Editing MechForce (Video Game)

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.

Latest revision		Your text
Line 1:		Line 1:
−	{{Cleanup|reason=review needed|date=September 2023}}
−	{{refimprove}}
	==Overview==		==Overview==
−	'''MechForce''' is a tactical turn based [['Mech]] (Shareware) game for the [[w:Commodore Amiga|Commodore Amiga]] home computer, written in 1988-1990 by Ralph H. Reed.	+	'''MechForce''' is a tactical turn based [['Mech]] (Shareware-) game for the [[w:Commodore Amiga|Commodore Amiga]] home computer, written in 1988-1990 by Ralph H. Reed.
	It's based on FASA Level 1 set and consists of:		It's based on FASA Level 1 set and consists of:
−	1) MechForce (the virtual tabletop game itself)	+	1) MechForce (the tabletop-like game itself)
−	2) Factory (to create, modify and repair 'Mechs) (not provided in the shareware version)	+	2) Factory (to create, modify and repair Mechs) (not provided in the shareware version)
	3) Map Editor (to create/modify custom maps)		3) Map Editor (to create/modify custom maps)
−	4) CombatOrders (to create/modify scenarios and missions)	+	4) CombatOrders (to create/modify scenarios=missions)
−	5) ConfigEd (a simple front-end to the installation settings)	+	5) ConfigEd (a simple frontend to the installation settings)
	6) Warrior (to create, modify and repair Units/Warriors)		6) Warrior (to create, modify and repair Units/Warriors)
−	It is pretty close to the original FASA rules published up to 1986 (Standard Engine, no Ferro-fibrous, no Endo Steel, no ER weapons, no Gauss, single heat sinks only) and is in most points canon. It is only capable of using BattleMechs (no AeroTech, SpaceTech, CityTech, ProtoTech, Vehicles, Armor...). Gameplay could be saved (a save penalty is used for each save) and difficulty (easy, normal, heavy, suicidal) could be chosen on each mission. Character and group development is nearly unlimited (tested: 450.000 XPs reached and 1.800 games played). Each Mission is limited by the (RAM amount each) opponents by the RAM of the Amiga, so in the 1988 version (V3.6x) it was advised not to start with more than 7 'Mechs in one game (with 2MB Chip RAM 10 'Mechs in two units works flawlessly).	+
		+
		+	It is pretty close to the original FASA rules published up to 1986 (Standard Engine, no FerroFibres, no EndoSteel, no ER weapons, no Gauss, Single Heatsinks) and is in most points canon. It is only capable of using BattleMechs (no AeroTech, SpaceTech, CityTech, ProtoTech, Vehicles, Armour...). Gameplay could be saved (a save penalty is used for each save) and difficulty (easy, normal, heavy, suicidal) could be chosen on each mission. Character and group developement is nearly unlimited (tested: 450.000 XPs reached and 1.800 games played). Each Mission is limited by the (RAM amount each) opponents by the RAM of the Amiga, so in the 1988 version (V3.6x) it was advised not to start with more than 7 Mechs in one game (with 2MB Chip RAM 10 mechs in two units works flawlessly).
	==Details==		==Details==
Line 25:		Line 25:
	V4.0+ was already the successor MechCombat.		V4.0+ was already the successor MechCombat.
−	Its ability to modify standard 'Mechs in a lot of ways and the mission editor makes it ideal for prolonged service. With a limited factory stock (e.g. limited ammo, replacement parts, ....) a real tabletop campaign could be played.	+
		+	It's ability to modify standard mechs in a lot of ways and the mission editor makes it ideal for prolonged service. With a limited factory stock (e.g. limited ammo, replacement parts, ....) a real tabletop campaign could be played.
	'''Limitations:'''		'''Limitations:'''
