Predator (BattleMech)

Revision as of 03:13, 27 August 2020 by Phasis (talk | contribs) (added gallery)
This article is about the 'Mech design. For other uses, see Predator (disambiguation).
Predator (BattleMech)
Predator
Production information
Manufacturer Kindraa Faraday-Tanaga Tertiary Facility
Production Year 3060[1]
Model PDR
Class Heavy
Cost 12,152,800 C-bills
Technical specifications
'Mech type Clan BattleMech
Mass 60 tons
Chassis Process 3 Standard
Armor 17-J Standard
Engine Dagda-Production Series A 300 XL
Communications System KP-3 "Screamer"
Targeting Tracking System Series VI TTS
Heat Sinks 10 Double heat sinks
Speed 86 km/h
Armament
BV (1.0) 1,592[2][3]
BV (2.0) 1,754[4][5]


Description

The Predator is a second-line BattleMech that is the product of a cooperative venture between the various Clan Fire Mandrill Kindraa. It is protected by eleven and a half tons of armor and can move at a respectable speed for a heavy 'Mech. Useful as either a medium-range duelist or as a close-up skirmisher, it can use its autocannons to deal a strong punch, then follow up with cluster rounds that exploit holes in an enemy 'Mech's armor.[5]

Weapons and Equipment

Roughly a third of the Predator's mass is consumed by two Faraday LB 10-X Autocannons. These have ample ammunition for most Clan Trials and usually stock both cluster and slug rounds. They are supported by a pair of Series 2FM ER Medium Lasers and paired Series 1 ER Small Lasers. Not only can the lasers keep the symmetrical design in the fight after its autocannon ammunition runs out, they do not create a burden on the 'Mech's ability to control heat under normal circumstances. Ten double heat sinks is all the Predator needs to keep its heat in check.[5]

Variants

  • Predator
    Introduced during the Jihad era in 3075, the variant is a revision of its weaponry and armor. The 'Mech's armor has been replaced with Ferro-Fibrous armor for slightly increased protection. Its LB-X Class autocannons have been replaced by a pair of Class 20 Hyper Assault Gauss Rifles with 4 tons of ammunition split between the two torsos. While two ER Small Lasers have been retained, its ER Mediums have been exchanged for pair of Medium Pulse Lasers. BV (2.0) = 2,159[6]

Notes

In German products the unit's proper Clan name was perfectly translated to Raubtier.

Gallery

References

  1. MUL online date for the Predator (BattleMech)
  2. Combat Operations, p. 110
  3. Record Sheets: 3060, p. 164
  4. Record Sheets: 3060 Unabridged, p. 250
  5. 5.0 5.1 5.2 Technical Readout: 3060, pp. 166-167, "Predator 'Mech Profile"
  6. Record Sheets: 3060 Unabridged p. 251, "Jihad era variant of the Predator".

Bibliography