Difference between revisions of "Orca"

m (reverted to last correct revision by Nuclear-Fridge)
Line 1: Line 1:
 
{{otheruses|the 'Mech|other uses|Orca (disambiguation)}}
 
{{otheruses|the 'Mech|other uses|Orca (disambiguation)}}
 
+
{{NotCanon}}
 
{{InfoBoxBattleMech
 
{{InfoBoxBattleMech
 
| image        = Orca.jpg
 
| image        = Orca.jpg
 
| name        = Orca
 
| name        = Orca
| manufacturer = Skobel MechWorks, Terra
+
| manufacturer = "Minnesota MechWorks"
| production year = 3091
+
| model        =  
| model        = OC-1X
+
| class        = "Dreadnaught"
| class        = Superheavy Mech
 
| Tech Base    = Inner Sphere (Experimental)
 
 
| cost        = ?
 
| cost        = ?
 
| mass        = 200
 
| mass        = 200
| chassis      = Wolverine Dreadnought Type X (Prototype Superheavy Chassis)
+
| chassis      = "Wolverine Dreadnought Type XX"
 
+
| armor        = "Bioforge Delta Zulu"
| armor        = Bioforge Delta Zulu with CASE II
+
| engine      = 400
| engine      = 400 XL
 
 
| speed        = 32.4
 
| speed        = 32.4
 
| armament=
 
| armament=
Line 25: Line 22:
 
* 1x Anti-personnel laser
 
* 1x Anti-personnel laser
 
| BV (1.0)    = ?
 
| BV (1.0)    = ?
| BV (2.0)    = 3,357
+
| BV (2.0)    = ?
 
}}
 
}}
  
 
==Description==
 
==Description==
 +
The '''''Orca''''' is a super-heavy [[BattleMech]] allegedly built and deployed by [[Clan Wolverine]], the not-named Clan.
 +
 +
==Canonicity==
 +
The '''Project Omega''' document was an [[w:April Fools|April Fools joke]] by [[Dave McCulloch]] and [[Warner Doles (person)|Warner Doles]] uploaded to the official classicbattletech.com site. Pertaining to be an official [[Technical Readout]]-style document within the [[BattleTech]] universe (a report within [[Word of Blake]]), it described the super-heavy ''Orca''-class BattleMech, complete with combat history and variants.
  
 +
Although clearly marked as non-canonical, the design gained notoriety among fans similar to the ''[[Gausszilla]]''. Within the document it was classified as a "Dreadnought"; 'Mechs massing above 100 tons are otherwise known as [[:Category:Colossal BattleMechs|Colossal]] or [[:Category:Superheavy BattleMechs|Superheavy]] 'Mechs.
  
==Canonicity==
+
The ''Orca'' name has been semi-canonized in Technical Readout: 3145 Republic of the Sphere, with the mention that prior to the development of the [[Poseidon (BattleMech)|''Poseidon'']] tripod super heavy 'Mech, the [[Republic of the Sphere]] built a prototype super heavy 'Mech named the ''Orca'' that heavily inspired the ''Poseidon''. Described as a lumbering biped derived from the [[Omega (BattleMech)|''Omega'']] that was mothballed after shortly after its prototype models were produced, the appearance and unit specifications of this Republic ''Orca'' prototype design are currently unknown.<ref name=TRO3145RotS-44>''Technical Readout: 3145 Republic of the Sphere'', p. 44 "PSD-V2 Poseidon"</ref>
The first appearance of '''Project Omega''' document was an [[w:April Fools|April Fools joke]] by [[Dave McCulloch]] and [[Warner Doles (person)|Warner Doles]] uploaded to the official classicbattletech.com site. Pertaining to be an official [[Technical Readout]]-style document within the [[BattleTech]] universe (a report within [[Word of Blake]]), it described the super-heavy ''Orca''-class BattleMech, complete with combat history and variants. The ''Orca'' name has been semi-canonized in Technical Readout: 3145 Republic of the Sphere, with the mention that prior to the development of the [[Poseidon (BattleMech)|''Poseidon'']] tripod super heavy 'Mech, the [[Republic of the Sphere]] built a prototype super heavy 'Mech named the ''Orca'' that heavily inspired the ''Poseidon''. Described as a lumbering biped derived from the [[Omega (BattleMech)|''Omega'']] that was mothballed after shortly after its prototype models were produced, the appearance and unit specifications of this Republic ''Orca'' prototype design are currently unknown.<ref name=TRO3145RotS-44>''Technical Readout: 3145 Republic of the Sphere'', p. 44 "PSD-V2 Poseidon"</ref>
 