−	-The AI engine is limited on some cases (jump capable 'Mechs always jump when possible, all 'Mechs try to rush to your place even fire support or long range 'Mechs, sometimes 'Mechs concentrate on one spot when it'd not see/find the opponent). On the other hand, the AI takes advantage of concentrating fire on one opponent, apply modifiers when chance is too low. Tries to reach some points at the same time so that not a single one is especially exposed.	+	-The AI engine is limited on some cases (jump capable mechs always jump when possible, all mechs try ot rush to your place even fire support or longrange Mechs, sometimes mechs concentrate on one spot when it'd not see/find the opponent). On the other hand the AI takes advantage of concentrating fire on one opponent, apply modifiers when chance is too low. Tries to reach some points at the same time so that not a single one is especially exposed.
−	-The factory is on some points not canon (e.g. allows a 4,9ton overweight and no limit to how much armor you apply to each spot (the standard double of the internal structure is not used), so you could create unique designs. A 'Mech is limited to ten weapons as well.	+	-The factory is on some points not canon (e.g. allows a 4,9ton overweight and no limit to how much armour you apply to each spot (=2*Internal structure is not used), so you could create quite unique designs). A mech is limited to ten weapons maximum.
−	-no real campaign editor to knit more missions into one row.	+	-no real campaign editior to knit more missions into one row
	-Technicians gains very low XPs so it took very long (~20*) to reach veteran or better		-Technicians gains very low XPs so it took very long (~20*) to reach veteran or better
−	-Superhuman Warriors (Attribute level 12 with role modifiers -2) are possible on both sides	+	-Super human Warriors (Attribute level 12 with role modifiers -2) are possible on both sides
−
−	-A very rare AI function (for most games) gives the possibility for AI opponents to 'flee from combat':
−	a) too fast hit ratio on himself
−	b) early critical hits (head, leg)
−	c) most of the opponent force is disabled
−	d) mission goal is no longer accomplishable
−	Exactly this function makes some missions very hard to fulfil!
	'''Difficulty:'''		'''Difficulty:'''
−	This is a simple multiplier to your tonnage, while the level of the opponents are not influenced by the multiplier, with skills varying wildly.	+	is a simple multiplier to your tonnage (the level of the opponents are not influenced by the multiplier, but the skill vary wildly)
	easy ~0,7		easy ~0,7
Line 59:		Line 53:
−	''''Mechs:'''	+	'''Mechs:'''
−	The shareware version only contained about 40 'Mechs separated into light/medium/heavy/assault classes and contained the most known "Succession Wars" 2780 'Mechs.	+	The shareware version only contained about 40 mechs separated into light/medium/heavy/assault classes and contained the most known "Succession Wars" 2780 mechs.
−	The licensed version came with about 150 'Mechs including the 'Unseen Ones' and a few Clan 'Mechs with Level 1 tech.	+	The licensed version came with about 150 Mechs incl. the 'Unseen Ones' and a few (later CLAN) names with Level 1 tech.
−	You could set up in each of the four folders up to 245 'Mechs from which the AI draws the opponents pool.	+	You could have in each of the four folders up to 245 mechs each from which the AI derives the opponents (computer as opponent) from.
	'''Gameplay:'''		'''Gameplay:'''
−	-creation of warriors to do single plays (no Repair/Modifyshop is then available but full repair); a unit is the next step if you want to have control over stock, modify and enhance your unit to play with + choose 'Mech from selection; with a unit or with enough C-Bills you can sell the old one, salvage it with a unit selection and buy a new one.	+	-creation of warrior/unit to play with + chose mech from selection
