Difference between revisions of "Arctic Wolf II"

Line 1: Line 1:
{{Update Needed|[[Record Sheets: 3085 Unabridged - The Cutting Edge]]}}
 
 
{{InfoBoxBattleMech
 
{{InfoBoxBattleMech
 
|image=Arctic Wolf II.jpg
 
|image=Arctic Wolf II.jpg
Line 25: Line 24:
  
 
==Description==
 
==Description==
The '''''Arctic Wolf II''''' is a [[Clan Wolf-in-Exile]] Medium [[OmniMech]] that was developed during the [[Jihad]], and finally deployed in [[3085]].  The design is based on the OmniMech variant of the original [[Arctic Wolf]].  The original OmniMech version had a number of problems, including technical glitches and a lack of speed.  The Arctic Wolf II addresses speed concerns by using the original Arctic Wolf's Light Force 280 rated XL Fusion Engine. Seven Grandthrust Mk. 4 Jump Jets were also installed to increase tactical capacities that were gained from the failed OmniMech J Configuration.  The 'Mech has over 14 tons of pod space made available to its engineers to install weapons and equipment.  Perhaps one of the Arctic Wolf II's only weaknesses is its light armor protection, boasting only 6.5 ton of Ferro Fibrous armor.<ref>''Technical Readout: 3085 Supplemental'', p. 50 - Arctic Wolf II's background and spec info.</ref>
+
The '''''Arctic Wolf II''''' is a [[Clan Wolf-in-Exile]] Medium [[OmniMech]] that was developed during the [[Jihad]], and finally deployed in [[3085]].  The design is based on the OmniMech variant of the original ''[[Arctic Wolf]]''.  The original OmniMech version had a number of problems, including technical glitches and a lack of speed.  The ''Arctic Wolf II'' addresses speed concerns by using the original ''Arctic Wolf's'' Light Force 280 rated XL Fusion Engine. Seven Grandthrust Mk. 4 Jump Jets were also installed to increase tactical capacities that were gained from the failed OmniMech J Configuration.  The 'Mech has over 14 tons of pod space made available to its engineers to install weapons and equipment.  Perhaps one of the ''Arctic Wolf II's'' only weaknesses is its light armor protection, boasting only 6.5 ton of Ferro Fibrous armor.<ref>''Technical Readout: 3085 Supplemental'', p. 50 - ''Arctic Wolf II's'' background and spec info.</ref>
  
 
==Armament==
 
==Armament==
Line 31: Line 30:
  
 
==Alternate Configurations==
 
==Alternate Configurations==
* Alt. Config. A - Designed for long-range engagements, the A configuration boasts a pair of shoulder mounted LRM 15 launchers with three tons of ammunition.  The launchers are backed up by a pair of [[ER Medium Lasers]] mounted in each of the 'Mechs arms. Heat issues are mitigated by the addition of a single [[Double Heat Sink]]. BV(2.0)=2,111<ref>''Technical Readout: 3085 Supplemental'', p. 51 - Arctic Wolf II's A Configuration info.</ref>
+
* Alt. Config. A - Designed for long-range engagements, the A configuration boasts a pair of shoulder mounted LRM 15 launchers with three tons of ammunition.  The launchers are backed up by a pair of [[ER Medium Lasers]] mounted in each of the 'Mechs arms. Heat issues are mitigated by the addition of a single [[Double Heat Sink]]. BV(2.0)=2,111<ref>''Technical Readout: 3085 Supplemental'', p. 51 - ''Arctic Wolf II's'' A Configuration info.</ref>
  
* Alt. Config. B - Designed for flanking actions, the B configuration has four standard SRM 4 launchers mounted in its arms and side torso pods.  A single [[Large Pulse Laser]] and Small Pulse Laser make up the 'Mechs back up weaponry.  The 'Mech is also equipped with a single Double Heat Sink and three tons of ammunition for its short ranged missile launchers. BV(2.0)=1,678<ref>''Technical Readout: 3085 Supplemental'', p. 51 - Arctic Wolf II's B Configuration info.</ref>
+
* Alt. Config. B - Designed for flanking actions, the B configuration has four standard SRM 4 launchers mounted in its arms and side torso pods.  A single [[Large Pulse Laser]] and Small Pulse Laser make up the 'Mechs back up weaponry.  The 'Mech is also equipped with a single Double Heat Sink and three tons of ammunition for its short ranged missile launchers. BV(2.0)=1,678<ref>''Technical Readout: 3085 Supplemental'', p. 51 - ''Arctic Wolf II's'' B Configuration info.</ref>
  
