Incubus II

Revision as of 12:07, 25 February 2013 by Mbear (talk | contribs) (initial load of page content)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Incubus II
Production information
Manufacturer Csesztreg Industriplex Alpha[1]
Class Light
Technical specifications
Mass 30 tons
Chassis Model MH-26 Endo Steel[1]
Armor Compound H17 Ferro-Fibrous[1]
Engine 240 XL
Heat Sinks 10 Double Heat Sinks
Speed 129 km/h
Jump Jets Light Series Mk. II w/Partial Wing[1]
Armament

2 x ER Medium Pulse Lasers
1 x Laser AMS
1 x Light Active Probe[1]

BV (2.0) 1,261 ('Mech only)[2]


Description

The Incubus II BattleMech is a redesign of a staple second line Clan BattleMech, the Incubus. Clan Hell's Horses worked with Clan Wolf-in-Exile to develop the new machine. As the Exiled Wolves are providing the raw materials and the Horses the technical knowledge, the Wolves have been given right of first refusal for produced units.

The Hells' Horses scientists chose the Incubus as their target because it is so highly regarded by the Clans. By focusing on one of the strengths of the original design - speed - they settled on a development direction. The use of a smaller engine reduced the top speed slightly, but addtional jump jets allow the Incubus II to cover more ground in a jump. To further increase the distance traveled, the scientists have installed a Partial Wing. When in a standard atmosphere, the Incubus II can cover 330 meters in a single jump. The increased airflow through the heat sinks also improves the Incubus II's cooling system performance.

Armament

The Incubus II only has two torso-mounted ER Medium Pulse Lasers for offensive armament. A Laser AMS system was installed in the head to protect the pilot from missile attacks. The installation of more jump jets and the Partial Wing has reduced the available space for weaponry, but the Hell's Horses found an answer for that problem: They created several hand-held weapons systems that add additional firepower and provide commanders and pilots with some of the tactical flexibility of an OmniMech.

To date the following weapons packages have been observed:

  • Medium Chemical Laser weapon - Mounts twin Medium Chemical Lasers, a half ton of armor, and a half ton of ammunition. BV (2.0) = 93[2]
  • Streak LRM weapon - Mounts a Streak LRM-5, half ton of armor, and half ton of ammunition. BV(2.0)=108[2]
  • LRM weapon - Mounts a pair of LRM-5 launchers, a half ton of armor, and half a ton of ammunition. BV (2.0)=130[2]
  • Streak SRM weapon - Carries a single Streak SRM-4, half ton of armor, and half ton of ammunition BV (2.0)=100[2]
  • AP Gauss Rifle weapon - An anti-infantry/battlesuit weapon, this system carries triple AP Gauss Rifles, a ton of ammunition, and a half ton of armor for protection. BV(2.0)=82[2]
  • Machine Gun weapon - Another anti-infantry system, this weapon carries four Machine Guns, and the half ton of ammunition and armor common to all the Incubus II's handheld weapons systems. BV (2.0) = 37[2]
  • TAG weapon - This system carries a TAG system protected by a half-ton of armor. BV (2.0) = 16[2]

Variants

No variants have been observed.

References

  1. 1.0 1.1 1.2 1.3 1.4 Technical Readout: Prototypes, p. 142
  2. 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 Technical Readout: Prototypes, p. 143

Bibliography