	-choose between Arena, simulator, roving and mission mode + difficulty level + different units		-choose between Arena, simulator, roving and mission mode + difficulty level + different units
Line 76:		Line 70:
	-choose warrior/unit to play with and last trimming which input control (Joystick, Keyboard, Mouse, Computer=AI)		-choose warrior/unit to play with and last trimming which input control (Joystick, Keyboard, Mouse, Computer=AI)
−	-play turn based and lose/win	+	-play turn based and loose/win
	-Factory=> repair your damage, restock ammo; if money/spare parts are out=> modify or go damaged into the new round		-Factory=> repair your damage, restock ammo; if money/spare parts are out=> modify or go damaged into the new round
Line 92:		Line 86:
	b) do the manual repair for the whole company in one go		b) do the manual repair for the whole company in one go
−	c) make expensive (and not-canon) upgrades and allow campaigns, safe modified standard 'Mech models	+	c) make expensive (and not-canon) upgrades and allow campaigns, safe modified standard mech modells
−	d) import of other 'Mech designs/missions/maps (most expanded version is from Joona Palaste)	+	d) import of other mech designs/missions/maps (most expanded version is from Joona Palaste)
−	The four plugins (partly shareware itself) commonly known are called tec2war, HQ, MechForceHQ and Headquarter.	+	The four plugins (partly shareware itself) I know are called tec2war, HQ, MechForceHQ and Headquarter.
	==Version History==		==Version History==
−	<V3.60 BattleForce Versions starting from ~1986	+	V3.60   First Public version 03_1988
−	V3.60 First Public version branded MechForce 03_1988	+	V3.65  Bug cleaned version=Licensed 07_1988
−	V3.65 Bug cleaned version=Licensed 07_1988	+	V3.70  Bug cleaned version=Licensed 10_1988
−	V3.70 Bug cleaned version=Licensed 10_1988; starting from 3.72 the status of the 'Mech/Warrior was visible (different colors) when browsing, so damaged/wounded objects could visibly be found when selecting in combat or factory menu	+	V3.76  addons in pulldown menu while gameplay+small corrections in warrior programm+Bug cleaned version, early 1989
−	V3.76 addons in pulldown menu while gameplay+small corrections in warrior program+Bug cleaned version, early 1989	+	V3.77   Bug cleaned version, 06_1989
−
−	V3.77 Bug cleaned version, 06_1989
−
−	V4.00 Renamed to MechCombat and integrated Clan Tech (BT Level 2), same AI and only canon 'Mechs. Factory was completely reworked and partly could build fortresses, tanks, vehicles, skimmers, ..., The Combat module was partly reworked and allowed bigger maps (but no non-'Mech gear); Warrior module was expanded to Clan level ~1993
	==Trivia==		==Trivia==
−	The V3.60 used fuel based jump jets for 'Mechs, which was at that time already obsolete by FASA regulation. In 3.65 it was already changed to the standard.	+	The V3.60 used fuel based jump jets for Mechs, which was at that time already absolete by FASA regulation. In 3.65 it was already changed to the standard.
−
−	The Factory allows you to create any engine for the 'Mechs (e.g. a Pitban 195 engine). It's based on seconds/per move, which seems a very old formula used by the FASA team in the beginning until standard engine ratings took over.
−
−	Before it was named MechForce, Mr. Reed called it BattleForce and published Versions prior to V3.6
−
−	The successor is called MechCombat and starts with V4.x, while same in style, naming, gameplay and GUI it integrated Clan elements and enlarged the board.
	==Get the game going on today computers==		==Get the game going on today computers==
Line 128:		Line 112:
	-A fitting KickstartROM (License!); I'd advise a V2.0 or higher, but the 1.2 works as well		-A fitting KickstartROM (License!); I'd advise a V2.0 or higher, but the 1.2 works as well
