Difference between revisions of "Enforcer III"

m (→‎Design Quirks: Battlefist -> Battlefists)
 
(32 intermediate revisions by 11 users not shown)
Line 1: Line 1:
−
{{Update Needed|[[Technical Readout: 3150]]}}
 
 
{{InfoBoxBattleMech
 
{{InfoBoxBattleMech
−
|image=EnforcerIII.jpg
+
|image = EnforcerIII.jpg
−
|name=Enforcer III
+
|name = ''Enforcer III''
−
|manufacturer=[[Achernar BattleMechs]]<ref name=TRO:3060>''Technical Readout: 3060'', pp. 95-96, "Enforcer III Profile"</ref><ref name=ofs12>''Objectives: Federated Suns'', p. 18</ref><br>[[Kallon Industries|Kallon Weapon Industries]]<ref name=TRO:3060/>
+
|manufacturer =  
−
|production year=3059
+
[[Achernar BattleMechs]]<ref name=TRCIp122f>''Technical Readout: Clan Invasion'', pp. 122–123: "Enforcer III"</ref> <!-- reprinted from TRO:3060 -->
−
|year reference=<ref>''[http://www.masterunitlist.info/Unit/Details/982/ MUL online date for the ''{{PAGENAME}}'']''</ref>
+
----
−
|model=ENF-6M
+
[[Kallon Industries|Kallon Weapon Industries]]<ref name=TRCIp122f />
−
|class=Medium
+
|production year = 3059
−
|cost= 8,685,875 C-bills
+
|year reference = <ref>''[http://www.masterunitlist.info/Unit/Details/982/ MUL online date for the ''{{PAGENAME}}'']''</ref>
−
|mass=50
+
|model = ENF-6M<ref name=TRCIp122f />
−
|chassis=Dorwinion Standard-Alpha [[Endo Steel]]
+
|cost = 8,685,875 [[C-bill]]s
−
|armor=StarGuard CIV
+
|Tech Base = Inner Sphere
−
|engine=[[Magna 250 XL]]
+
|mech type = BattleMech
−
|comsys=[[Achernar Electronics HICS-12]]
+
|mass = 50
−
|T&T=[[Federated Hunter]]
+
|feet = biped
−
|heat sinks=12 [[Double Heat Sinks]]
+
|chassis = [[Dorwinion Standard-Alpha]] <nowiki>[</nowiki>[[endo steel]]<nowiki>]</nowiki> <!-- <ref name=TRCIp122f /> -->
−
|speed=86.4
+
|armor = [[StarGuard CIV Standard]] <!-- <ref name=TRCIp122f /> -->
−
|jumpjets=McCloud Specials
+
|engine = [[Magna 250 XL]] <!-- <ref name=TRCIp122f /> -->
−
|armament=
+
|comsys = [[Achernar Electronic HICS-12]] <!-- <ref name=TRCIp122f /> -->
−
*1x [[ER Large Laser]]
+
|T&T = [[Federated Hunter]] <!-- <ref name=TRCIp122f /> -->
−
*1x [[ER Small Laser]]
+
|heat sinks = 12 [[double heat sink|double]] <!-- <ref name=TRCIp122f /> -->
−
*1x [[Ultra Autocannon/10]]
+
|speed = 86 <!-- <ref name=TRCIp122f /> -->
−
|BV (1.0)=1,427<ref name=CO>''Combat Operations'', p. 127</ref><ref>''Record Sheets: 3060'', p. 127</ref>
+
|jumpjets = [[McCloud Specials]] <!-- <ref name=TRCIp122f /> -->
−
|BV (2.0)=1,460<ref name=TRO:3060/><ref>''Record Sheets: 3060 Unabridged'', p. 136</ref>
+
|armament = <!-- <ref name=TRCIp122f /> -->
 +
* 1x [[ER large laser]]
 +
* 1x [[ER small laser]]
 +
* 1x [[Ultra AC/10]]
 +
|BV (1.0) = 1,427<ref name=COp127>''Combat Operations'', p. 127</ref><ref>''Record Sheets: 3060'', p. 127</ref>
 +
|BV (2.0) = 1,460<ref name=TRCIp122f /><ref>''Record Sheets: 3060 Unabridged'', p. 136</ref>
 
