Penetrator
Sarna News
| Penetrator | |
| Penetrator | |
|---|---|
| Production information | |
| Manufacturer | Kallon Industries |
| Model | PTR-4D |
| Class | Heavy |
| Technical specifications | |
| Mass | 75 tons |
| Chassis | Crucis G |
| Armor | Durallex Heavy |
| Engine | Vlar 300 |
| Speed | 64.8 km/h |
| Jump Jets | Anderson 398 |
| Armament | |
| BV (1.0) | 1,375 |
Description
The designers at Kallon Industries used the Black Hawk Clan OmniMech as the basis for the Penetrator. The Penetrator has an all energy weapons arsenal and uses twelve double heat sinks to handle the massive heat load from its weapons. The 'Mech is lacking in speed though when compared to the Black Hawk. This is because the 'Mechs designers used a Vlar 300 fusion engine for its combat durability, giving the 'Mech a top speed of 64.8 kph. To help offset the 'Mech's lack of mobility, the Penetrator has four Anderson 398 jump jets giving it added mobility with a jumping distance of one hundred and twenty meters. The Penetrator also carries a respectable thirteen tons of armor. The 'Mech's heavy armor protection, combined with its standard engine and near-non reliance on and limited amounts of ammunition, make for a 'Mech that is very rugged and hard to kill.
Armament
The Penetrator carries a blistering laser array. The primary weapons are a pair of arm mounted Diverse Optics Sunbeam ER Large Lasers for long range firepower. For close range combat, the 'Mech carries six Sutel Precision Line Medium Pulse Lasers which are mounted in its right and left torsos. Finally, the 'Mech carries its only ammunition based weapon, a Yori Flyswatter Anti-Missile System, for added defense against missile attacks.
Variants
- PTR-4F - Intended to act as a fire support 'Mech, The PTR-4F Penetrator sacrifices two of its Medium Pulse Lasers and the ER Large Lasers, freeing enough tonnage to add two LRM-10 missile launchers. The LRM-10s were then mated to Artemis IV fire control systems for added accuracy. BV (1.0) = 1,348
- PTR-6M - The 6M is a variant of the Penetrator that looks to alleviate the 'Mech's heat build up by removing two of the Medium Pulse Lasers and replacing them with five additional double heat sinks. BV (1.0) = 1,459
- PTR-6S - A simple modification of the Penetrator, the 6S model removes one and a half tons of armor. This frees enough weight to add a Guardian ECM Suite to the 'Mech, protecting the 'Mech from foes' advanced electronics. BV (1.0) = 1,391
- PTR-6T - The 6T variant of the Penetrator is a modification that replaces the six Medium Pulse Lasers with six ER Medium Lasers. The 'Mech then adds an advanced Targeting Computer, making its ER Large Lasers more accurate and making the ER Medium Lasers similar in accuracy to the Medium Pulse Lasers at longer ranges. The 'Mech has also had two additional double heat sinks added to help with the increased heat output. BV (1.0) = 1,643
Notable Pilots
- The Penetrator became the trademark 'Mech of AFFC officer Archer Christifori, who piloted one through the FedCom Civil War and Operation Bulldog. Originally a stock example, Christifori's 'Mech was eventually upgraded with salvaged Clan-tech ER Large Lasers.
- April 9, 3056, Kai Allard-Laio used a Penetrator in a solaris match teamed with Galen Cox in a brand new Crusader, also produced by Kallon Industries against a Skye Tigers team of Stalker and Goliath. The match was important both because of the defense of Kai's title as champion, but it was used as a political win in the ongoing conflict between Victor Steiner-Davion and Ryan Steiner of the Skye March. Though data is inconclusive, this is most likely the first combat usage of the new Penetrator Mech, and the Kai-Galen victory over heavier mechs showed the power of this newest design from Kallon. [1]
References
- ↑ name=Stackpole Stackpole, Michael A. (1993) Assumption of Risk. ROC Science Fiction Press. ISBN 0-451-45283-6