Maurer
02/14/13 03:14 PM
142.11.67.185
|
Code:
BattleMech Technical Readout
Type/Model: Fusilier FUSI-1A Tech: Inner Sphere / 3035 Config: Biped BattleMech Rules: Level 2, Standard design
Mass: 70 tons Chassis: Coventry Metal Works Model FUSI, Defiance Industries FUSI series Standard Power Plant: 280 VOX Fusion Walking Speed: 43.2 km/h Maximum Speed: 64.8 km/h Jump Jets: 4 HildCo Model 12 Standard Jump Jets Jump Capacity: 120 meters Armor Type: Lexington Limited with CASE, Glasgow Limited w. CASE Standard Armament: 2 Defiance B3L Large Lasers 2 Defiance B3M Medium Lasers 2 Coventry Light Autogun Machine Guns 1 Coventry StarLight LRM 10 1 Sure Fire 444 Anti-Missile System Manufacturer: Coventry Metal Works, Defiance Industries Location: Coventry, Hesperus II Communications System: TharHes Hm-10 Targeting & Tracking System: Cyclops Multi-Tasker 10
------------------------------------------------------------------------------ ==Overview:== With the discovery of the Helm Memory Core in 3029, every House in the Inners Sphere frantically began research new technology to upgrade their aging mech forces. In 3033, the Lyran Commonwealth Armed Forces requested Coventry Metal Works and Defiance Industries in a joint venture to develop a new heavy mech by 3035, the Fusilier, to replace more venerable mechs such as the Thunderbolt, Crusader, Rifleman, and Warhammer that can not be upgraded with newer technology due to past damage. To keep costs down, both mech producers primary use technology and equipment manufactured by either producer, rarely outsourcing from other manufactuers in the Commonwealth. One interesting feature of the Fusilier is that Coventry Metal Works and Defiance Industries both manufacture the same chassis, apart from different model numbers.
==Capabilities:== Forgoing the new xtra-light engines still in the developmental stage, the FUS-1A uses a 280 VOX standard fusion engine, capable of a standard cruising speed of 43.2 km/h and maximum speed of 64.8 km/h. A series of 12 double heatsinks allow the Fusilier to run quite cool, even during intense battles and performing jump maneuvers of 120 meters. Twelve and a half tons of Lexington Limited armor (for the Coventry model) or Glasgow Limited (Defiance Model) provide ample production, along with CASE equipment to protect against ammunition explosions.
As a general workhorse and front-line fires upport mech, the Fusilier mounts primary mid to long range weaponry. For long range combat, a Coventry Starlight LRM-10 is mounted in the left torso along with two tons of ammo. Backing up the LRM is a pair of Defiance B3L Large Lasers, mounted in the right arm and right torso. For defense, the Fusilier mounts one Defiance B3M Medium Laser in the right arm slung under the large laser (in a configuration similar to Marauder's arm) and another in the center torso. A Sure Fire 444 Anti-Missile System located in the center torso provide defense against missiles. Designers decided to install a set of Coventry Light Autogun Machine Guns in the left arm and right torso as a deterrent against infantry swarm attacks
==Variants:== There are no variants of the Fusilier FUS-1A. With the introduction of endo steel, production of FUS-1A's ceased infavor of the -2A. The few dozen 1As' produced were relocated for training duties to mech academies.