}}  
 
}}  
  
 
==Description==
 
==Description==
−
Traditionally seen as a [[House Davion|Davion]] [[BattleMech]], the ''[[Enforcer]]'' was commissioned to be redesigned by then [[First Prince]] [[Victor Steiner-Davion]] in an effort to rebuild his image within the sundered [[Federated Commonwealth]]. While not completely successful in the latter goal, the ''Enforcer III'' does succeed in bringing a classic 'Mech up to a more modern standard. The '''''Enforcer III''''' is built on a Dorwinion Standard-Alpha [[Endo Steel]] chassis that weighs half as much as a comparable standard chassis. Further weight savings were achieved through the use of a powerful Magna 250 [[XL Engine]] that gives the 'Mech a top speed of 86.4 km/h, which is complemented by five McCloud Specials jump jets, granting it a jumping capability of one hundred and fifty meters. The ''Enforcer III'' is armored with ten tons of StarGuard CIV armor that gives it good armor protection.<ref name=TRO:3060/>
+
Traditionally seen as a [[House Davion|Davion]] [[BattleMech]], the ''[[Enforcer]]'' was commissioned to be redesigned by then [[First Prince]] [[Victor Steiner-Davion]] in an effort to rebuild his image within the sundered [[Federated Commonwealth]]. While not completely successful in the latter goal, the '''''Enforcer III''''' does succeed in bringing a classic 'Mech up to a more modern standard.<ref name=TRO3060p95f>''Technical Readout: 3060'', pp. 95-96, "Enforcer III Profile"</ref>
  
−
After the [[Jihad]] ended, production of the ''Enforcer III'' was limited to Achenar's [[New Avalon]] production line.<ref name=ofs12/>
+
After the [[Jihad]] ended, production of the ''Enforcer III'' was limited to Achenar's [[New Avalon]] production line.<ref name=ofs12>''Objectives: Federated Suns'', p. 18</ref>
  
 
==Weapons and Equipment==
 
==Weapons and Equipment==
−
The ''Enforcer III'' carries as its primary weapon a Mydron Excel Ultra Type 10 [[Ultra Autocannon/10]] that can put twice as much firepower on a target as a standard autocannon of the same class and can keep up a barrage at its maximum firing rate for over a minute and a half. The Ultra Autocannon is backed up by a BlazeFire Sweetshot [[ER Large Laser]] and a Chiscomp 2000 [[ER Small Laser]]. This balanced mix of weapons makes the ''Enforcer III'' a powerful medium 'Mech. Additionally, due to the 'Mechs similarities to the original ''[[Enforcer]]'', the ''Enforcer III'' has become a direct replacement for destroyed ''Enforcers'' in many units.<ref name=TRO:3060/>
+
The ''Enforcer III'' is built on a [[Dorwinion Standard-Alpha]] [[endo steel]] chassis that weighs half as much as a comparable standard chassis. Further weight savings were achieved through the use of a powerful [[Magna 250]] [[XL engine]] that gives the 'Mech a top speed of 86.4 km/h, which is complemented by five [[McCloud Specials]] [[jump jet]]s, granting it a jumping capability of 150 meters. The ''Enforcer III'' is armored with 10 tons of [[StarGuard CIV]] armor that gives it good armor protection.<ref name=TRO3060p95f/>
 +
 
 +
The ''Enforcer III'' carries as its primary weapon a [[Ultra_AC/10#Mydron_Excel|Mydron Excel]] [[UAC/10]] that can put twice as much firepower on a target as a standard autocannon of the same class, and can keep up a barrage at its maximum firing rate for over a minute and a half. The autocannon is backed up by a [[BlazeFire Sweetshot]] [[ER large laser]] and a [[ChisComp 2000]] [[ER small laser]]. This balanced mix of weapons makes the ''Enforcer III'' a powerful medium 'Mech. Additionally, due to the 'Mech's similarities to the original ''[[Enforcer]]'', the ''Enforcer III'' has become a direct replacement for destroyed ''Enforcer''s in many units.<ref name=TRO3060p95f/>
  
