Stooping Hawk

Stooping Hawk
Production information
Manufacturer	York OmniMech Y1 Facility
Production Year	2970
Model	Prime
Class	Medium
Cost	6,690,446 C-bills
Technical specifications
'Mech type	Clan OmniMech
Mass	55 tons
Chassis	York YT
Armor	Compound Alpha Ferro-Fibrous
Engine	275 Standard
Communications System	York Y2-Com
Targeting Tracking System	York Y-2 T&T
Heat Sinks	10 Double heat sinks
Speed	86 km/h
Armament	Primary Configuration 1x Ultra Autocannon/10 2x ER Medium Lasers 2x Medium Pulse Lasers
BV (1.0)	1,881
BV (2.0)	2,147

Description

A rarity for the normally frugal Clan Blood Spirit, the Stooping Hawk is an OmniMech in a Clan normally eschews them in favor of traditional BattleMechs.

With the rise of the OmniMech in 2854, the Blood Spirits simply assumed their perennial lack of resources would prevent them from either successfully bargaining for or fighting to secure this superior technology. The Blood Spirits were thus surprised when Clan Fire Mandrill's Kindraa Smythe-Jewell offered them OmniMech technology in exchange for territory on Foster. Now both able and eager to design their own OmniMech, the Blood Spirit scientists got their chance when Clan Ghost Bear phased out it's OmniMech Prototype A in favor of the Mad Dog, the Spirits successfully winning the Bear prototype in a Trial of Possession. This would be developed to its fullest and christened with a new name - the Stooping Hawk.

Very much an anomaly in the small and traditionally frugal Blood Spirit's touman, the Stooping Hawk's use of advanced construction materials and expensive weaponry and electronics they generally considered excessive resulted in the Spirit Khans regularly reviewing the 'Mech's performance to determine if the results continued to the justify the cost. The fact the Stooping Hawk remained in service with Clan Blood Spirit until their Annihilation was a testament to its performance on the battlefield. Operating from a similar position of weakness as the Spirits, the newly formed Clan Stone Lion would seek out and capture the production facility for the Stooping Hawk to ensure ready access to the low-cost and sturdy design for its rebuilding touman.

Weapons and Equipment

Despite Khan Ceana Boques's demand for a low-cost and rugged design, the Blood Spirit scientist caste built the Stooping Hawk around a more expensive York YT Endo Steel frame and Compound Alpha Ferro-Fibrous armor to enhance Pod Space, but even they did not dare attempt the inclusion of an Extra-Light Engine recognizing that this would be a step too far. While not as affordable as the Spirit's would have preferred, the Stooping Hawk is a sturdy 'Mech with twenty-one and a half tons pod space and a ground speed maxing out at 86kph.

The Stooping Hawk's primary configuration uses jump jets to vault up to 150 meters at a time. Its main gun is an Ultra Autocannon/10 that has enough rounds to keep it supplied throughout a traditional Trial. It is supported by four medium lasers, two extended range versions, and two pulses. The medium-range weaponry allows the 'Mech to excel at Trials where it can use cover (and its jumping ability) to its advantage.

Variants

• Alt. Config. A 

  A direct-fire support variant, the A uses a pair of ER PPCs. It retains the jump jets of the primary configuration to aid in finding a spot to snipe from. The variant also mounts seven additional double heat sinks to keep the heat buildup controlled. BV (1.0) = 2,333, BV (2.0) = 2,319

• Alt. Config. B 

  The B configuration is a missile boat that is capable of delivering forty-five long-range missiles through its three LRM-15 launchers, each of which is aided by an Artemis IV FCS. Four tons of ammunition keep it well-supplied, while a single ER Large Laser keeps it in the fight should ammunition run out. BV (1.0) = 1,709, BV (2.0) = 2,111

• Alt. Config. C 

  The Stooping Hawk C comes equipped with two ER Large Lasers and two ER Medium Lasers, all of which are guided by an advanced Targeting Computer. It also uses jump jets to vault up to 150 meters, like the A, and it makes use of seven additional double heat sinks, like the A. BV (1.0) = 2,286, BV (2.0) = 2,435

• Alt. Config. D 

  The newest variant uses heavy laser technology captured from Clan Star Adder. This all-energy variant uses an ER Large Laser, two ER Medium Lasers, and an ER Small Laser, but its punch comes from three Heavy Medium Lasers. In order to combat the massive heat buildup this design can produce, twelve double heat sinks are added. BV (1.0) = 1,639, BV (2.0) = 1,838

• Alt. Config. E 

  This bulk of this configuration's weight is taken up by an LB 10-X AC with two tons of ammunition. It is supplemented by two ER Medium Lasers and the new ATM technology, utilizing three ATM-3s with three tons of ammo between the three launchers. BV (1.0) = 1,525, BV (2.0) = 1,674

• Alt. Config. F 

  Introduced during the Jihad, this configuration was design for close-in fighting. Principly geared toward usage of energy weapons, it includes; pair of Heavy Medium Lasers & Medium Pulse Lasers, Heavy Small Lasers, and a Streak SRM 4 Launcher. Also, to enhanced its infighting abilities, its has been given eight Improved Jump Jets. Two additional Double Heat Sinks have been added to help 'Mech to cope with the additional heat. BV (2.0) = 1,988

• Alt. Config. G 

  Also introduced during the Jihad, this configuration includes Advanced Technologies developed for ProtoMechs. The 'Mech includes three torso mounted Class 4 ProtoMech Autocannons, with 2 tons of ammunition split between two torsos. Pair of ER Medium Lasers have been in each of the arm actuators. Two extra Double Heat Sinks been provided for this configuration. BV (2.0) = 1,657

Notes

In German products the unit's proper Clan name was perfectly translated to Sturzfalke.

Bibliography

• Combat Operations
• Field Manual: Crusader Clans
• Master Unit List: Battle Values
• Record Sheets: 3060
• Record Sheets: 3060 Unabridged
• Record Sheets: Upgrades
• Technical Readout: 3060
• The Wars of Reaving Supplemental