Difference between revisions of "Fennec"

m
m (copyedits, added MUL introduction dates)
Line 2: Line 2:
 
|image=Fennec.JPG
 
|image=Fennec.JPG
 
|name=Fennec
 
|name=Fennec
−
|manufacturer=[[Corean Enterprises]]
+
|manufacturer=[[Corean Enterprises]]<ref name="TRO:3085Sp28+">''Technical Readout: 3085 Supplemental'', pp. 28-29, "FEC-1CM Fennec"</ref>
 
|production year=3080
 
|production year=3080
−
|year reference=<ref>''[http://www.masterunitlist.info/Unit/Details/1036/ MUL online date for the ''{{PAGENAME}}'']''</ref>
+
|year reference=<ref name="MUL1">''[http://www.masterunitlist.info/Unit/Details/1036/ MUL online entry for the ''{{PAGENAME}}'']''</ref>
−
|model=FEC-1CM
+
|model=FEC-1CM<ref name="TRO:3085Sp28+"/>
−
|class=Medium
+
|class=Medium<ref name="TRO:3085Sp28+"/>
−
|cost=
+
|Tech Base=[[Inner Sphere]]<ref name="TRO:3085Sp28+"/>
 +
|cost=13,822,125 [[C-bill]]s<ref name="MUL1"/>
 
|mass=55
 
|mass=55
−
|chassis=[[Endo Steel|Corean Model AG47 Endo Steel]]
+
|chassis=[[Endo Steel|Corean Model AG47 Endo Steel]]<ref name="TRO:3085Sp28+"/>
−
|armor=[[Ferro-Fibrous|Kallon Unity Weave Ferro-Fibrous]]
+
|armor=[[Ferro-Fibrous|Kallon Unity Weave Ferro-Fibrous]]<ref name="TRO:3085Sp28+"/>
−
|engine=[[VOX 330 XL]]
+
|engine=[[VOX 330 XL]]<ref name="TRO:3085Sp28+"/>
−
|speed=97
+
|speed=97<ref name="TRO:3085Sp28+"/>
 
|speed with MASC=
 
|speed with MASC=
−
|jumpjets=None
+
|jumpjets=None<ref name="TRO:3085Sp28+"/>
−
|comsys = [[PCE-5X1 “Zapper” with C³ Master]]
+
|comsys = [[PCE-5X1 “Zapper” with C³ Master]]<ref name="TRO:3085Sp28+"/>
−
|T&T = [[Reginald Systems Co-Track Gamma]]
+
|T&T = [[Reginald Systems Co-Track Gamma]]<ref name="TRO:3085Sp28+"/>
−
|heat sinks=10 [[Double Heat Sinks]]
+
|heat sinks=10 [[Double Heat Sinks]]<ref name="TRO:3085Sp28+"/>
−
|armament= 2x [[PPC|PPCs]] <br/> 2x [[Medium Pulse Lasers]]
+
|armament=
 +
2x [[PPC|PPCs]]<ref name="TRO:3085Sp28+"/><br/>
 +
2x [[Medium Pulse Lasers]]<ref name="TRO:3085Sp28+"/>
 
|BV (1.0)=
 
|BV (1.0)=
−
|BV (2.0)=1,395<ref>''Technical Readout: 3085 Supplemental'', p. 29 - BV2 for ''Fennec''.</ref>
+
|BV (2.0)=1,395<ref name="TRO:3085Sp28+"/><ref name="MUL1"/>
 
}}  
 
}}  
  
−
==Description==
+
== Description ==
 +
The '''''Fennec''''' is a Medium Class BattleMech that was produced for the [[Federated Suns]] in early 3080s. The design was conceived to help address the [[AFFS]] need for lighter lance level Command 'Mechs. Corean Enterprises used components from the ''[[Legionnaire]]'' to help put the design into production at its plant on [[Augusta]]. [[Republic of the Sphere]] Intelligence reports suggested that early prototypes of the ''Fennec'' were deployed in [[3080]] by the [[Davion Assault Guard]] in a conflict with the [[Taurian Concordat]].<ref name="TRO:3085Sp28+"/>
  
−
The '''''Fennec''''' is a Medium Class BattleMech that was produced for the [[Federated Suns]] in early 3080s. The design was conceived to help address the [[AFFS]] need for lighter lance level Command 'Mechs. Corean Enterprises used components from the ''[[Legionnaire]]'' to help put the design into production at its plant on [[Augusta]]. [[Republic of the Sphere]] Intelligence reports suggested that early prototypes of the ''Fennec'' were deployed in [[3080]] by the [[Davion Assault Guard]] in a conflict with the [[Taurian Concordat]].
+
The 'Mech features a [[C3 Computer (Master)|C3 Master Computer]], which allows it to coordinate with other C3 lance mates.  9.5 tons of Kallon Unity Weave Ferro-Fibrous armor protect the 'Mechs advanced systems and XL Fusion Engine. MechWarriors piloting the 'Mech must be mindful of the significant heat produced by its weapons and engine, as the design has only ten [[double heat sinks]].<ref name="TRO:3085Sp28+"/>
  
