protection, the 5R mounted fourteen tons of armor and a Guardian ECM Suite. The 'Mech also carries a C3 Slave unit that allows the 'Mech to transmit targeting data to its lance mates.[47] BV (1.0) = 1,548 (C3: 279),[26] BV (2.0) = 1,877[48]
  • MAD-5S 
    The 5S variant of the Marauder dates to the Clan Invasion, introduced in 3051 by Bowie Industries after the Draconis Combine captured plans for the 5D design. The variant was built around an XL engine to save weight and upgraded the heat sinks to double-strength models. Like the 5D, the 5S carried ER PPCs and medium pulse lasers, but replaced the autocannon with a Poland Main Model A Gauss Rifle. One ton of ammunition for this powerful, long-ranged weapon was carried in the left torso.[49] BV (1.0) = 1,466,[26][50] BV (2.0) = 1,799[51]
  • MAD-5T 
    The 5T variant of the Marauder featured elements of both the 5M and the 5R models when it was introduced in 3068. The 5T was built around an Endo Steel chassis and an XL engine to save weight. The 'Mech carries, as its primary weapons, two large pulse lasers, backed up by two medium pulse lasers and a Rotary Autocannon/5 in the torso mount. The weapons are all linked to an advanced Targeting Computer, making the 5T incredibly accurate. Finally, the 5T is protected by fourteen tons of armor.[52] BV (1.0) = 1,390,[26] BV (2.0) = 1,750[53]
  • MAD-6L 
    An upgrade of the 5L introduced in 3070, the 6L replaced the lasers with a pair of Ceres Arms Crusher Plasma Rifles. The particle cannon was also downgraded to a standard Hellstar PPC. The Stealth Armor and attendant Guardian ECM Suite and Triple Strength Myomers were retained, though three less double heat sinks were used.[54][55][56] BV (2.0) = 2,322[57]
  • MAD-7D 
    Another Davion upgrade of the Marauder, the 7D was built in 3068 with an XL engine to save weight. The 'Mech was armed with two ER large lasers and two ER medium lasers, as well as a Rotary Autocannon/5. These were all linked to a Targeting Computer, making the 7D extremely accurate. The 'Mech also carried an ECM Suite for protection against electronic warfare equipment and was armored with fourteen tons of armor.[59] BV (1.0) = 1,582,[26] BV (2.0) = 1,986[60]
  • MAD-7M 
    Developed in the Free Worlds League during the Jihad, this derivative of the -5M carries a Heavy PPC and ER Medium Laser in each arm. The dorsal cannon is reduced to an LB 5-X with a ton of ammunition protected by CASE. It has fifteen double heat sinks and retains the 120 meter jump radius of the -5M.[23] BV (2.0) = 1,908[61]
  • MAD-7R 
    This Marauder variant is nearly identical to the MAD-7C in that it carries an ER PPC and Medium X-Pulse Laser in each arm. The torso cannon is a Light Gauss Rifle protected by CASE II. It retains the Guardian ECM Suite but the C3 slave module has been replaced by an additional ton of Light Gauss Rifle ammunition, providing thirty-two shots. BV (2.0) = 1,832[62]
  • MAD-7S 
    Like the -7C this Lyran Commonwealth version has an ER PPC and Medium X-Pulse Laser in each arm. The torso cannon is a Gauss Rifle protected by CASE II. Two tons of Gauss Rifle ammo are carried. BV (2.0) = 1,903[63]
  • MAD-9M 
    A departure from the standard Marauder design philosophy, the 3068 9M is built using an XL engine and twelve and a half tons of Valiant Chainmail Ferro-Fibrous armor. The 'Mech carries, as its primary weapons, four ER Large Lasers for long-range combat. In the event that the 'Mech closes, it has two Guided Technologies 2nd Generation Streak SRM-6 launchers. The 9M also carries TAG to designate targets for Arrow IV artillery strikes and an ECM Suite for protection against electronic warfare systems.[65] BV (1.0) = 1,383,[33] BV (2.0) = 1,704[66]
  • MAD-9S 
    The 9S Marauder is built in 3068 with a Light Fusion Engine and an Endo Steel chassis to save weight. The 9S also used double heat sinks to handle its heat intensive weapons payload. The 9S carried two ER PPCs as its primary weapons as well as an LB-X Autocannon/10 for long-range combat. For close ranges, the 9S was equipped with two ER medium lasers and a Flamer. The 9S was also equipped with exceptional electronic systems including an ECM Suite and a Beagle Active Probe.[70] BV (1.0) = 1,403,[50] BV (2.0) = 1,786[71]
  • MAD-11D 
    Produced by the Federated Suns, this Marauder uses an Endo-Composite skeleton, XL Gyro, and XL engine to free weight. A Clan-spec ER PPC is in each arm, supported by a Medium X-Pulse Laser. A Silver Bullet Gauss Rifle with two tons of ammunition is protected by CASE II. Seventeen double heat sinks keep the weapon heat under control. BV (2.0) = 2,263[74]
  • MAD-BR-O OmniMarauder 
    The theoretical outcome of a 3135 "Future Marauder Feasibility Study" for GM by Luke Schteele, on-loan from Bander BattleMechs, the OmniMarauder is a cutting edge Clan-tech rebuild and conversion of the iconic design as a OmniMech. Protected by sixteen and half tons of Ferro-Lamellor armor and built around a Clan-grade Endo Steel frame, a Clan 300 XL Engine, Inner Sphere Compact Gyro and twelve Clan Double Heat Sinks allow the MAD-BR-O to retain thirty-five and half tons of pod space. Two Configurations were suggested by Schteele and while certainly more lethal than any Marauder to date, the result is also prohibitively expensive and unlikely to ever see production.[75]
  • Prime - A modern take on the MAD-3R layout, the OmniMarauder Prime carries a Clan ER PPC and ER Medium in each arm in support of a HAG 30 in the right torso. With the mammoth HAG protected by CASE II, three tons of HAG munitions and four extra double heat sinks keep the Prime in the think of the fighting. BV (2.0) = 2,836[75]
  • Alternate Configuration A - The OmniMarauder A is built around Inner Sphere weapons as yet unsurpassed by the Clans, carrying a Plasma Rifle and a ton of reloads in each arm supported by as mammoth Heavy Gauss Rifle split between the right and center torsos, fed from two tons of HGR rounds. Clan-grade CASE II in the right and center torsos to shield the pilot against the massive cannon exploding and a Clan Light TAG round out the design. BV (2.0) = 2,127[75]
  • Dual Cockpit refits: The Marauder was one of the Free Worlds League's preferred 'Mechs to install Dual Cockpits. Standard refits usually install the Dual Cockpit on a MAD-3M or MAD-5D, removing one heat sink.