 
==Variants==
 
==Variants==
−
*;ENF-6Ma : This field refit was introduced during the [[FedCom Civil War]]. It simply replaces the Ultra Autocannon/10 with a standard [[Autocannon/10]]. The dropoff in rate of fire is offset by the ability to use [[Precision Ammunition]]. BV (2.0) = 1,275<ref>''Record Sheets: 3085 Unabridged — Old is the New New'', p. 78</ref>
+
*; ENF-6G : Proposed at the same time as the 6T but not seeing the light of day until shortages of [[targeting computer]]s during the [[FedCom Civil War]], the space reserved for the targeting computer is devoted to a bevy of lasers, restoring the [[ER small laser]], adding two extra [[ER medium laser]]s and a single [[medium pulse laser]].<ref name=TRCIp122f /><ref name=TRO:3050Up56/> BV (1.0) ??, BV (2.0) = 1,858<ref>''Record Sheets: 3060 Unabridged'', p. 137</ref>
  
−
*;ENF-6T : A field refit turned factory variant of the ''Enforcer III'', the 6T model removes the Autocannon, ER Large Laser and ER Small Laser in favor of a powerful Poland [[Gauss Rifle]] for sniping and an [[Diverse Optics]] [[ER Medium Laser]] for close combat. The weapons on the ''Enforcer III'' are all linked to an advanced [[Targeting Computer]] that gives the 6T model incredible accuracy. Spare weight and space allows the factory built 6T to mount a hand on the left arm as well as an extra half ton of armor. BV (1.0) = 1,614<ref name=CO/>, BV (2.0) = 1,720 <ref name=TRO:3050U>''Technical Readout: 3050 Upgrade'', p. 56</ref>
+
*; ENF-6H : A variant based off the 6T, the 6H mounts a mammoth [[Mydron (UAC/20)|Mydron]] [[UAC/20]] in place of the [[Gauss rifle]].<ref name=TRCIp122f /><ref name=TRO:3050Up56/> BV (2.0) = 1,603<ref>''Record Sheets: 3060 Unabridged'', p. 138</ref>
  
−
*;ENF-6G : Proposed at the same time as a 6T but not seeing the light of day until shortages of targeting computers during the [[FedCom Civil War]], the space reserved for the targeting computer is devoted to a bevy of lasers, re-adding the ER small laser, adding two extra ER mediums and a single [[Medium Pulse Laser]]. <ref name=TRO:3050U/>BV (1.0) ??, BV (2.0) = 1,858<ref>''Record Sheets: 3060 Unabridged'', p. 137</ref>
+
*; ENF-6Ma : This field refit was introduced during the [[FedCom Civil War]]. It simply replaces the [[UAC/10]] with a standard [[AC/10]]. The drop-off in rate of fire is offset by the ability to use [[precision ammunition]].<ref name=TRCIp122f /> BV (2.0) = 1,275<ref>''Record Sheets: 3085 Unabridged — Old is the New New'', p. 78</ref>
  
−
*;ENF-6H : A variant based off the 6T, the 6H mounts a mammoth Mydron [[Ultra Autocannon/20]] in place of the gauss rifle. <ref name=TRO:3050U/>BV (1.0) = ??, BV (2.0) = 1,603<ref>''Record Sheets: 3060 Unabridged'', p. 138</ref>
+
*; ENF-6NAIS : An [[3074]] [[Technology Rating|advanced tech]] variant developed during the [[Jihad]] by [[NAIS]]. The [[standard armor]] is switched for weight-saving [[light ferro-fibrous]], which slightly reduced the 'Mech's armor protection. The 'Mech has 12 [[double heat sink]]s, to cope with 'Mechs advanced weaponry: a [[snub-nose PPC]], a [[large variable speed pulse laser]], and [[ER small laser]] make up the 'Mech arensal. To improve accuracy it has been given a [[targeting computer]] and [[C3 slave unit]].<ref name=TRCIp122f /> BV (2.0) = 1,475<ref>''Record Sheets: 3060 Unabridged'', p. 139 - NAIS variant of the ''Enforcer III'' introduced during the Jihad.</ref><ref>[http://masterunitlist.info/Unit/Details/984/enforcer-iii-enf-6nais MUL Profile of the Enforcer III ENF-6NAIS - Includes; Introduction Year, BV2, and Alpha Strike Data Card.]</ref>
  