The ''Orca'' has been fully-canonized in Experimental Technical Readout: Republic II.<ref name=XTRORepublicIIRotS-14-15>''Experimental Technical Readout: Republic II'', p. 14-15 "OC-1X Orca"</ref>
 
  
 
==Variants==
 
==Variants==
Line 39: Line 39:
 
*One variant exchanges the artillery piece for a quartet of rotary gauss guns, "deadly against light vehicles".
 
*One variant exchanges the artillery piece for a quartet of rotary gauss guns, "deadly against light vehicles".
 
*The other variant exchanges the artillery piece for two more ER PPCs plus heat sinks.
 
*The other variant exchanges the artillery piece for two more ER PPCs plus heat sinks.
 
===Design Quirks===
 
The ''Orca'' has the following [[Design Quirks]]
 
*[[Distracting]]
 
*[[Rumble Seat]]
 
*[[Difficult to Pilot]]
 
*[[Obsolete/3105]]
 
*[[Poor Performance]]
 
*[[Prototype]]
 
  
 
==References==
 
==References==
Line 55: Line 46:
 
*''[[Technical Readout: 3145]]''
 
*''[[Technical Readout: 3145]]''
 
*''[[Technical Readout: 3145 Republic of the Sphere]]''
 
*''[[Technical Readout: 3145 Republic of the Sphere]]''
*''[[Experimental Technical Readout: Republic II]]''
+
 
  
 
[[Category: Superheavy BattleMechs|Orca]]
 
[[Category: Superheavy BattleMechs|Orca]]
 
[[Category: 200 ton BattleMechs|Orca]]
 
[[Category: 200 ton BattleMechs|Orca]]
 +
[[Category:April Fools Products]]

Revision as of 20:52, 10 June 2015

This article is about the 'Mech. For other uses, see Orca (disambiguation).
Orca
Orca
Production information
Manufacturer "Minnesota MechWorks"
Class Superheavy
Cost ?
Technical specifications
Mass 200 tons
Chassis "Wolverine Dreadnought Type XX"
Armor "Bioforge Delta Zulu"
Engine 400
Speed 32.4 km/h
Armament
BV (1.0) ?
BV (2.0) ?


Description

The Orca is a super-heavy BattleMech allegedly built and deployed by Clan Wolverine, the not-named Clan.

Canonicity

The Project Omega document was an April Fools joke by Dave McCulloch and Warner Doles uploaded to the official classicbattletech.com site. Pertaining to be an official Technical Readout-style document within the BattleTech universe (a report within Word of Blake), it described the super-heavy Orca-class BattleMech, complete with combat history and variants.

Although clearly marked as non-canonical, the design gained notoriety among fans similar to the Gausszilla. Within the document it was classified as a "Dreadnought"; 'Mechs massing above 100 tons are otherwise known as Colossal or Superheavy 'Mechs.

The Orca name has been semi-canonized in Technical Readout: 3145 Republic of the Sphere, with the mention that prior to the development of the Poseidon tripod super heavy 'Mech, the Republic of the Sphere built a prototype super heavy 'Mech named the Orca that heavily inspired the Poseidon. Described as a lumbering biped derived from the Omega that was mothballed after shortly after its prototype models were produced, the appearance and unit specifications of this Republic Orca prototype design are currently unknown.[1]

Variants

The Orca as presented does not appear to be an Omni design.

  • One variant exchanges the artillery piece for a quartet of rotary gauss guns, "deadly against light vehicles".
  • The other variant exchanges the artillery piece for two more ER PPCs plus heat sinks.

References

  1. Technical Readout: 3145 Republic of the Sphere, p. 44 "PSD-V2 Poseidon"

Bibliography