Custom Variants

  • MAD-SD Marauder Douglas 
    The personal 'Mech of 12th Vegan Rangers Alpha Regiment commander Margrave Sheridan Douglass during the DCMS's Third Succession War invasion of Galtor III, only the arm mounted medium lasers remain, with each PPC replaced by a large laser and the autocannon swapped for a pair of SRM-4 launchers with a shared ton of reloads. The remaining weight and space was devoted to five additional heat sinks and three extra tons of armor. BV (2.0) = 1,459[76]
  • MAD-7D Marauder Von Staskov 
    The personal 'Mech of Calderon's Commando commander Marshal Vrabel von Staskov circa 3088, an ER PPC and Medium Laser are mounted in each arm, supported by a center torso mounted Light AC/5 fed from a single ton of reloads. Built around a 300 rated Light Fusion Engine and clad in Light Ferro-Fibrous armor, von Staskov's 'Mech is fitted with Double Heat Sinks, Jump Jets and Triple Strength Myomer.[77]
  • Bounty Hunter model (3015) 
    This unusual variant piloted by the Bounty Hunter featured various lostech equipment: the standard 300 Vlar fusion engine was downgrade to a 225-rated version giving it a top speed of 54 kph. It mounted a standard PPC and a Medium Laser in each arm while another PPC and medium laser were mounted on the right torso; additional medium lasers were mounted in the center and left torso. Sixteen double heat sinks were use to cool this beast down, allowing it to firing all 3 PPCs without even generating excess heat. It featured fourteen and a half tons of standard armor, giving it maximum armor for its weight, and was capable of jumping over 90 meters with three jump jets. It was also painted all green with credit symbols. BV (1.0) = 1,686 BV (2.0) = 1,919[78]
  • Bounty Hunter model (3044) 
    The Bounty Hunter upgraded his Marauder sometime in 3044. The fusion engine was upgraded to an extra-light version while keeping it at the same rating to save weight, though the increased size meant three heat sinks had to be removed. The standard PPCs were upgraded to ER PPCs, both the left and right torso-mounted medium lasers were removed while the center torso medium laser was moved to the head to make room for a Gauss Rifle on the right torso and two tons of ammunition. This upgrade allowed the Bounty Hunter to engage enemies at a far greater range while still able to continuously operate without fear of overheating. BV (1.0) = 1,788 BV (2.0) = 2,103[79]
  • Bounty Hunter model (3138) 
    Sometime after 3044, the Bounty Hunter was able to source Clan equipment. Each of the Marauder's arms carries a Clan-grade ER PPC supported by a Medium Laser. The Gauss Rifle has also been replaced by a Clan-grade model with one ton of ammunition. Four jump jets remain installed and fifteen double heat sinks have been installed. BV (2.0) = 2,708[80]
  • Red Hunter (3146) 
    Piloted by a descendant of Hassid Ricol, this Marauder carries a Snub-Nose PPC with a PPC Capacitor and Clan-spec ER Medium Laser in each arm. It carries a Clan-grade Ultra AC/10 with two tons of ammunition in the right torso; Ammunition is protected by CASE II. Fourteen double heat sinks are fitted and a Supercharger allows the 'Mech to reach a top speed of 86km/h. For protection the 'Mech carries Ballistic Reinforced Armor. BV (2.0) = 2,509[81]