-------------------------------------------------------- Type/Model: Fusilier FUSI-1A Mass: 70 tons
Equipment: Crits Mass Int. Struct.: 107 pts Standard 0 7.00 Engine: 280 Fusion 6 16.00 Walking MP: 4 Running MP: 6 Jumping MP: 4 Heat Sinks: 12 Double [24] 3 2.00 (Heat Sink Loc: 1 RT) Gyro: 4 3.00 Cockpit, Life Supt., Sensors: 5 3.00 Actuators: L: Sh+UA+LA+H R: Sh+UA+LA 15 .00 Armor Factor: 200 pts Standard 0 12.50
Internal Armor Structure Value Head: 3 9 Center Torso: 22 29 Center Torso (Rear): 10 L/R Side Torso: 15 21/21 L/R Side Torso (Rear): 7/7 L/R Arm: 11 20/20 L/R Leg: 15 28/28
Weapons and Equipment Loc Heat Ammo Crits Mass -------------------------------------------------------- 1 Large Laser RA 8 2 5.00 1 Medium Laser RA 3 1 1.00 1 Machine Gun LA 0 100 2 1.00 (Ammo Locations: 1 LT) 1 Large Laser RT 8 2 5.00 1 Machine Gun RT 0 1 .50 1 LRM 10 LT 4 24 4 7.00 (Ammo Locations: 2 LT) 1 Anti-Missile System CT 1 12 2 1.50 (Ammo Locations: 1 LT) 1 Medium Laser CT 3 1 1.00 CASE Equipment: LT 1 .50 4 Standard Jump Jets: 4 4.00 (Jump Jet Loc: 2 LT, 2 RT) -------------------------------------------------------- TOTALS: 27 53 70.00 Crits & Tons Left: 25 .00
Calculated Factors: Total Cost: 6,568,404 C-Bills Battle Value: 1,435 Cost per BV: 4,577.29 Weapon Value: 1,563 / 1,563 (Ratio = 1.09 / 1.09) Damage Factors: SRDmg = 25; MRDmg = 14; LRDmg = 4 BattleForce2: MP: 4J, Armor/Structure: 5/5 Damage PB/M/L: 5/3/1, Overheat: 0 Class: MH; Point Value: 14 Specials: if
"Captain! We're completely surrounded on all sides." - Kiff, Futurama
..."Excellent, then we may attack in any direction." - Zapp Brannigan, Futurama
"A fool fights a war on two fronts; only an idiot defends on one." - Fusilier
|
Maurer
02/14/13 03:17 PM
142.11.67.185
|
BattleMech Technical Readout
Type/Model: Fusilier FUSI-2A Tech: Inner Sphere / 3037 Config: Biped BattleMech Rules: Level 2, Standard design
Mass: 70 tons Chassis: Coventry Metal Works Model FUSI Endo Steel, Defiance Industries FUSI series Endo Steel Endo Steel Power Plant: 280 VOX Fusion Walking Speed: 43.2 km/h Maximum Speed: 64.8 km/h Jump Jets: 4 HildCo Model 12 Standard Jump Jets Jump Capacity: 120 meters Armor Type: Lexington Limited with CASE, Glasgow Limited w. CASE Standard Armament: 3 Defiance B3L Large Lasers 2 Defiance B3M Medium Lasers 1 Coventry StarLight LRM 10 w/ Artemis IV 1 Sure Fire 444 Anti-Missile System Manufacturer: Coventry Metal Works, Defiance Industries Location: Coventry, Hesperus II Communications System: TharHes Hm-10 Targeting & Tracking System: Cyclops Multi-Tasker 10 w. Artemis FCS
------------------------------------------------------------------------------ ==Overview:== With the discovery of the Helm Memory Core in 3029, every House in the Inners Sphere frantically began research new technology to upgrade their aging mech forces. In 3033, the Lyran Commonwealth Armed Forces requested Coventry Metal Works and Defiance Industries in a voint venture to develop a new heavy mech by 3035, the Fusilier, to replace more venerable mechs such as the Thunderbolt, Crusader, Rifleman, and Warhammer that can not be upgraded with newer technology due to past damage. To keep costs down, both mech producers primary use technology and equipment manufactured by either producer, rarely outsourcing from other manufacturers in the Commonwealth. One interesting feature of the Fusilier is that Coventry Metal Works and Defiance Industries both manufacture the same chassis, apart from different model numbers.
