Difference between revisions of "Harrier (Combat Vehicle)"

(Updated page to RG: ilClan, vol. 31 cannon. Hid previous information about Canonicity.)
m (minor formatting, adding disambig note)
Line 1: Line 1:
 
{{Update Needed|[[Recognition Guide: ilClan, vol. 31]]}}
 
{{Update Needed|[[Recognition Guide: ilClan, vol. 31]]}}
 +
{{otheruses|the hover tank|the troop transport|Condor (DropShip class)}}
 
{{InfoBoxCombatVehicle
 
{{InfoBoxCombatVehicle
 
| image = Harrier Hover Tank RGilClan v31.jpg
 
| image = Harrier Hover Tank RGilClan v31.jpg
Line 10: Line 11:
 
| cost =  
 
| cost =  
 
| mass = 50 tons
 
| mass = 50 tons
| armor = Standard<ref name = "RG31R">''Recognition Guide: ilClan, vol. 31'' p. 22-24''</ref>
+
| armor = Standard<ref name = "RG31R">''Recognition Guide: ilClan, vol. 31'', pp. 22–24</ref>
 
| engine = [[Vlar 265 Fusion]]
 
| engine = [[Vlar 265 Fusion]]
 
| comsys = [[ Maxell 600b]]
 
| comsys = [[ Maxell 600b]]
Line 25: Line 26:
  
 
==Description==
 
==Description==
The '''Harrier''' was initially commissioned by the [[SLDF]] in 2749 and was intended as a general-purpose support for [[BattleMech]] operations but would be more commonly used for cavalry and long-range reconnaissance <ref name = "RG31">''Recognition Guide: ilClan, vol. 31'' p. 6-7''</ref>. As the Succession Wars ground on, the necessary scavenger habits of the Inner Sphere would strip many fusion powered tanks of their engines to provide spares for 'Mechs with the ''Harrier'' only escaping due to the rare [[Vlar 265]] which was primarily used in the civilian sector. The ''Harrier'' would cease production after the [[Free Worlds League]] captured [[Carver V]] in the mid-thirtieth century and [[Ingrid Liao]] refused to rebuild the production line. The ''Harrier'' would return after the [[Drillson]] sparked a renaissance in fusion powered hovercraft. It would make a significant return after the [[Federated Commonwealth]] captured Carver V during the [[Fourth Succession War]] as part of the FedComm fusion revival program which would culminate in the [[Fulcrum]] and [[Condor]]<ref name = "RG31"/>.
+
The '''Harrier''' was initially commissioned by the [[SLDF]] in 2749 and was intended as a general-purpose support for [[BattleMech]] operations but would be more commonly used for cavalry and long-range reconnaissance.<ref name = "RG31">''Recognition Guide: ilClan, vol. 31'', pp. 6–7</ref> As the Succession Wars ground on, the necessary scavenger habits of the Inner Sphere would strip many fusion powered tanks of their engines to provide spares for 'Mechs with the Harrier only escaping due to the rare [[Vlar 265]] which was primarily used in the civilian sector. The Harrier would cease production after the [[Free Worlds League]] captured [[Carver V]] in the mid-thirtieth century and [[Ingrid Liao]] refused to rebuild the production line. The Harrier would return after the [[Drillson]] sparked a renaissance in fusion powered hovercraft. It would make a significant return after the [[Federated Commonwealth]] captured Carver V during the [[Fourth Succession War]] as part of the FedComm fusion revival program which would culminate in the [[Fulcrum]] and [[Condor (Combat Vehicle)|Condor]].<ref name = "RG31"/>
 +
 
 
==Armament==
 
==Armament==
The Harrier has a [[Large Laser]] as its primary weapon, backed up by an [[SRM-6]] launcher fed by one ton of ammunition. A single [[medium laser]] covers the rear arc of the vehicle.
+
The Harrier has a [[large laser]] as its primary weapon, backed up by an [[SRM-6]] launcher fed by one ton of ammunition. A single [[medium laser]] covers the rear arc of the vehicle.
  