Related BattleMechs

  • Bandersnatch - Designed by Felifious Bander, the Bandersnatch was designed with a similar profile and weapons layout to the Marauder, and maintains common components to ease repair and allow an excess of spare parts. The Bandersnatch mounts an LB 10-X AC and a pair of Medium Lasers in each arm. The 'Mech also mounts a trio of LRM 5s and a pair of Medium Lasers in the torso.[82]
  • Dragon Fire - The Dragon Fire is among a series of Star League-era Marauder-series BattleMechs. However, the Dragon Fire never reached full-scale production due to the Amaris Civil War. The Dragon Fire replaces the energy-weapon heavy Marauder armament with an LB 10-X AC, a Gauss Rifle, and an assortment of torso-mounted lasers.[84]
  • Maelstrom - The Maelstrom is among a series of Star League-era Marauder-series BattleMechs. The Amaris Civil War curtailed the production of the Maelstrom, making the BattleMech rare until plans were rediscovered with the Gray Death Memory Core. The Maelstrom maintains a heavy array of energy weapons, highlighted by an ER PPC and an ER Large Laser. The Maelstrom also mounts TAG.[85]
  • Timber Wolf - When Operation Revival first started, the then-unknown invaders used 'Mechs not recognized by targeting systems. One such instance involved a confused targeting system identifying a Timber Wolf as either a MAD-series Marauder or CAT-series Catapult, due to physical similarities to both. After-action analysis of the data recording resulted in the Timber Wolf being dubbed with the operational name "Mad Cat" by Inner Sphere forces.

Notable Pilots

See Category:Notable Marauder pilots

Design Quirks

The Marauder has the following Design Quirks:[87]

The MAD-4X Marauder variant is subject to the following Design Quirks:[37]

Notes

  • The Marauder BattleMech is one of the most iconic early BattleMechs featured in BattleTech (and previously Battledroids). Marauder miniatures have been resculpted several times, more recently due to legal disputes. The original Marauder artwork and figures are unseen, bearing striking resemblance to Zentradi Officer's Battle Pods (Roiquonmi Glaug Battle Pod) from the anime series The Super Dimension Fortress Macross from which they derived. "Reseen" Marauder images have replaced previous artwork, and aspects of the design have influenced artwork and construction for several other BattleMechs.
  • In German products the unit's proper name was perfectly translated to Marodeur. The model code was accordingly changed to MAR-3D.