−
*;ENF-6NAIS : An [[Technology Rating|advanced tech]] variant developed during the [[Jihad]] by [[NAIS]]. The standard armor is switched for [[Light Ferro-Fibrous]], which slightly reduced the 'Mech's armor protection. The 'Mech has 12 Double Heat Sinks, to cope with 'Mechs advanced weaponry. A [[Snub-Nose PPC]], a [[Large Variable Speed Pulse Laser]], and ER Small Laser make up the 'Mech arensal. To improve accuracy it has been given a Targeting Computer and [[C3 Slave Unit|C3 Slave Computer]]. BV (2.0) = 1,475<ref>''Record Sheets: 3060 Unabridged'', p. 139 - NAIS variant of the ''Enforcer III'' introduced during the Jihad.</ref>
+
*; ENF-6R : This [[Dark Age]] variant uses a [[rotary autocannon]].<ref>''Technical Readout: 3150'', p. 223</ref>
  
−
*;ENF-7C3BS : This version replaces the Ultra Autocannon/10 of the original with a [[Heavy PPC]] and an [[Experimental Technology|experimental]] [[C3 Boosted Slave]]. The Heavy PPC is supported by an ER Medium Laser and a Medium Pulse Laser. This variant can also jump 150 meters and carries a [[Targeting Computer]]. BV (2.0) = 1,687<ref>''Record Sheets: 3085 Unabridged — Old is the New New'', p. 79</ref>
+
*; ENF-6T : A field refit turned factory variant of the ''Enforcer III'', the 6T model removes the [[AC/10]], [[ER large laser]], and [[ER small laser]] in favor of a powerful [[Gauss rifle]] for sniping and an [[Diverse Optics (ERML)|Diverse Optics]] [[ER medium laser]] for close combat. The weapons on the are all linked to an advanced [[targeting computer]] that gives the 6T model incredible accuracy.<ref name=TRCIp122f /> Spare weight and space allows the factory built 6T to mount a hand on the left arm as well as an extra half ton of armor. BV (1.0) = 1,614<ref name=COp127/>, BV (2.0) = 1,720 <ref name=TRO:3050Up56>''Technical Readout: 3050 Upgrade'', p. 56</ref>
  
−
*;ENF-7D : This variant was introduced in [[3104]] after the [[Victoria War]]. Protected by nine and a half tons of [[Light Ferro-Fibrous]] armor, the most dramatic change is the use of a [[Torso-Mounted Cockpit]] to increase pilot survival. This version of the '''Enforcer III'' carries an [[LB 10-X]] in the right arm and an [[ER PPC]] in the left arm. Two tons of ammunition are provided and protected by a [[CASE II]] system. For anti-infantry work, it carries a [[Small Pulse Laser]]. Ground speed and jump capability are identical to those of the standard ''Enforcer III''. BV (2.0) = 1,495<ref name=XTRO:RV1p7>''Experimental Technical Readout: Republic, Volume 1'', p. 7</ref>
+
*; ENF-7C3BS : This [[3075]] version replaces the [[UAC/10]] of the original with a [[heavy PPC]] and an [[Experimental Technology|experimental]] [[C3 boosted slave]]. The heavy PPC is supported by an [[ER medium laser]] and a [[medium pulse laser]]. This variant can also jump 150 meters and carries a [[targeting computer]]. BV (2.0) = 1,687<ref>''Record Sheets: 3085 Unabridged — Old is the New New'', p. 79</ref><ref>[http://masterunitlist.info/Unit/Details/986/enforcer-iii-enf-7c3bs MUL Profile for the Enforcer III ENF-7C3BS - Includes; Introduction Year, BV2, and Alpha Strike Data Card.]</ref>
  