−	-Set it to an OCS Emulated A500+ or A2000 or A3000/4000 setting with pref. 512kB–1MB ChipRAM (2MB is somehow buggy for whatever reason) and 2MB FastRAM; PAL Emulation (=higher Resolution compared to NTSC), two Floppy Drives with DD or one with HD (ROM V2.x+ needed); I'll keep the two disk version at it's the most common.	+	-Set it to an OCS Emulated A500+ or A2000 or A3000/4000 setting with pref. 2MB ChipRAM and 2MB FastRAM; PAL Emulation (=higher Resolution compared to NTSC), two Floppy Drives with DD or one with HD (ROM V2.x+ needed)
	DF0: min. Workbench + all the executables (it's explained in the readme in the lha/zip file) in the root folder		DF0: min. Workbench + all the executables (it's explained in the readme in the lha/zip file) in the root folder
−	DF1: the 'Mechs + unit files in according subfolders	+	DF1: the mechs + unit files in according subfolders
	-A fitting Workbench starting with V1.2 (again 2.0 and higher is advised as a lot of bugs were cleaned out) (License!)		-A fitting Workbench starting with V1.2 (again 2.0 and higher is advised as a lot of bugs were cleaned out) (License!)
Line 140:		Line 124:
	For Windows it might come handy to use the set AmigaForever from Cloanto, which comes with ready emulations and ROMs and Workbenches on a licensed basis.		For Windows it might come handy to use the set AmigaForever from Cloanto, which comes with ready emulations and ROMs and Workbenches on a licensed basis.
−	The ConfigEd program is needed top set the paths of the app/folder of each setting (where are the 'Mechs, where am I allowed to save, where are the units, ...) and is the first thing to do.	+	The ConfigEd programm is needed top set the pathes of the app/folder of each setting (where are the mechs, where am I allowed to save, where are the units, ...) and is the first thing to do.
	a DF0: might look like mine:		a DF0: might look like mine:
−		+	"
−	Folders:
	c		c
		+	Clan
	devs		devs
	fonts		fonts
Line 153:		Line 137:
	L		L
	libs		libs
−	Modules
	Prefs		Prefs
	s		s
	Snd		Snd
		+	T
		+	Temp
		+	Units
		+	Warriors
		+	Catalogs
		+	Docs
		+	Fonts
		+	Games
		+	Icons
		+	Images
		+	Libs
		+	Maps
		+	Mechs
		+	Modules
		+	Orders
	Sounds		Sounds
	Src		Src
−	T
−	Temp
−
−
−	Files:
	AffilNames		AffilNames
	_maps&orders.lha		_maps&orders.lha
Line 212:		Line 205:
	"		"
−	while a DF1: contains only folders:	+	while a DF1: contains:
−
	"		"
−	Docs
	Maps		Maps
	Mechs		Mechs
Line 223:		Line 214:
	Warriors		Warriors
	"		"
		+
	==Downloads==		==Downloads==
	===Downloads on Sarna===		===Downloads on Sarna===
	* [http://www.sarna.net/files/programs/games/mechforce_amiga/ All Downloads]		* [http://www.sarna.net/files/programs/games/mechforce_amiga/ All Downloads]
−
−	In 2020 Sam van Ratt reworked all available and collected Missions (called 'Orders' and 'Maps') so they work again as most missions were missing the according map/surroundings. As on the init screen you could choose side A oder B the collected 157 missions accounts to 314 different mission setups in various map setups (mostly random or created by user init). The text setup was mostly left as they fit the mission, but sometimes adopted to a different plot [Succession Wars, CLAN invasion, Jihad, Dark Age, Fun Setup]. Specific rank, planets and persons were integrated or corrected to fit the canon timeline.
−
−	* [https://www.sarna.net/files/info/programs/games/mechforce_amiga/mfmc_maps_orders.lha MFMC Maps & Orders]
−
−	And this download with live screenshots of the orders (so anyone could read the mission objectives) and the according (genereated) map:
−	* [https://www.sarna.net/files/info/programs/games/mechforce_amiga/mfmc_maps_orders_screenshots.zip MFMC Maps & Orders & Screenshots]
	==References==		==References==

