Difference between revisions of "Myomer"

(Myomer)
 
 
(16 intermediate revisions by 11 users not shown)
Line 1: Line 1:
'''Myomer''' was artificially created component resembling biological muscles, though being much more effective in strength to weight ratio. They are engaged with electrical current, and the strength of whole myomer depends on amount of fibers in it activated, not the current provided (though it has to be high enough to activate them).
+
[[File:Color-mech-components-2.png|thumb|right|200px|[[BattleMech]] Myomer]]
 +
==Description==
 +
'''Myomer''' is an artificial analog of biological muscles with a greater strength to weight ratio. They are engaged with electrical current and its strength depends on the amount of fibers activated, not the current provided.
  
In order to operate a very high current need to flow through myomers. Through fingers of Mechs the multi-kilowatt current flows, and this raises multiple times when it comes to big once, like on the legs. Myomers have high electrical resistance, causing large sparse heat production, a heat which needs to be dispersed or the fibers will fry themselves. However this also give Mechs an advantage - myomers cannot be stunned or shred apart by electrical discharges, even more as Mech armor have low resistance discharging any strong electrical hits (like the one from thunderbolt) into the ground.
+
Myomer requires large amounts of electrical voltage to function, with the larger "muscles" obviously requiring more energy than smaller ones. However, they have high electrical resistance, causing large amounts of waste heat which needs to be dispersed or the fibers will fry themselves. This does however grant an advantage as myomer cannot be stunned by electrical discharges. Additionally, metal armor and skeletons have a low electrical resistance, channeling and discharging any strong electrical hits into the ground.
  
==Production and composition==
+
In a way, myomer is the reason BattleMechs are the supreme war machines they are; the myomer is an extremely efficient and load-bearing form of locomotion, but cannot be used in a wheeled, tracked, or airborne platform due to the nature of its operation. As such, even though BattleMechs present much greater surface area that must be armored, and much more structure to be carried, myomer still allows them to bear more weapons and armor per-ton than any other form of armored fighting vehicle.{{cn}}
Myomers were made of microscopical polyacetylene tubes filled with a acti-strandular fiber. Fibers are creation of biologically engineered bacteria which is mixed with specific polymers and than it all is squirted into the tubes. Later on the tubes are put under electricity thanks to which fibers arrange themselves into a complex nanostructure in a mood of myosin and actin proteins in biological muscles.  
+
 
 +
==Production and Composition==
 +
Myomer is composed of microscopic polyacetylene tubes filled with an acti-strandular fiber. These fibers are created by mixing biologically engineered bacteria with specific polymers within the tubes. An electric current is sent through these tube, causing the fibers to arrange themselves into a complex nano-structure similar to the proteins myosin and actin that allow biological muscles their movement.
 +
 
 +
==Development==
 +
Myomer fibers were first developed in [[2350]] by [[Terran Hegemony]] researcher Professor [[Gregory Atlas]] during the research project, called [[Operation Musclebound]].
  
 
==Bibliography==
 
==Bibliography==
* Tech Manual
+
* ''[[TechManual]]''
 +
 
 
[[Category: Technology]]
 
[[Category: Technology]]

Latest revision as of 00:09, 19 March 2022

BattleMech Myomer

Description[edit]

Myomer is an artificial analog of biological muscles with a greater strength to weight ratio. They are engaged with electrical current and its strength depends on the amount of fibers activated, not the current provided.

Myomer requires large amounts of electrical voltage to function, with the larger "muscles" obviously requiring more energy than smaller ones. However, they have high electrical resistance, causing large amounts of waste heat which needs to be dispersed or the fibers will fry themselves. This does however grant an advantage as myomer cannot be stunned by electrical discharges. Additionally, metal armor and skeletons have a low electrical resistance, channeling and discharging any strong electrical hits into the ground.

In a way, myomer is the reason BattleMechs are the supreme war machines they are; the myomer is an extremely efficient and load-bearing form of locomotion, but cannot be used in a wheeled, tracked, or airborne platform due to the nature of its operation. As such, even though BattleMechs present much greater surface area that must be armored, and much more structure to be carried, myomer still allows them to bear more weapons and armor per-ton than any other form of armored fighting vehicle.[citation needed]

Production and Composition[edit]

Myomer is composed of microscopic polyacetylene tubes filled with an acti-strandular fiber. These fibers are created by mixing biologically engineered bacteria with specific polymers within the tubes. An electric current is sent through these tube, causing the fibers to arrange themselves into a complex nano-structure similar to the proteins myosin and actin that allow biological muscles their movement.

Development[edit]

Myomer fibers were first developed in 2350 by Terran Hegemony researcher Professor Gregory Atlas during the research project, called Operation Musclebound.

Bibliography[edit]