==Capabilities:== Forgoing the new xtra-light engines still in the developmental stage, the Fusilier uses a 280 VOX standard fusion engine, capable of a standard crusing speed of 43.2 km/h and maximum speed of 64.8 km/h. A series of 12 double heatsinks allow the Fusilier to run quite cool, even during intense battles and performing jump maneuvers of 120 meters. Twelve and a half tons of Lexington Limited armor (for the Coventry model) or Glasgow Limited (Defiance Model) provide ample production, along with CASE equipment to protect against ammunition explosions.
With the rediscovery and introduction of endosteel, Coventry Metal Works and Defiance Industries ceased production of the FUS-1A. With and endosteel skeleton, the -2A frees up a significant amount of tonnage to install another heavy weapon system. To field a heavier punch and better combat the now more powerful mechs of the other Houses, a third Defiance B3L Large laser is mounted in the right torso. An Artemis IV FCS is installed along with the LRM-10 to increase accuracy at the expense of one ton of ammunition. The machine guns are removed to make room for the additional tonnage of the large laser.
==Variants:== Despite the introduction of the -3A in 3040, production of the -2A continues simply due the its effectiveness in the field.
-------------------------------------------------------- Type/Model: Fusilier FUSI-2A Mass: 70 tons
Equipment: Crits Mass Int. Struct.: 107 pts Endo Steel 14 3.50 (Endo Steel Loc: 1 HD, 3 LA, 2 RA, 2 LT, 2 RT, 2 LL, 2 RL) Engine: 280 Fusion 6 16.00 Walking MP: 4 Running MP: 6 Jumping MP: 4 Heat Sinks: 12 Double [24] 3 2.00 (Heat Sink Loc: 1 RT) Gyro: 4 3.00 Cockpit, Life Supt., Sensors: 5 3.00 Actuators: L: Sh+UA+LA+H R: Sh+UA+LA 15 .00 Armor Factor: 200 pts Standard 0 12.50
Internal Armor Structure Value Head: 3 9 Center Torso: 22 29 Center Torso (Rear): 10 L/R Side Torso: 15 21/21 L/R Side Torso (Rear): 7/7 L/R Arm: 11 20/20 L/R Leg: 15 28/28
Weapons and Equipment Loc Heat Ammo Crits Mass -------------------------------------------------------- 1 Large Laser RA 8 2 5.00 1 Medium Laser RA 3 1 1.00 2 Large Lasers RT 16 4 10.00 1 LRM 10 w/ Artemis IV LT 4 12 4 7.00 (Ammo Locations: 1 LT) 1 Medium Laser CT 3 1 1.00 1 Anti-Missile System CT 1 12 2 1.50 (Ammo Locations: 1 LT) CASE Equipment: LT 1 .50 4 Standard Jump Jets: 4 4.00 (Jump Jet Loc: 2 LT, 2 RT) -------------------------------------------------------- TOTALS: 35 66 70.00 Crits & Tons Left: 12 .00
Calculated Factors: Total Cost: 7,033,354 C-Bills Battle Value: 1,486
"Captain! We're completely surrounded on all sides." - Kiff, Futurama
..."Excellent, then we may attack in any direction." - Zapp Brannigan, Futurama
"A fool fights a war on two fronts; only an idiot defends on one." - Fusilier
|
Karagin
02/15/13 05:10 PM
72.178.85.122
|
Reminds me of the Chameleon from the original BT box set and the Crescent Hawk video games.
Karagin
Given time and plenty of paper, a philosopher can prove anything.
|
Maurer
02/25/13 06:05 PM
142.11.67.185
|
Hmm, seems I forgot to hit summit for the -3A. First some fluff I forgot to add at the beginning.
. "...The Fusilier is the a prime example of, in a mere two decades, how quickly the Houses have been able to rediscover and redevelop technologies that had not been seen since the era of the Star League, and we had kept hidden from them for centuries." - excerpt from a Comstar report.
