Difference between revisions of "Predator (BattleMech)"
Sarna News
HussarZwei (talk | contribs) m |
m (tech base and mech type) |
||
| Line 7: | Line 7: | ||
|year reference=<ref>''[http://www.masterunitlist.info/Unit/Details/2567/ MUL online date for the ''{{PAGENAME}}'']''</ref> | |year reference=<ref>''[http://www.masterunitlist.info/Unit/Details/2567/ MUL online date for the ''{{PAGENAME}}'']''</ref> | ||
|model= PDR | |model= PDR | ||
| − | |||
|cost= 12,152,800 C-bills | |cost= 12,152,800 C-bills | ||
|mass=60 | |mass=60 | ||
| + | |Tech Base=Clan | ||
| + | |mech type=BattleMech | ||
|chassis=Process 3 Standard | |chassis=Process 3 Standard | ||
|armor=17-J Standard | |armor=17-J Standard | ||
| Line 44: | Line 45: | ||
*''[[Technical Readout: 3060]]'' | *''[[Technical Readout: 3060]]'' | ||
| − | |||
| − | |||
| − | |||
[[Category:Clan Blood Spirit BattleMechs]] | [[Category:Clan Blood Spirit BattleMechs]] | ||
[[Category:Clan Diamond Shark BattleMechs]] | [[Category:Clan Diamond Shark BattleMechs]] | ||
Revision as of 08:01, 8 May 2020
- This article is about the 'Mech design. For other uses, see Predator (disambiguation).
| |
| Predator | |
|---|---|
| Production information | |
| Manufacturer | Kindraa Faraday-Tanaga Tertiary Facility |
| Production Year | 3060[1] |
| Model | PDR |
| Class | Heavy |
| Cost | 12,152,800 C-bills |
| Technical specifications | |
| 'Mech type | Clan BattleMech |
| Mass | 60 tons |
| Chassis | Process 3 Standard |
| Armor | 17-J Standard |
| Engine | Dagda-Production Series A 300 XL |
| Communications System | KP-3 "Screamer" |
| Targeting Tracking System | Series VI TTS |
| Heat Sinks | 10 Double heat sinks |
| Speed | 86 km/h |
| Armament | |
| BV (1.0) | 1,592[2][3] |
| BV (2.0) | 1,754[4][5] |
Description
The Predator is a second-line BattleMech that is the product of a cooperative venture between the various Clan Fire Mandrill Kindraa. It is protected by eleven and a half tons of armor and can move at a respectable speed for a heavy 'Mech. Useful as either a medium-range duelist or as a close-up skirmisher, it can use its autocannons to deal a strong punch, then follow up with cluster rounds that exploit holes in an enemy 'Mech's armor.[5]
Weapons and Equipment
Roughly a third of the Predator's mass is consumed by two Faraday LB 10-X Autocannons. These have ample ammunition for most Clan Trials and usually stock both cluster and slug rounds. They are supported by a pair of Series 2FM ER Medium Lasers and paired Series 1 ER Small Lasers. Not only can the lasers keep the symmetrical design in the fight after its autocannon ammunition runs out, they do not create a burden on the 'Mech's ability to control heat under normal circumstances. Ten double heat sinks is all the Predator needs to keep its heat in check.[5]
Variants
- Predator 2
- Introduced during the Jihad era in 3075, the variant is a revision of its weaponry and armor. The 'Mech's armor has been replaced with Ferro-Fibrous armor for slightly increased protection. Its LB-X Class autocannons have been replaced by a pair of Class 20 Hyper Assault Gauss Rifles with 4 tons of ammunition split between the two torsos. While two ER Small Lasers have been retained, its ER Mediums have been exchanged for pair of Medium Pulse Lasers. BV (2.0) = 2,159[6]
References
- ↑ MUL online date for the Predator (BattleMech)
- ↑ Combat Operations, p. 110
- ↑ Record Sheets: 3060, p. 164
- ↑ Record Sheets: 3060 Unabridged, p. 250
- ↑ 5.0 5.1 5.2 Technical Readout: 3060, pp. 166-167, "Predator 'Mech Profile"
- ↑ Record Sheets: 3060 Unabridged p. 251, "Jihad era variant of the Predator".