−
*;ENF-7X MUSE COMPACT : Developed on [[New Avalon]] during the [[Word of Blake]] attacks, the MUSE COMPACT project was an attempt to study ways of returning battlefield salvage to action. Their test-bed configuration was the ENF-7X. This ''Enforcer III'' variant uses several [[Clan]]-produced components, including the [[Endo Steel]] skeleton, [[Ferro-Fibrous]] armor, [[XL Engine]], and [[double heat sinks]].<ref name=XTRO:Dp4>''Experimental Technical Readout: Davion'', p. 4</ref> All the existing armament was removed and replaced by an [[Experimental Technology|experimental]] [[Binary Laser Cannon]] in each arm. The ''Enforcer III'' MUSE COMPACT retains the standard ground performance of the ''Enforcer III'' but adds [[Improved Jump Jets]] to improve jumping abilities. An [[XL Gyro]] provides the weight savings needed to mount this equipment. During the Jihad, the House Davion's Department of Military Communications and Research was trying to find a way to create a production version of this prototype. BV (2.0) = 1,670<ref name=XTRO:Dp4/>
+
*; ENF-7D : This variant was introduced in [[3104]] after the [[Victoria War]]. Protected by nine and a half tons of [[light ferro-fibrous]] armor, the most dramatic change is the use of a [[torso-mounted cockpit]] to increase pilot survival. This variant is armed with an [[LB 10-X]] in the right arm fed by two tons of [[CASE II]]-protected ammunition, an [[ER PPC]] in the left arm, and a [[small pulse laser]] for anti-infantry work. Ground speed and jump capability are identical to those of the standard ''Enforcer III''. BV (2.0) = 1,495<ref name=XTRO:RV1p7>''Experimental Technical Readout: Republic, Volume 1'', p. 7</ref>
  
−
==Design Quirks==
+
*; ENF-7X MUSE COMPACT : Developed on [[New Avalon]] during the [[Word of Blake]] attacks, the MUSE COMPACT project was an attempt to study ways of returning battlefield salvage to action, their testbed configuration was the ENF-7X. This variant uses several [[Clan]]-produced components, including the [[endo steel]] skeleton, [[ferro-fibrous]] armor, [[XL engine]], and [[double heat sink]]s.<ref name=XTRO:Dp4>''Experimental Technical Readout: Davion'', p. 4</ref> All the existing armament was removed and replaced by an [[Experimental Technology|experimental]] [[Binary laser cannon]] in each arm. The ''Enforcer III'' MUSE COMPACT retains the standard ground performance of the ''Enforcer III'' but adds [[improved jump jet]]s to improve jumping abilities. An [[XL gyro]] provides the weight savings needed to mount this equipment. During the Jihad, the House Davion's Department of Military Communications and Research was trying to find a way to create a production version of this prototype. BV (2.0) = 1,670<ref name=XTRO:Dp4/>
−
The ''''ENF-7D Enforcer III''' is subject to the following [[Design Quirks]]:<ref name=XTRO:RV1p7/>
+
 
 +
== Design Quirks ==
 +
The ''Enforcer III'' is subject to the following [[Design Quirks]]:<ref>[[BattleMech Manual]], p. 91 Design Quirk Table - Enforcer III.</ref>
 +
* [[Barrel Fist|Barrel Fist (LA/RA)]]
 +
* [[Fast Reload|Fast Reload (UAC/10)]]
 +
 
 +
The ENF-7D ''Enforcer III'' is subject to the following [[Design Quirks]]:<ref name=XTRO:RV1p7/>
 
* [[Battlefists]]
 
* [[Battlefists]]
 
* [[Command BattleMech]]
 
* [[Command BattleMech]]
Line 61: Line 73:
 
* [[Arthur Steiner-Davion]] piloted an ''Enforcer III'' during an attack by the [[Black Dragons]] on [[Robinson]] in [[3062]].
 
* [[Arthur Steiner-Davion]] piloted an ''Enforcer III'' during an attack by the [[Black Dragons]] on [[Robinson]] in [[3062]].
  
