Predator (BattleMech)
Sarna News
- HEXTECH Wave 9 Review - Winding Rivers, Tall Walls, and Underground Tunnels
- Hired Steel and Making MechWarrior 5: Clans Cinematics with Constantin & Bernhard of TMC
- Your BattleTech News Round-Up For December, 2024
- Community Outreach - Caterwauling On CamoSpecs With Matt "00Dawg" Frederiksen
- HEXTECH Wave 8 Review - Autumn Colors, Canyons, And Slums
- Read more →
- This article is about the 60-ton BattleMech. For other uses, see Predator.
Predator | |
---|---|
Production information | |
Manufacturer | Kindraa Faraday-Tanaga Tertiary Facility[1] |
Production Year | 3060[2] |
Model | PDR |
Class | Heavy |
Cost | 12,152,800 C-bills |
Technical specifications | |
'Mech type | Clan BattleMech |
Mass | 60 tons |
Chassis | Process 3 Standard |
Armor | 17-J Standard |
Engine | Dagda-Production Series A 300 XL |
Communications System | KP-3 "Screamer" |
Targeting Tracking System | Series VI TTS |
Heat Sinks | 10 Double heat sinks |
Speed | 86 km/h |
Armament | |
BV (1.0) | 1,592[3][4] |
BV (2.0) | 1,754[1][5] |
Contents
Description[edit]
The Predator is a second-line BattleMech that is the product of a cooperative venture between the various Clan Fire Mandrill Kindraa. It is protected by eleven and a half tons of armor and can move at a respectable speed for a heavy 'Mech. Useful as either a medium-range duelist or as a close-up skirmisher, it can use its autocannons to deal a strong punch, then follow up with cluster rounds that exploit holes in an enemy 'Mech's armor.[1]
Weapons and Equipment[edit]
Roughly a third of the Predator's mass is consumed by two Faraday LB 10-X Autocannons. These have ample ammunition for most Clan Trials and usually stock both cluster and slug rounds. They are supported by a pair of Series 2FM ER Medium Lasers and paired Series 1 ER Small Lasers. Not only can the lasers keep the symmetrical design in the fight after its autocannon ammunition runs out, they do not create a burden on the 'Mech's ability to control heat under normal circumstances. Ten double heat sinks is all the Predator needs to keep its heat in check.[1]
Variants[edit]
- Predator 2
- Introduced during the Jihad era in 3075, the variant is a revision of its weaponry and armor. The 'Mech's armor has been replaced with ferro-fibrous armor for slightly increased protection. Its LB-X Class autocannons have been replaced by a pair of Class 20 Hyper-Assault Gauss Rifles with 4 tons of ammunition split between the two torsos. While two ER Small Lasers have been retained, its ER Mediums have been exchanged for pair of Medium Pulse Lasers. BV (2.0) = 2,159[6]
Design Quirks[edit]
The Predator has the following Design Quirks:[7]
Notes[edit]
- In German products, the unit's proper Clan name was translated to Raubtier.
Gallery[edit]
Original Predator from TRO:3060
References[edit]
- ↑ 1.0 1.1 1.2 1.3 Technical Readout: 3060, pp. 166–167: "Predator"
- ↑ MUL online date for the Predator (BattleMech)
- ↑ Combat Operations, p. 110
- ↑ Record Sheets: 3060, p. 164
- ↑ Record Sheets: 3060 Unabridged, p. 250
- ↑ Record Sheets: 3060 Unabridged p. 251: "Jihad era variant of the Predator"
- ↑ BattleMech Manual, p. 94: BattleMech Quirk Table - Predator Entry