* Alt. Config. C - The Wolves created the C configuration to suit the role of a fast harasser. It comes with a pair of arm mounted ER Large Lasers for ranged attacks. For short ranges, the "C" is equipped with a pair of torso mounted SRM 4 Launchers with two tons of ammunition. A single Double Heat sink is added to help with the Mech's increased heat loads. BV(2.0)=1,913<ref>''Technical Readout: 3085 Supplemental'', p. 51 - Arctic Wolf II's C Configuration info.</ref>
+
* Alt. Config. C - The Wolves created the C configuration to suit the role of a fast harasser. It comes with a pair of arm mounted ER Large Lasers for ranged attacks. For short ranges, the "C" is equipped with a pair of torso mounted SRM 4 Launchers with two tons of ammunition. A single Double Heat sink is added to help with the Mech's increased heat loads. BV(2.0)=1,913<ref>''Technical Readout: 3085 Supplemental'', p. 51 - ''Arctic Wolf II's'' C Configuration info.</ref>
  
 +
==Notes==
 +
''Record Sheets: 3085 Unabridged - The Cutting Edge'' reverses the ''Arctic Wolf II'' Prime and ''Arctic Wolf II'' A configurations.
  
 
==References==
 
==References==
Line 42: Line 43:
  
 
==Bibliography==
 
==Bibliography==
*[[Technical Readout: 3085 Supplemental]]
+
*''[[Technical Readout: 3085 Supplemental]]''
 +
*''[[Record Sheets: 3085 Unabridged - The Cutting Edge]]''
  
 
[[Category:BattleMechs|{{PAGENAME}}]]
 
[[Category:BattleMechs|{{PAGENAME}}]]

Revision as of 10:36, 24 March 2011

Arctic Wolf II
Arctic Wolf II
Production information
Manufacturer WC Site 1
Class Medium
Technical specifications
Mass 40 tons
Chassis AR1 Endo Steel
Armor Royal-7a Ferro-Fibrous
Engine Light Force 280 XL
Speed 110 km/h
Jump Jets Grandthrust Mk. 4
Armament

Primary Configuration

BV (2.0) 1,645[1]


Description

The Arctic Wolf II is a Clan Wolf-in-Exile Medium OmniMech that was developed during the Jihad, and finally deployed in 3085. The design is based on the OmniMech variant of the original Arctic Wolf. The original OmniMech version had a number of problems, including technical glitches and a lack of speed. The Arctic Wolf II addresses speed concerns by using the original Arctic Wolf's Light Force 280 rated XL Fusion Engine. Seven Grandthrust Mk. 4 Jump Jets were also installed to increase tactical capacities that were gained from the failed OmniMech J Configuration. The 'Mech has over 14 tons of pod space made available to its engineers to install weapons and equipment. Perhaps one of the Arctic Wolf II's only weaknesses is its light armor protection, boasting only 6.5 ton of Ferro Fibrous armor.[2]

Armament

The 'Mechs Primary Configuration is tailored to short-range engagements. It consist of four Streak SRM 4 launchers mounted in both arms and side torsos with two tons of ammunition to supply all four launchers. For backup weaponry, the 'Mech sports a pair of Small Pulse Lasers mounted in the right torso. This configuration also features an Active Probe and an ECM Suite.[3]

Alternate Configurations

  • Alt. Config. A - Designed for long-range engagements, the A configuration boasts a pair of shoulder mounted LRM 15 launchers with three tons of ammunition. The launchers are backed up by a pair of ER Medium Lasers mounted in each of the 'Mechs arms. Heat issues are mitigated by the addition of a single Double Heat Sink. BV(2.0)=2,111[4]
  • Alt. Config. B - Designed for flanking actions, the B configuration has four standard SRM 4 launchers mounted in its arms and side torso pods. A single Large Pulse Laser and Small Pulse Laser make up the 'Mechs back up weaponry. The 'Mech is also equipped with a single Double Heat Sink and three tons of ammunition for its short ranged missile launchers. BV(2.0)=1,678[5]
  • Alt. Config. C - The Wolves created the C configuration to suit the role of a fast harasser. It comes with a pair of arm mounted ER Large Lasers for ranged attacks. For short ranges, the "C" is equipped with a pair of torso mounted SRM 4 Launchers with two tons of ammunition. A single Double Heat sink is added to help with the Mech's increased heat loads. BV(2.0)=1,913[6]

Notes

Record Sheets: 3085 Unabridged - The Cutting Edge reverses the Arctic Wolf II Prime and Arctic Wolf II A configurations.

References

  1. Technical Readout: 3085 Supplemental, p. 50 - Arctic Wolf II's BV for Primary Configuration.
  2. Technical Readout: 3085 Supplemental, p. 50 - Arctic Wolf II's background and spec info.
  3. Technical Readout: 3085 Supplemental, p. 51 - Configuration info for Prime Config.
  4. Technical Readout: 3085 Supplemental, p. 51 - Arctic Wolf II's A Configuration info.
  5. Technical Readout: 3085 Supplemental, p. 51 - Arctic Wolf II's B Configuration info.
  6. Technical Readout: 3085 Supplemental, p. 51 - Arctic Wolf II's C Configuration info.

Bibliography