Difference between revisions of "Predator (BattleMech)"

m (added introduction dates)
m
Line 21: Line 21:
  
 
==Description==
 
==Description==
The '''''Predator''''' is a second-line [[BattleMech]] that is the product of a cooperative venture between the various [[Clan Fire Mandrill]] Kindraa. It is protected by eleven and a half tons of armor and can move at a respectable speed for a heavy 'Mech. Useful as either a medium-range duelist or a close-up skirmisher, it can use its autocannons to deal a strong punch, then follow up with cluster rounds that exploit holes in an enemy 'Mech's armor.<ref name=TRO3060/>
+
The '''''Predator''''' is a second-line [[BattleMech]] that is the product of a cooperative venture between the various [[Clan Fire Mandrill]] Kindraa. It is protected by eleven and a half tons of armor and can move at a respectable speed for a heavy 'Mech. Useful as either a medium-range duelist or as a close-up skirmisher, it can use its autocannons to deal a strong punch, then follow up with cluster rounds that exploit holes in an enemy 'Mech's armor.<ref name=TRO3060/>
  
 
==Armament==
 
==Armament==
Roughly a third of the ''Predator'''s mass is consumed by the twin Faraday [[LB 10-X Autocannon]]. These have ample ammunition for most [[Clan]] Trials and usually stock both cluster and slug rounds. They are supported by a pair of Series 2FM [[ER Medium Laser]]s and paired Series 1 [[ER Small Laser]]s. Not only can the lasers keep the symmetrical design in the fight after its autocannon ammunition runs out, they do not create a burden on the 'Mech's ability to control heat under normal circumstances. Ten [[double heat sink]]s is all the ''Predator'' needs to keep its heat in check.<ref name=TRO3060/>
+
Roughly a third of the ''Predator'''s mass is consumed by two Faraday [[LB 10-X Autocannon]]s. These have ample ammunition for most [[Clan]] Trials and usually stock both cluster and slug rounds. They are supported by a pair of Series 2FM [[ER Medium Laser]]s and paired Series 1 [[ER Small Laser]]s. Not only can the lasers keep the symmetrical design in the fight after its autocannon ammunition runs out, they do not create a burden on the 'Mech's ability to control heat under normal circumstances. Ten [[double heat sink]]s is all the ''Predator'' needs to keep its heat in check.<ref name=TRO3060/>
  
 
==Variants==
 
==Variants==
* ''Predator 2'' - Introduced during the [[Jihad]] era in [[3075]]<ref name=MUL/>, the variant is a revision of its weaponry and armor.  The 'mech's armor has been replaced with [[Ferro-Fibrous|Ferro-Fibrous armor]] for slightly increased protection.  Its LB-X Class autocannons have been replaced by a pair of [[HAG 20|Class 20 Hyper Assault Gauss Rifles]] with 4 tons of ammunition split between the two torsos.  While two ER Small Lasers have been retained, its ER Mediums have been exchanged for pair of [[Medium Pulse Lasers]]. BV (2.0) = 2,159<ref>''Record Sheets: 3060 Unabridged'' p. 251, "Jihad era variant of the Predator".</ref>
+
* ''Predator 2'' - Introduced during the [[Jihad]] era in [[3075]]<ref name=MUL/>, the variant is a revision of its weaponry and armor.  The 'Mech's armor has been replaced with [[Ferro-Fibrous|Ferro-Fibrous armor]] for slightly increased protection.  Its LB-X Class autocannons have been replaced by a pair of [[HAG 20|Class 20 Hyper Assault Gauss Rifles]] with 4 tons of ammunition split between the two torsos.  While two ER Small Lasers have been retained, its ER Mediums have been exchanged for pair of [[Medium Pulse Lasers]]. BV (2.0) = 2,159<ref>''Record Sheets: 3060 Unabridged'' p. 251, "Jihad era variant of the Predator".</ref>
  
 
==References==
 
==References==

Revision as of 17:13, 27 December 2011

Predator (BattleMech)
Predator
Production information
Manufacturer Kindraa Faraday-Tanaga Tertiary Facility
Model PDR
Class Heavy
Introduced 3060[1]
Cost 12,152,800 C-bills
Technical specifications
Mass 60 tons
Chassis Process 3 Standard
Armor 17-J Standard
Engine Dagda-Production Series A 300 XL
Speed 86 km/h
Armament
BV (1.0) 1,592[2]
BV (2.0) 1,754[3][4]


Description

The Predator is a second-line BattleMech that is the product of a cooperative venture between the various Clan Fire Mandrill Kindraa. It is protected by eleven and a half tons of armor and can move at a respectable speed for a heavy 'Mech. Useful as either a medium-range duelist or as a close-up skirmisher, it can use its autocannons to deal a strong punch, then follow up with cluster rounds that exploit holes in an enemy 'Mech's armor.[4]

Armament

Roughly a third of the Predator's mass is consumed by two Faraday LB 10-X Autocannons. These have ample ammunition for most Clan Trials and usually stock both cluster and slug rounds. They are supported by a pair of Series 2FM ER Medium Lasers and paired Series 1 ER Small Lasers. Not only can the lasers keep the symmetrical design in the fight after its autocannon ammunition runs out, they do not create a burden on the 'Mech's ability to control heat under normal circumstances. Ten double heat sinks is all the Predator needs to keep its heat in check.[4]

Variants

  • Predator 2 - Introduced during the Jihad era in 3075[1], the variant is a revision of its weaponry and armor. The 'Mech's armor has been replaced with Ferro-Fibrous armor for slightly increased protection. Its LB-X Class autocannons have been replaced by a pair of Class 20 Hyper Assault Gauss Rifles with 4 tons of ammunition split between the two torsos. While two ER Small Lasers have been retained, its ER Mediums have been exchanged for pair of Medium Pulse Lasers. BV (2.0) = 2,159[5]

References

  1. 1.0 1.1 Master Unit List, "Predator introduction dates"
  2. Combat Operations, p. 110
  3. Record Sheets: 3060 Unabridged, p. 250
  4. 4.0 4.1 4.2 Technical Readout: 3060, pp. 166-167, "Predator 'Mech Profile"
  5. Record Sheets: 3060 Unabridged p. 251, "Jihad era variant of the Predator".

Bibliography