Anti-spam check. Do not fill this in!

==Overview== '''MechForce''' is a tactical turn based [['Mech]] (Shareware-) game for the [[w:Commodore Amiga|Commodore Amiga]] home computer, written in 1988-1990 by Ralph H. Reed. It's based on FASA Level 1 set and consists of: 1) MechForce (the tabletop-like game itself) 2) Factory (to create, modify and repair Mechs) (not provided in the shareware version) 3) Map Editor (to create/modify custom maps) 4) CombatOrders (to create/modify scenarios=missions) 5) ConfigEd (a simple frontend to the installation settings) 6) Warrior (to create, modify and repair Units/Warriors) It is pretty close to the original FASA rules published up to 1986 (Standard Engine, no FerroFibres, no EndoSteel, no ER weapons, no Gauss, Single Heatsinks) and is in most points canon. It is only capable of using BattleMechs (no AeroTech, SpaceTech, CityTech, ProtoTech, Vehicles, Armour...). Gameplay could be saved (a save penalty is used for each save) and difficulty (easy, normal, heavy, suicidal) could be chosen on each mission. Character and group developement is nearly unlimited (tested: 450.000 XPs reached and 1.800 games played). Each Mission is limited by the (RAM amount each) opponents by the RAM of the Amiga, so in the 1988 version (V3.6x) it was advised not to start with more than 7 Mechs in one game (with 2MB Chip RAM 10 mechs in two units works flawlessly). ==Details== The latest version is V3.77 from late 1990 and runs perfectly on UAE V3.x(+) on an emulated A500 (1MB) with two floppy drives (app+mechs) and AmigaOS V1.2 or higher. V4.0+ was already the successor MechCombat. It's ability to modify standard mechs in a lot of ways and the mission editor makes it ideal for prolonged service. With a limited factory stock (e.g. limited ammo, replacement parts, ....) a real tabletop campaign could be played. '''Limitations:''' -The AI engine is limited on some cases (jump capable mechs always jump when possible, all mechs try ot rush to your place even fire support or longrange Mechs, sometimes mechs concentrate on one spot when it'd not see/find the opponent). On the other hand the AI takes advantage of concentrating fire on one opponent, apply modifiers when chance is too low. Tries to reach some points at the same time so that not a single one is especially exposed. -The factory is on some points not canon (e.g. allows a 4,9ton overweight and no limit to how much armour you apply to each spot (=2*Internal structure is not used), so you could create quite unique designs). A mech is limited to ten weapons maximum. -no real campaign editior to knit more missions into one row -Technicians gains very low XPs so it took very long (~20*) to reach veteran or better -Super human Warriors (Attribute level 12 with role modifiers -2) are possible on both sides '''Difficulty:''' is a simple multiplier to your tonnage (the level of the opponents are not influenced by the multiplier, but the skill vary wildly) easy ~0,7 normal ~1,0 heavy ~1,4 suicidal ~1,6...2,2 '''Mechs:''' The shareware version only contained about 40 mechs separated into light/medium/heavy/assault classes and contained the most known "Succession Wars" 2780 mechs. The licensed version came with about 150 Mechs incl. the 'Unseen Ones' and a few (later CLAN) names with Level 1 tech. You could have in each of the four folders up to 245 mechs each from which the AI derives the opponents (computer as opponent) from. '''Gameplay:''' -creation of warrior/unit to play with + chose mech from selection -choose between Arena, simulator, roving and mission mode + difficulty level + different units -accept (or restart) the random generated map (21*29 Hexes) -choose warrior/unit to play with and last trimming which input control (Joystick, Keyboard, Mouse, Computer=AI) -play turn based and loose/win -Factory=> repair your damage, restock ammo; if money/spare parts are out=> modify or go damaged into the new round -Warrior=> change available XPs to character points and upgrade skills -play anew '''Plugins+AddOns:''' In the following years up to 1997 there has been a steady fanbased community who developed tools to a) change a technician to warrior and vice versa b) do the manual repair for the whole company in one go c) make expensive (and not-canon) upgrades and allow campaigns, safe modified standard mech modells d) import of other mech designs/missions/maps (most expanded version is from Joona Palaste) The four plugins (partly shareware itself) I know are called tec2war, HQ, MechForceHQ and Headquarter. ==Version History== V3.60 First Public version 03_1988 V3.65 Bug cleaned version=Licensed 07_1988 V3.70 Bug cleaned version=Licensed 10_1988 V3.76 addons in pulldown menu while gameplay+small corrections in warrior programm+Bug cleaned version, early 1989 V3.77 Bug cleaned version, 06_1989 ==Trivia== The V3.60 used fuel based jump jets for Mechs, which was at that time already absolete by FASA regulation. In 3.65 it was already changed to the standard. ==Get the game going on today computers== -Obviously WinUAE for Windows or PUAE for Linux or Basilisk II for Mac as base emulator -A fitting KickstartROM (License!); I'd advise a V2.0 or higher, but the 1.2 works as well -Set it to an OCS Emulated A500+ or A2000 or A3000/4000 setting with pref. 2MB ChipRAM and 2MB FastRAM; PAL Emulation (=higher Resolution compared to NTSC), two Floppy Drives with DD or one with HD (ROM V2.x+ needed) DF0: min. Workbench + all the executables (it's explained in the readme in the lha/zip file) in the root folder DF1: the mechs + unit files in according subfolders -A fitting Workbench starting with V1.2 (again 2.0 and higher is advised as a lot of bugs were cleaned out) (License!) -the download of the Application+Mechs from the section below For Windows it might come handy to use the set AmigaForever from Cloanto, which comes with ready emulations and ROMs and Workbenches on a licensed basis. The ConfigEd programm is needed top set the pathes of the app/folder of each setting (where are the mechs, where am I allowed to save, where are the units, ...) and is the first thing to do. a DF0: might look like mine: " c Clan devs fonts Games Images Is L libs Prefs s Snd T Temp Units Warriors Catalogs Docs Fonts Games Icons Images Libs Maps Mechs Modules Orders Sounds Src AffilNames _maps&orders.lha _mechforce.lha _std_mechs.lha .backdrop BattleManual BattleManual.info Config_update.BAK ConfigEd ConfigEd_Doc ConfigEd_Doc.info ConfigEd.info ConvertFame ConvertFame.info DirectoryOpus DirectoryOpus.info Disk.info Factory Factory_Doc Factory_Doc.info Factory.info HeadQuarters HeadQuarters.info Docs.info File_ID.DIZ Fonts.info Games.info Headquarters Headquarters.info Icons.info Images.info Install Install.info Libs.info Maps.info MechForce MechForce.cfg MechForce.info Mechs.info Modules.info Orders.info ReadMe ReadMe.info Sounds.info Units.info Warriors.info " while a DF1: contains: " Maps Mechs Offers Orders Units Warriors " ==Downloads== ===Downloads on Sarna=== * [http://www.sarna.net/files/programs/games/mechforce_amiga/ All Downloads] ==References== <references /> [[Category:Unofficial Video Games]]