BattleMech Technical Readout
Type/Model: Fusilier FUSI-3A Tech: Inner Sphere / 3040 Config: Biped BattleMech Rules: Level 2, Standard design
Mass: 70 tons Chassis: Coventry Metal Works Model FUSI Endo Steel, Defiance Industries FUSI series Endo Steel Endo Steel Power Plant: 280 VOX Fusion Walking Speed: 43.2 km/h Maximum Speed: 64.8 km/h Jump Jets: 4 HildCo Model 12 Standard Jump Jets Jump Capacity: 120 meters Armor Type: Lexington Limited with CASE, Glasgow Limited w. CASE Standard Armament: 1 Cyclops XII ER Large Laser 2 Defiance P5M Medium Pulse Lasers 1 Donal PPC 1 Coventry StarLight LRM 10 w/ Artemis IV 1 Sure Fire 444 Anti-Missile System Manufacturer: Coventry Metal Works, Defiance Industries Location: Coventry, Hesperus II Communications System: TharHes Hm-10 Targeting & Tracking System: Cyclops Multi-Tasker 10 w. Artemis FCS
------------------------------------------------------------------------------ ==Overview:== With the discovery of the Helm Memory Core in 3029, every House in the Inner Sphere frantically began research new technology to upgrade their aging mech forces. In 3033, the Lyran Commonwealth Armed Forces requested Coventry Metal Works and Defiance Industries in a joint venture to develop a new heavy mech by 3035, the Fusilier, to replace more venerable mechs such as the Thunderbolt, Crusader, Rifleman, and Warhammer that can not be upgraded with newer technology due to past damage. To keep costs down, both mech producers primary use technology and equipment manufactured by either producer, rarely outsourceing from other manufacturers in the Commonwealth. One interesting feature of the Fusilier is that Coventry Metal Works and Defiance Industries both manufacture the same chassis, apart from different model numbers.
==Capabilities:== Forgoing the xtra-light engines now available, the Fusilier uses a 280 VOX standard fusion engine, capable of a standard cruising speed of 43.2 km/h and maximum speed of 64.8 km/h. A series of 12 double heatsinks allow the Fusilier to run quite cool, even during intense battles and performing jump manuvers of 120 meters. Twelve and a half tons of Lexington Limited armor (for the Coventry model) or Glasgow Limited (Defiance Model) provide ample production, along with CASE equipment to protect against ammunition explosions.
Seventy percent of the production lines for the FUSI-2A are retooled to produce the -3A, with simple field refits made available to upgrade exisiting -2As.
The FUSI-3A makes uses of new laser technology to upgrade its arsenal. The standard Defiance B3M medium lasers are upgraded to Defiance P5M Medium Pulse lasers, sacrificing one-third the range of a standard laser for increased damage and accuarcy. The arm mounted Defiance B3L Large Laser is upgrade to a Cyclops XII Extended Large Laser, outsourced to and manufactured by Cyclops Incorporated. The two torso mounted large lasers are replaced with a standard Donal Particle Projection Cannon to bring the Fusilier's long range weapons within similar engagement envelops. An additional double heatsink, bringing the total up to 13, is installed into the right arm to help manage the heat created by the new laser systems. Finally, the anti-missile system is moved from the center torso to above and slightly behind the head; due to mechwarriors complaints of the cockpit view occasionally being obscured by the AMS as it attempts to engage a flight of imbound missiles.
==Variants:== Rumors from Defiance Industries' technicians suggest the -3A is only a temporary production and modification, due impart to the slow development of research in the field of Particle Projection Cannons.