−
==Mech Gallery==
+
==Notes==
 +
* In German products, the unit's proper name was translated to '''Vollstrecker III'''. The model code was accordingly changed to '''VOL-6M'''.
 +
 
 +
==Gallery==
 
<gallery>
 
<gallery>
−
Image:Enforcer III Muse.jpg|''ENF-7X Enforcer III'' MUSE COMPACT
+
File:EnforcerIII.jpg|Original ''Enforcer III'' from ''[[Technical Readout: 3060|TRO:3060]]''
 +
Image:Enforcer III Muse.jpg|Experimental ENF-7X ''Enforcer III'' "MUSE COMPACT" from ''[[Experimental Technical Readout: Davion|XTRO:Davion]]''
 +
Image:ENF-7D Enforcer III.jpg|Experimental ENF-7D ''Enforcer III'' from ''[[Experimental Technical Readout: Republic, Volume 1|XTRO:Republic I]]''
 
</gallery>
 
</gallery>
  
Line 70: Line 87:
  
 
==Bibliography==
 
==Bibliography==
 +
<div class="desktop-3-col">
 +
*''[[BattleMech Manual]]''
 
*''[[Experimental Technical Readout: Davion]]''
 
*''[[Experimental Technical Readout: Davion]]''
 
*''[[Experimental Technical Readout: Republic, Volume 1]]''
 
*''[[Experimental Technical Readout: Republic, Volume 1]]''
Line 79: Line 98:
 
*''[[Technical Readout: 3050 Upgrade]]''
 
*''[[Technical Readout: 3050 Upgrade]]''
 
*''[[Technical Readout: 3060]]''
 
*''[[Technical Readout: 3060]]''
 +
*''[[Technical Readout: 3150]]''
 +
</div>
  
−
[[Category:BattleMechs|Enforcer III]]
+
[[Category:'Mechs]]
−
[[Category:Medium BattleMechs]]
+
[[Category:Boosted C3 Equipped BattleMechs]]
−
[[Category:50 ton BattleMechs]]
 
 
[[Category:Federated Suns BattleMechs]]
 
[[Category:Federated Suns BattleMechs]]
−
 
+
[[Category:German renamed units]]
−
[[Category:BattleMechs]]
 

Latest revision as of 18:03, 29 February 2024

Enforcer III
Enforcer III
Production information
Manufacturer Achernar BattleMechs[1]

Kallon Weapon Industries[1]

Production Year 3059[2]
Model ENF-6M[1]
Class Medium
Cost 8,685,875 C-bills
Technical specifications
'Mech type Inner Sphere BattleMech
Mass 50 tons
Chassis Dorwinion Standard-Alpha [endo steel]
Armor StarGuard CIV Standard
Engine Magna 250 XL
Communications System Achernar Electronic HICS-12
Targeting Tracking System Federated Hunter
Heat Sinks 12 double
Speed 86 km/h
Jump Jets McCloud Specials
Armament
BV (1.0) 1,427[3][4]
BV (2.0) 1,460[1][5]


Description[edit]

Traditionally seen as a Davion BattleMech, the Enforcer was commissioned to be redesigned by then First Prince Victor Steiner-Davion in an effort to rebuild his image within the sundered Federated Commonwealth. While not completely successful in the latter goal, the Enforcer III does succeed in bringing a classic 'Mech up to a more modern standard.[6]

After the Jihad ended, production of the Enforcer III was limited to Achenar's New Avalon production line.[7]

Weapons and Equipment[edit]

The Enforcer III is built on a Dorwinion Standard-Alpha endo steel chassis that weighs half as much as a comparable standard chassis. Further weight savings were achieved through the use of a powerful Magna 250 XL engine that gives the 'Mech a top speed of 86.4 km/h, which is complemented by five McCloud Specials jump jets, granting it a jumping capability of 150 meters. The Enforcer III is armored with 10 tons of StarGuard CIV armor that gives it good armor protection.[6]

The Enforcer III carries as its primary weapon a Mydron Excel UAC/10 that can put twice as much firepower on a target as a standard autocannon of the same class, and can keep up a barrage at its maximum firing rate for over a minute and a half. The autocannon is backed up by a BlazeFire Sweetshot ER large laser and a ChisComp 2000 ER small laser. This balanced mix of weapons makes the Enforcer III a powerful medium 'Mech. Additionally, due to the 'Mech's similarities to the original Enforcer, the Enforcer III has become a direct replacement for destroyed Enforcers in many units.[6]