Summary:

Please note that all contributions to BattleTechWiki are considered to be released under the GNU FDL 1.2 (see BattleTechWiki:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

To edit this page, please answer the question that appears below (more info):

The home planet of humanity is called ____

Cancel Editing help (opens in new window)

Advanced templates:

Editing: {{Merge}}   {{Moratorium}}   {{Otheruses| | | }}

Notices: {{NoEdit}}   {{Sign}}   {{Unsigned|name}}   {{Welcome}}

Administration: {{Essay}}   {{Policy}}   {{Procedure}}

Templates used on this page:

• Template:Ambox (edit)
• Template:Category handler (edit)
• Template:Cleanup (edit)
• Template:Main other (edit)
• Template:More citations needed (edit)
• Template:Refimprove (edit)
• Template:SUBJECTSPACE formatted (edit)
• Template:Terminate sentence (edit)
• Module:Arguments (edit)
• Module:Category handler (edit)
• Module:Category handler/blacklist (edit)
• Module:Category handler/config (edit)
• Module:Category handler/data (edit)
• Module:Category handler/shared (edit)
• Module:Message box (view source) (protected)
• Module:Message box/configuration (edit)
• Module:Namespace detect/config (edit)
• Module:Namespace detect/data (edit)
• Module:No globals (edit)
• Module:Text (edit)
• Module:Unsubst (edit)
• Module:Yesno (edit)

This page is a member of 2 hidden categories:

• Category:Articles needing additional references
• Category:Articles needing cleanup