-------------------------------------------------------- Type/Model: Fusilier FUSI-3A Mass: 70 tons
Equipment: Crits Mass Int. Struct.: 107 pts Endo Steel 14 3.50 (Endo Steel Loc: 3 LA, 2 RA, 2 LT, 2 RT, 1 CT, 2 LL, 2 RL) Engine: 280 Fusion 6 16.00 Walking MP: 4 Running MP: 6 Jumping MP: 4 Heat Sinks: 13 Double [26] 6 3.00 (Heat Sink Loc: 1 RA, 1 RT) Gyro: 4 3.00 Cockpit, Life Supt., Sensors: 5 3.00 Actuators: L: Sh+UA+LA+H R: Sh+UA+LA 15 .00 Armor Factor: 200 pts Standard 0 12.50
Internal Armor Structure Value Head: 3 9 Center Torso: 22 29 Center Torso (Rear): 10 L/R Side Torso: 15 21/21 L/R Side Torso (Rear): 7/7 L/R Arm: 11 20/20 L/R Leg: 15 28/28
Weapons and Equipment Loc Heat Ammo Crits Mass -------------------------------------------------------- 1 ER Large Laser RA 12 2 5.00 1 Medium Pulse Laser RA 4 1 2.00 1 PPC RT 10 3 7.00 1 LRM 10 w/ Artemis IV LT 4 12 4 7.00 (Ammo Locations: 1 LT) 1 Medium Pulse Laser CT 4 1 2.00 1 Anti-Missile System HD 1 12 2 1.50 (Ammo Locations: 1 LT) CASE Equipment: LT 1 .50 4 Standard Jump Jets: 4 4.00 (Jump Jet Loc: 2 LT, 2 RT) -------------------------------------------------------- TOTALS: 35 68 70.00 Crits & Tons Left: 10 .00
Calculated Factors: Total Cost: 7,281,554 C-Bills Battle Value: 1,483 Cost per BV: 4,910.02 Weapon Value: 1,580 / 1,531 (Ratio = 1.07 / 1.03) Damage Factors: SRDmg = 24; MRDmg = 18; LRDmg = 8 BattleForce2: MP: 4J, Armor/Structure: 5/5 Damage PB/M/L: 4/3/2, Overheat: 1 Class: MH; Point Value: 15
"Captain! We're completely surrounded on all sides." - Kiff, Futurama
..."Excellent, then we may attack in any direction." - Zapp Brannigan, Futurama
"A fool fights a war on two fronts; only an idiot defends on one." - Fusilier
|
Maurer
02/25/13 06:58 PM
142.11.67.185
|
BattleMech Technical Readout
Type/Model: Fusilier FUSI-4A Tech: Inner Sphere / 3048 Config: Biped BattleMech Rules: Level 2, Standard design
Mass: 70 tons Chassis: Coventry Metal Works Model FUSI Endo Steel, Defiance Industries FUSI series Endo Steel Endo Steel Power Plant: 280 VOX Fusion Walking Speed: 43.2 km/h Maximum Speed: 64.8 km/h Jump Jets: 4 HildCo Model 12 Standard Jump Jets Jump Capacity: 120 meters Armor Type: Lexington Limited with CASE, Glasgow Limited w. CASE Standard Armament: 1 Cyclops XII ER Large Laser 2 Defiance P5M Medium Pulse Lasers 1 Defiance 1001 ER PPC 1 Coventry StarLight LRM 10 w/ Artemis IV 1 Sure Fire 444 Anti-Missile System Manufacturer: Coventry Metal Works, Defiance Industries Location: Coventry, Hesperus II Communications System: TharHes Hm-10 Targeting & Tracking System: Cyclops Multi-Tasker 10 w. Artemis FCS
------------------------------------------------------------------------------ ==Overview:== With the discovery of the Helm Memory Core in 3029, every House in the Inner Sphere frantically began research new technology to upgrade their aging mech forces. In 3033, the Lyran Commonwealth Armed Forces requested Coventry Metal Works and Defiance Industries in a joint venture to develop a new heavy mech by 3035, the Fusilier, to replace more venerable mechs such as the Thunderbolt, Crusader, Rifleman, and Warhammer that can not be upgraded with newer technology due to past damage. To keep costs down, both mech producers primary use technology and equipment manufactured by either producer, rarely outsourceing from other manufacturers in the Commonwealth. One interesting feature of the Fusilier is that Coventry Metal Works and Defiance Industries both manufacture the same chassis, apart from different model numbers.