 
==Variants==
 
==Variants==
*; Re-Laser : Modern ''Harriers'' are a product of [[Julian Davion]] and [[Devlin Stone]]'s alliance, with the First Prince leaving behind schematics for the [[Laser | Re-engineered Laser]] when he passed through the Fortress Wall in [[3146]]<ref name = "RG31"/>. The [[Republic of the Sphere]] would rush through production and deployment of the technology. The Re-Laser variant mounts a single [[ChisComp 87]] [[Large Re-Engineered Laser]], a [[Streak SRM-6]], and a [[Medium Laser]]<ref name = "RG31"/>.The single ton of Streak ammunition is protected by a CASE bin and the Standard armor is replaced by [[Durallex Special Heavy Ferro-Fibrous]]. BV (2.0) = 958 <ref name ="RG31"/>
+
*; Re-Laser : Modern Harriers are a product of [[Julian Davion]] and [[Devlin Stone]]'s alliance, with the First Prince leaving behind schematics for the [[Laser | Re-engineered Laser]] when he passed through the Fortress Wall in [[3146]].<ref name = "RG31"/> The [[Republic of the Sphere]] would rush through production and deployment of the technology. The Re-Laser variant mounts a single [[ChisComp 87]] [[Large Re-Engineered Laser]], a [[Streak SRM-6]], and a medium laser.<ref name = "RG31"/> The single ton of Streak ammunition is protected by a CASE bin and the Standard armor is replaced by [[Durallex Special Heavy Ferro-Fibrous]]. BV (2.0) = 958<ref name ="RG31"/>
  
*; PPC: This variant replaces the Lasers with a [[PPC]]<ref name = "RG31R"/>. BV(2.0) = 859 <ref name = "RG31R"/>
+
*; PPC: This variant replaces the Lasers with a [[PPC]].<ref name = "RG31R"/> BV(2.0) = 859 <ref name = "RG31R"/>
  
 
<!--==Canonicity==
 
<!--==Canonicity==

Revision as of 22:01, 26 August 2023

This article is about the hover tank. For the troop transport, see Condor (DropShip class).
Harrier Hover Tank RGilClan v31.jpg
Harrier
Production information
Manufacturer Brooks Incorporated
Production Year 2794[1]
Mission Recon/BattleMech Support
Type Hovercraft
Technical specifications
Mass 50 tons
Armor Standard[2]
Engine Vlar 265 Fusion
Speed 162 km/h
Communications System Maxell 600b
Targeting Tracking System Maxell AT70
Armament
BV (2.0) 790


Description

The Harrier was initially commissioned by the SLDF in 2749 and was intended as a general-purpose support for BattleMech operations but would be more commonly used for cavalry and long-range reconnaissance.[3] As the Succession Wars ground on, the necessary scavenger habits of the Inner Sphere would strip many fusion powered tanks of their engines to provide spares for 'Mechs with the Harrier only escaping due to the rare Vlar 265 which was primarily used in the civilian sector. The Harrier would cease production after the Free Worlds League captured Carver V in the mid-thirtieth century and Ingrid Liao refused to rebuild the production line. The Harrier would return after the Drillson sparked a renaissance in fusion powered hovercraft. It would make a significant return after the Federated Commonwealth captured Carver V during the Fourth Succession War as part of the FedComm fusion revival program which would culminate in the Fulcrum and Condor.[3]

Armament

The Harrier has a large laser as its primary weapon, backed up by an SRM-6 launcher fed by one ton of ammunition. A single medium laser covers the rear arc of the vehicle.

Variants

  • PPC
    This variant replaces the Lasers with a PPC.[2] BV(2.0) = 859 [2]


Gallery

References

  1. MUL online date for the Harrier (Combat Vehicle)
  2. 2.0 2.1 2.2 Recognition Guide: ilClan, vol. 31, pp. 22–24
  3. 3.0 3.1 3.2 3.3 3.4 Recognition Guide: ilClan, vol. 31, pp. 6–7

Bibliography