Gallery

References

  1. Handbook House Davion p.187
  2. Objectives: Lyran Alliance p.7
  3. Objectives: Capellan Confederation p.24
  4. Objectives: Draconis Combine p.30
  5. Objectives: Periphery p.16
  6. Objectives: Periphery p.7
  7. Objectives: Periphery p.9
  8. MUL online date for Marauder
  9. Combat Operations, p. 121
  10. Technical Readout: 3039, p. 298
  11. Record Sheets: 3039 Unabridged, p. 493
  12. 12.0 12.1 12.2 12.3 12.4 12.5 12.6 12.7 Technical Readout: 3025, p. 98
  13. 13.0 13.1 13.2 13.3 Technical Readout: 3039, p. 298
  14. 14.0 14.1 14.2 Technical Readout: 3050, p. 174
  15. Technical Readout: Project Phoenix, p. 48
  16. Decision at Thunder Rift, Ch. 9
  17. Decision at Thunder Rift, Ch. 3
  18. 18.0 18.1 Technical Readout: 3075, p. 169
  19. Record Sheets: 3075 Unabridged, p. 178
  20. Record Sheets: 3075 Unabridged - Age of War, p. 28
  21. Record Sheets: 3075 Unabridged, p. 179
  22. Record Sheets: 3075 Unabridged - Age of War, p. 29
  23. 23.0 23.1 23.2 Recognition Guide: ilClan, vol. 6, p. 6
  24. Recognition Guide: ilClan, vol. 6, p. 21
  25. Record Sheets: Phoenix Upgrades, p. 202
  26. 26.0 26.1 26.2 26.3 26.4 26.5 Combat Operations, p. 127
  27. 27.0 27.1 27.2 Master Unit List: Battle Values, p. 125
  28. Record Sheets: 3039 Unabridged, p. 490
  29. Record Sheets: Phoenix Upgrades, p. 203
  30. 30.0 30.1 Combat Operations, p. 122
  31. Record Sheets: 3039 Unabridged, p. 491
  32. Record Sheets: Phoenix Upgrades, p. 204
  33. 33.0 33.1 33.2 Combat Operations, p. 130
  34. Record Sheets: 3039 Unabridged, p. 492
  35. The Battle for Twycross, p. 48
  36. Record Sheets: 3085 Unabridged — Project Phoenix, p. 191
  37. 37.0 37.1 Experimental Technical Readout: Succession Wars, Volume 1, p. 7
  38. BattleTech: Battle of Tukayyid, pp. 172-173
  39. Record Sheets: Phoenix Upgrades, p. 206
  40. Record Sheets: 3085 Unabridged — Project Phoenix, p. 176
  41. Recognition Guide: ilClan, vol. 6, p. 23
  42. Record Sheets: Phoenix Upgrades, p. 207
  43. Technical Readout: Project Phoenix, p. 37
  44. Record Sheets: 3085 Unabridged — Project Phoenix, p. 177
  45. Record Sheets: Phoenix Upgrades, p. 208
  46. Record Sheets: 3085 Unabridged — Project Phoenix, p. 178
  47. Record Sheets: Phoenix Upgrades, p. 209
  48. Record Sheets: 3085 Unabridged — Project Phoenix, p. 179
  49. Record Sheets: Phoenix Upgrades, p. 210
  50. 50.0 50.1 Combat Operations, p. 132
  51. Record Sheets: 3085 Unabridged — Project Phoenix, p. 180
  52. Record Sheets: Phoenix Upgrades, p. 211
  53. Record Sheets: 3085 Unabridged — Project Phoenix, p. 181
  54. Record Sheets: Phoenix Upgrades, p. 212
  55. 55.0 55.1 "New Death from IrTech"
  56. Technical Readout: 3085, p. 261
  57. Record Sheets: 3085 Unabridged — Project Phoenix, p. 182
  58. Recognition Guide: ilClan, vol. 6, p. 26
  59. Record Sheets: Phoenix Upgrades, p. 213
  60. Record Sheets: 3085 Unabridged — Project Phoenix, p. 183
  61. Recognition Guide: ilClan, vol. 6, p. 27
  62. Recognition Guide: ilClan, vol. 6, p. 28
  63. Recognition Guide: ilClan, vol. 6, p. 29
  64. Record Sheets: 3145 New Tech, New Upgrades, p. 159
  65. Record Sheets: Phoenix Upgrades, p. 214
  66. Record Sheets: 3085 Unabridged — Project Phoenix, p. 184
  67. Record Sheets: Phoenix Upgrades, p. 215
  68. Technical Readout: 3085, p. 260
  69. Record Sheets: 3085 Unabridged — Project Phoenix, p. 185
  70. Record Sheets: Phoenix Upgrades, p. 216
  71. Record Sheets: 3085 Unabridged — Project Phoenix, p. 186
  72. Record Sheets: 3085 Unabridged — Project Phoenix, p. 187
  73. Technical Readout: 3085, p. 261
  74. Recognition Guide: ilClan, vol. 6, p. 30
  75. 75.0 75.1 75.2 Experimental Technical Readout: Caveat Emptor, pp. 16-17 "MAD-BR-O : OmniMarauder"
  76. Historical Turning Points: Galtor, p. 21
  77. Operation Turning Points: Fronc Reaches, p. 39 "Marauder MAD-7D (Von Staskov)"
  78. Record Sheets: 3085 Unabridged — Project Phoenix, p. 189
  79. Record Sheets: 3085 Unabridged — Project Phoenix, p. 190
  80. Recognition Guide: ilClan, vol. 6, p. 34
  81. Recognition Guide: ilClan, vol. 6, p. 35
  82. Technical Readout: 3055, pp. 66-67
  83. Technical Readout: 3055, pp. 72-73
  84. Technical Readout: 3058, pp. 128-129
  85. Technical Readout: 3058, pp. 130-132
  86. Technical Readout: 3058, pp. 144-145
  87. BattleMech Manual, p. 93 Design Quirk Table - Marauder Entry.

Bibliography