−
The 'Mech features a [[C3 Computer (Master)|C3 Master Computer]], which allows it to coordinate with other C3 lance mates.  9.5 tons of Kallon Unity Weave Ferro-Fibrous armor protect the 'Mechs advanced systems and XL Fusion Engine. MechWarriors piloting the 'Mech must be mindful of the significant heat produced by its weapons and engine, as the design has only ten [[double heat sinks]].<ref>''Technical Readout: 3085 Supplemental'', p. 28-29 - Background information and specs info on the Fennec.</ref>
+
== Weapons and Equipment ==
 +
The 'Mechs long range weaponry consist of a pair of arm mounted Magna Hellstar PPCs, which are backed up by a pair of Medium Pulse Lasers for close combat.<ref name="TRO:3085Sp28+"/>
  
−
==Weapons and Equipment==
+
== Variants ==
−
The 'Mechs long range weaponry consist of a pair of arm mounted Magna Hellstar PPCs, which are backed up by a pair of Medium Pulse Lasers for close combat.<ref>''Technical Readout: 3085 Supplemental'', p. 28-29 - Weapons info.</ref>
+
*;FEC-3C : This variant of the ''Fennec'' developed in [[Introduction Year::3087]]<ref name="MUL2"/> uses a [[C3 Slave|C3 Slave Computer]] instead of employing the Master Computer. Designed as a companion for the ''Fennec's'' C3 Master variant, the 'Mech employs a pair of [[Light PPC]]s in place of the pulse lasers. To help alleviate heat issues, the 'Mech has been given two additional double heat sinks<ref name="TRO:3085Sp28+"/>. BV (2.0) = 1,551<ref>''Record Sheets: 3085 Unabridged - The Cutting Edge'', p. 121</ref><ref name="MUL2">''[http://www.masterunitlist.info/Unit/Details/1037/fennec-fec-3c/ MUL online entry for the Fennec FEC-3C variant]''</ref>
  
−
==Variants==
+
*;FEC-5CM : This ''Fennec'' [[Introduction Year::3133]]<ref name="MUL3"/> variant uses an [[XXL Engine]] and [[Endo Composite]] skeleton to save weight. The standard C3 Master computer has been replaced with a [[C3 Boosted Master]] computer. It carries a [[Large Re-engineered Laser]] and a Clan-spec ER Medium Laser in each arm. A Clan-built [[Light Active Probe]] allows the 'Mech to identify hidden enemies. Heat management is handled by eleven double heat sinks tied into a [[Radical Heat Sink System]]. BV (2.0) = 1,438<ref>''Record Sheets: 3145 New Tech, New Upgrades'', p. 125</ref><ref name="MUL3">''[http://www.masterunitlist.info/Unit/Details/6900/fennec-fec-5cm/ MUL online entry for the Fennec FEC-5CM variant]''</ref>
−
*;FEC-3C : This variant of the ''Fennec'' uses a [[C3 Slave|C3 Slave Computer]] instead of employing the Master Computer. Designed as a companion for the ''Fennec's'' C3 Master variant, the 'Mech employs a pair of [[Light PPC]]s in place of the pulse lasers. To help alleviate heat issues, the 'Mech has been given two additional double heat sinks.<ref>''Technical Readout: 3085 Supplemental'', p. 28 Variants - ''Fennec's'' C3 Variant.</ref> BV (2.0) = 1,551<ref>''Record Sheets: 3085 Unabridged - The Cutting Edge'', p. 121</ref>
 
  
−
*;FEC-5CM : This ''Fennec'' variant uses an [[XXL Engine]] and [[Endo Composite]] skeleton to save weight. The standard C3 Master computer has been replaced with a [[C3 Boosted Master]] computer. It carries a [[Large Re-engineered Laser]] and a Clan-spec ER Medium Laser in each arm. A Clan-built [[Light Active Probe]] allows the 'Mech to identify hidden enemies. Heat management is handled by eleven double heat sinks tied into a [[Radical Heat Sink System]]. BV (2.0) = 1,438<ref>''Record Sheets: 3145 New Tech, New Upgrades'', p. 125</ref>
+
== References ==
−
 