Variants[edit]

  • ENF-6T 
    A field refit turned factory variant of the Enforcer III, the 6T model removes the AC/10, ER large laser, and ER small laser in favor of a powerful Gauss rifle for sniping and an Diverse Optics ER medium laser for close combat. The weapons on the are all linked to an advanced targeting computer that gives the 6T model incredible accuracy.[1] Spare weight and space allows the factory built 6T to mount a hand on the left arm as well as an extra half ton of armor. BV (1.0) = 1,614[3], BV (2.0) = 1,720 [8]
  • ENF-7D 
    This variant was introduced in 3104 after the Victoria War. Protected by nine and a half tons of light ferro-fibrous armor, the most dramatic change is the use of a torso-mounted cockpit to increase pilot survival. This variant is armed with an LB 10-X in the right arm fed by two tons of CASE II-protected ammunition, an ER PPC in the left arm, and a small pulse laser for anti-infantry work. Ground speed and jump capability are identical to those of the standard Enforcer III. BV (2.0) = 1,495[17]
  • ENF-7X MUSE COMPACT 
    Developed on New Avalon during the Word of Blake attacks, the MUSE COMPACT project was an attempt to study ways of returning battlefield salvage to action, their testbed configuration was the ENF-7X. This variant uses several Clan-produced components, including the endo steel skeleton, ferro-fibrous armor, XL engine, and double heat sinks.[18] All the existing armament was removed and replaced by an experimental Binary laser cannon in each arm. The Enforcer III MUSE COMPACT retains the standard ground performance of the Enforcer III but adds improved jump jets to improve jumping abilities. An XL gyro provides the weight savings needed to mount this equipment. During the Jihad, the House Davion's Department of Military Communications and Research was trying to find a way to create a production version of this prototype. BV (2.0) = 1,670[18]

Design Quirks[edit]

The Enforcer III is subject to the following Design Quirks:[19]

The ENF-7D Enforcer III is subject to the following Design Quirks:[17]

Notable Pilots[edit]

Notes[edit]

  • In German products, the unit's proper name was translated to Vollstrecker III. The model code was accordingly changed to VOL-6M.

Gallery[edit]

References[edit]

  1. ↑ 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 Technical Readout: Clan Invasion, pp. 122–123: "Enforcer III"
  2. ↑ MUL online date for the Enforcer III
  3. ↑ 3.0 3.1 Combat Operations, p. 127
  4. ↑ Record Sheets: 3060, p. 127
  5. ↑ Record Sheets: 3060 Unabridged, p. 136
  6. ↑ 6.0 6.1 6.2 Technical Readout: 3060, pp. 95-96, "Enforcer III Profile"
  7. ↑ Objectives: Federated Suns, p. 18
  8. ↑ 8.0 8.1 8.2 Technical Readout: 3050 Upgrade, p. 56
  9. ↑ Record Sheets: 3060 Unabridged, p. 137
  10. ↑ Record Sheets: 3060 Unabridged, p. 138
  11. ↑ Record Sheets: 3085 Unabridged — Old is the New New, p. 78
  12. ↑ Record Sheets: 3060 Unabridged, p. 139 - NAIS variant of the Enforcer III introduced during the Jihad.
  13. ↑ MUL Profile of the Enforcer III ENF-6NAIS - Includes; Introduction Year, BV2, and Alpha Strike Data Card.
  14. ↑ Technical Readout: 3150, p. 223
  15. ↑ Record Sheets: 3085 Unabridged — Old is the New New, p. 79
  16. ↑ MUL Profile for the Enforcer III ENF-7C3BS - Includes; Introduction Year, BV2, and Alpha Strike Data Card.
  17. ↑ 17.0 17.1 Experimental Technical Readout: Republic, Volume 1, p. 7
  18. ↑ 18.0 18.1 Experimental Technical Readout: Davion, p. 4
  19. ↑ BattleMech Manual, p. 91 Design Quirk Table - Enforcer III.

Bibliography[edit]

Retrieved from "https://www.sarna.net/wiki/index.php?title=Enforcer_III&oldid=1057654"