Anderson Propulsion (Jump Jets)
This article or section is in a state of significant expansion or restructuring. You are welcome to assist in its construction by editing it as well. If this article or section has not been edited in several days, please remove this template. If you are the editor who added this template and you are actively editing, please be sure to replace this template with {{in use}} during the active editing session. Click on the link for template parameters to use.
This article was last edited by Doneve (talk | contribs) 12 years ago. (Update timer) |
Contents
Description
Anderson Propulsion, often simply referred to as Anderson is the OEM designer of a family of Jump Jets. Models of Anderson jump jets are produced by several manufacturers in the Inner Sphere. Anderson is a well known and established name in jump technology.
Standard Jump Jets
Anderson Propulsion standard jump jet designs have been produced in a number of variants. The best known versions are listed below.
Model 12
The model 12 was designed for the FRB-2E Firebee and began production in 2524. Though unremarkable by current standards, the Model 12 allowed the 35 ton Firebee to bound 150 meters at a time, a substantial distance in the era. Production of this design halted when the factory that produced the Firebee was destroyed in the First Succession War.
Manufactured on | Manufactured by | Typicaly used in | References |
Exedor | Confederation Defense Corporation | FRB-2E Firebee | [1] |
Model 21
The second entry in the AP line of jump systems, the Model 21 was introduced during the Star League era on the Catapult and Shogun. The Model 21 was subject to a Star League Quartermaster recall in 2566 due to the design being subject to a conduit failure that vented thrust gasses into the `mech's interior spaces. The Anderson Model 25 was the designated replacement system though not all Catapults so equipped were upgraded.[2]
Manufactured on | Manufactured by | Typicaly used in | References |
Graham IV | Mitchell Vehicles | SHG-2F Shogun | [3] |
Corey | Hollis Incorporated | CPLT-C1 Catapult | [4] |
Model 25
Initially designed as a replacement for the recalled Model 21 for installation in the Catapult, the Model 25 was also installed in the Osprey, a niche product by Hollis Incorporated during the Star League era. Initial production of this model likely ceased in 2791 with the destruction of the Catapult production facility.[4] The Word of Blake however commissioned Skobel MechWorks and Achernar BattleMechs in recent years to produce the Osprey in massive numbers and as such this design has seen something of a renaissance. Of note however is that the Achernar complex was destroyed in battle with the Clan Wolf-in-Exile. Additionally, Hollis Incorporated, the original designer of the Osprey, has retooled a (presumably rebuilt) Catapult line to produce the OSP-15E. It seems that what was old is new again.
Manufactured on | Manufactured by | Typicaly used in | References |
Terra | Skobel MechWorks | OSP-26 Osprey | [5] |
Corey | Hollis Incorporated | OSP-15E Osprey | [5] |
Achernar | Achernar BattleMechs | OSP-26 Osprey | [5] |
Model 30
Fluff.
Manufactured on | Manufactured by | Typicaly used in | References |
Capella | Ceres Metals Industries | VND-1R Vindicator | [6] |
Capella | Ceres Metals Industries | VND-3L Vindicator | [7] |
St. Ives | Ceres Metals | PXH-4L Phoenix Hawk | [8] |
St. Ives | Ceres Metals Industries | PXH-5L Phoenix Hawk | [9] |
Capella | Ceres Metals Industries | SNK-1V Snake | [10] |
Model 398
Fluff.
Anderson 398 Capella Ceres Metals Industries
Anderson 398 Kathil General Motors
Anderson 398 Irian Irian BattleMechs Unlimited
Anderson 398 [] GLT-4L GUILLOTINE IS (Mech)
Anderson 398 [] PTR-4D PENETRATOR IS (Mech)
Anderson 398 [] Glt-3n Guillotine (Mech) IS
Manufactured on | Manufactured by | Typicaly used in | References |
Planet | Manufacturer | MCH-01 Mechtype | [11] |
Notes
† References unclear whether this factory produces or imports this equipment
References
- ↑ Technical Readout: 3075, p. 243, "Firebee Profile"
- ↑ Technical Readout 3025, p. 84
- ↑ Technical Readout: 3050 Upgrade, p. 97, "Shogun Profile"
- ↑ 4.0 4.1 Technical Readout: 3039, p. 146, "Catapult Profile"
- ↑ 5.0 5.1 5.2 Technical Readout: 3085, p. 86, "Osprey Profile"
- ↑ Technical Readout: 3039, p. 130, "Vindicator Profile"
- ↑ Technical Readout: 3050 Upgrade, p. 50, "Vindicator Profile"
- ↑ Technical Readout: Project Phoenix, p. 24, "Phoenix Hawk Profile"
- ↑ Technical Readout: 3085, p. 236, "Phoenix Hawk Profile"
- ↑ Technical Readout: 3055 Upgrade, p. 34, "Snake Profile"
- ↑ Example Reference, p. 1, "Placeholder references in new documents"