==Capabilities:== Forgoing the xtra-light engines now available, , the Fusilier uses a 280 VOX standard fusion engine, capable of a standard crusing speed of 43.2 km/h and maximum speed of 64.8 km/h. A series of 12 double heatsinks allow the Fusilier to run quite cool, even during intense battles and performing jump manuvers of 120 meters. Twelve and a half tons of Lexinton Limited armor (for the Coventry model) or Glasgow Limited (Defiance Model) provide ample production, along with CASE equipment to protect against ammunition explosions.
When Defiance Industries engineers were able to perfect new technologies in the field of the Particle Projection Cannon research, it was quickly applied to the Fusilier. Replacing the standard Donal PPC with a Defiance 1001 Extended Ranged PPC, the Fusilier is now able attack out to 690 meters, slowly softening a target with LRMs until the ER large laser can come into play. The new weapon has increased the heat build up potentional, but not to such critical levels the Fusilier's double heatsinks can't handle, unless the pilot gets reckless.
==Variants:== The FUSI-4A is now the standard model of the Lyran Commonwealths Fusilier mech. All -3As mechs in the field and production linesare upgraded with the new weapon. Production of -2As decreases to only a dozen units a year, unless by request.
While the -4A is the standard production model available, both companies have started production of a variation which favor their individual weapon manufacture specialty.
Coventry Metal Works produces the -4B model. A second Cyclops XII ER large laser replaces the ER PPC. The Coventry Starlight LRM-10 is upgraded to a Coventry Starfire LRM-15.
The -4C is produced by Defiance Industries. The Defiance P5M Medium Pulse Lasers are removed and replaced by a single Defiance B3M in the center torso. The arm mounted lasers are removed and replaced with a second Defiance 1001 ER PPC. One additional heatsink is added, brining the total to 14, to control the new heat levels.
Also available to more wealthy clientele are the -5 series, which replaces the standard 280 Vox fusion engine on all -4 models with a Magna 350 XL engine, increasing the Fusilier's top speed to 86.4 km/h. There are even reports of -5 series models dubbed "EM", which supposedly use advanced battlemech myomer to increase the mechs top speed and strength capiability when it researches a certain heat threshold.
-------------------------------------------------------- Type/Model: Fusilier FUSI-4A Mass: 70 tons
Equipment: Crits Mass Int. Struct.: 107 pts Endo Steel 14 3.50 (Endo Steel Loc: 3 LA, 2 RA, 2 LT, 2 RT, 1 CT, 2 LL, 2 RL) Engine: 280 Fusion 6 16.00 Walking MP: 4 Running MP: 6 Jumping MP: 4 Heat Sinks: 13 Double [26] 6 3.00 (Heat Sink Loc: 1 RA, 1 RT) Gyro: 4 3.00 Cockpit, Life Supt., Sensors: 5 3.00 Actuators: L: Sh+UA+LA+H R: Sh+UA+LA 15 .00 Armor Factor: 200 pts Standard 0 12.50
Internal Armor Structure Value Head: 3 9 Center Torso: 22 29 Center Torso (Rear): 10 L/R Side Torso: 15 21/21 L/R Side Torso (Rear): 7/7 L/R Arm: 11 20/20 L/R Leg: 15 28/28
Weapons and Equipment Loc Heat Ammo Crits Mass -------------------------------------------------------- 1 ER Large Laser RA 12 2 5.00 1 Medium Pulse Laser RA 4 1 2.00 1 ER PPC RT 15 3 7.00 1 LRM 10 w/ Artemis IV LT 4 12 4 7.00 (Ammo Locations: 1 LT) 1 Medium Pulse Laser CT 4 1 2.00 1 Anti-Missile System HD 1 12 2 1.50 (Ammo Locations: 1 LT) CASE Equipment: LT 1 .50 4 Standard Jump Jets: 4 4.00 (Jump Jet Loc: 2 LT, 2 RT) -------------------------------------------------------- TOTALS: 40 68 70.00 Crits & Tons Left: 10 .00
Calculated Factors: Total Cost: 7,451,554 C-Bills Battle Value: 1,487 Cost per BV: 5,011.13 Weapon Value: 1,450 / 1,407 (Ratio = .98 / .95) Damage Factors: SRDmg = 23; MRDmg = 15; LRDmg = 8 BattleForce2: MP: 4J, Armor/Structure: 5/5 Damage PB/M/L: 3/3/2, Overheat: 2 Class: MH; Point Value: 15
To save some eyesore, I'll just a shorten the readout of the -4B, -4C, and both -5 series. All other information is the same as the -4A, unless otherwise noted (See Fusilier FUSI-4A varients).