 
−
==References==
 
 
<references />
 
<references />
  
−
==Bibliography==
+
== Bibliography ==
−
*''[[Technical Readout: 3085 Supplemental]]''
+
* ''[[Master Unit List]]''
−
*''[[Record Sheets: 3085 Unabridged - The Cutting Edge]]''
+
* ''[[Record Sheets: 3085 Unabridged - The Cutting Edge]]''
−
*''[[Record Sheets: 3145 New Tech, New Upgrades]]''
+
* ''[[Record Sheets: 3145 New Tech, New Upgrades]]''
 +
* ''[[Technical Readout: 3085 Supplemental]]''
  
−
[[Category:BattleMechs|{{PAGENAME}}]]
+
[[Category:BattleMechs|Fennec]]
−
[[Category:Dark Age Mechs|{{PAGENAME}}]]
+
[[Category:Dark Age Mechs|Fennec]]
−
[[Category:55 ton BattleMechs|{{PAGENAME}}]]
+
[[Category:55 ton BattleMechs|Fennec]]
−
[[Category:Federated Suns BattleMechs|{{PAGENAME}}]]
+
[[Category:Federated Suns BattleMechs|Fennec]]
−
[[Category:C3 Master Equipped BattleMechs]]
+
[[Category:C3 Master Equipped BattleMechs|Fennec]]
−
[[Category:C3 Slave Equipped BattleMechs]]
+
[[Category:C3 Slave Equipped BattleMechs|Fennec]]
−
[[Category:C3 Equipped BattleMechs]]
+
[[Category:C3 Equipped BattleMechs|Fennec]]

Revision as of 09:33, 12 June 2016

Fennec
Fennec
Production information
Manufacturer Corean Enterprises[1]
Production Year 3080[2]
Model FEC-1CM[1]
Class Medium
Cost 13,822,125 C-bills[2]
Technical specifications
'Mech type Inner Sphere[1]
Mass 55 tons
Chassis Corean Model AG47 Endo Steel[1]
Armor Kallon Unity Weave Ferro-Fibrous[1]
Engine VOX 330 XL[1]
Communications System PCE-5X1 “Zapper” with C³ Master[1]
Targeting Tracking System Reginald Systems Co-Track Gamma[1]
Heat Sinks 10 Double Heat Sinks[1]
Speed 97[1] km/h
Jump Jets None[1]
Armament

2x PPCs[1]
2x Medium Pulse Lasers[1]

BV (2.0) 1,395[1][2]


Description

The Fennec is a Medium Class BattleMech that was produced for the Federated Suns in early 3080s. The design was conceived to help address the AFFS need for lighter lance level Command 'Mechs. Corean Enterprises used components from the Legionnaire to help put the design into production at its plant on Augusta. Republic of the Sphere Intelligence reports suggested that early prototypes of the Fennec were deployed in 3080 by the Davion Assault Guard in a conflict with the Taurian Concordat.[1]

The 'Mech features a C3 Master Computer, which allows it to coordinate with other C3 lance mates. 9.5 tons of Kallon Unity Weave Ferro-Fibrous armor protect the 'Mechs advanced systems and XL Fusion Engine. MechWarriors piloting the 'Mech must be mindful of the significant heat produced by its weapons and engine, as the design has only ten double heat sinks.[1]

Weapons and Equipment

The 'Mechs long range weaponry consist of a pair of arm mounted Magna Hellstar PPCs, which are backed up by a pair of Medium Pulse Lasers for close combat.[1]

Variants

  • FEC-3C 
    This variant of the Fennec developed in 3087[3] uses a C3 Slave Computer instead of employing the Master Computer. Designed as a companion for the Fennec's C3 Master variant, the 'Mech employs a pair of Light PPCs in place of the pulse lasers. To help alleviate heat issues, the 'Mech has been given two additional double heat sinks[1]. BV (2.0) = 1,551[4][3]

References

  1. ↑ 1.00 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 Technical Readout: 3085 Supplemental, pp. 28-29, "FEC-1CM Fennec"
  2. ↑ 2.0 2.1 2.2 MUL online entry for the Fennec
  3. ↑ 3.0 3.1 MUL online entry for the Fennec FEC-3C variant
  4. ↑ Record Sheets: 3085 Unabridged - The Cutting Edge, p. 121
  5. ↑ 5.0 5.1 MUL online entry for the Fennec FEC-5CM variant
  6. ↑ Record Sheets: 3145 New Tech, New Upgrades, p. 125

Bibliography

Retrieved from "https://www.sarna.net/wiki/index.php?title=Fennec&oldid=415950"