Fusilier FUSI-4B:
Weapons and Equipment Loc Heat Ammo Crits Mass -------------------------------------------------------- 1 ER Large Laser RA 12 2 5.00 1 Medium Pulse Laser RA 4 1 2.00 1 ER Large Laser RT 12 2 5.00 1 LRM 15 w/ Artemis IV LT 5 8 5 9.00 (Ammo Locations: 1 LT) 1 Medium Pulse Laser CT 4 1 2.00 1 Anti-Missile System HD 1 12 2 1.50 (Ammo Locations: 1 LT) CASE Equipment: LT 1 .50 4 Standard Jump Jets: 4 4.00 (Jump Jet Loc: 2 LT, 2 RT) -------------------------------------------------------- TOTALS: 38 68 70.00 Crits & Tons Left: 10 .00
Calculated Factors: Total Cost: 7,409,054 C-Bills Battle Value: 1,507
Fusilier FUSI-4C Weapons and Equipment Loc Heat Ammo Crits Mass -------------------------------------------------------- 1 ER PPC RA 15 3 7.00 1 ER PPC RT 15 3 7.00 1 LRM 10 w/ Artemis IV LT 4 12 4 7.00 (Ammo Locations: 1 LT) 1 Anti-Missile System CT 1 12 2 1.50 (Ammo Locations: 1 LT) 1 Medium Laser CT 3 1 1.00 CASE Equipment: LT 1 .50 4 Standard Jump Jets: 4 4.00 (Jump Jet Loc: 2 LT, 2 RT) -------------------------------------------------------- TOTALS: 38 71 70.00 Crits & Tons Left: 7 .00
Calculated Factors: Total Cost: 7,495,754 C-Bills Battle Value: 1,570
The -5 series simply upgrades the engine to a 350 XL on all -4 series variants. The -5 series EM matches the performance of the original -5 series variants, but adds triple strength myomer.
Type: BV: Total Cost: FUSI-5A: 1,515 16,846,886 FUSI-5AEM: 1,578 18,512,886 FUSI-5B: 1,537 16,804,386 FUSI-5BEM: 1,600 18,470,386 FUSI-5C: 1,609 16,891,086 FUSI-5CEM: 1,677 18,557,086
Author's Note: I intended to post this an idea of the time line of mech development since the rediscovery of Star League technologies up til and just before the Clan Invasion, probably pushing back/earlier and reordering some discoveries into the 3030s(seems most weapons were developed in the 3040s). If the Houses had just barely started being able to field and produce new technologies in the '40s, how were the Clans able to not just roll on forward to Terra except of course for Clan Honor and the intervention of Comstar?
"Captain! We're completely surrounded on all sides." - Kiff, Futurama
..."Excellent, then we may attack in any direction." - Zapp Brannigan, Futurama
"A fool fights a war on two fronts; only an idiot defends on one." - Fusilier
|
|
Extra information
|
0 registered and 207 anonymous users are browsing this forum.
Moderator: Nic Jansma, Cray, Frabby, BobTheZombie
Print Topic
|
Forum Permissions
You cannot start new topics
You cannot reply to topics
HTML is disabled
UBBCode is enabled
|
Topic views: 4406
|
|
|
|
|