Difference between revisions of "Lineholder"
Sarna News
m (copyedits) |
m (add update needed template) |
||
| Line 1: | Line 1: | ||
| + | {{Update Needed|[[Record Sheets: 3058 Unabridged (Inner Sphere)]]}} | ||
{{InfoBoxBattleMech | {{InfoBoxBattleMech | ||
|image=Lineholder.jpg | |image=Lineholder.jpg | ||
Revision as of 16:27, 20 June 2010
 | This article needs to be updated with material from Record Sheets: 3058 Unabridged (Inner Sphere). Once these titles clear the Moratorium period, or if they already have, please consider revisiting this article and updating it with the new material. |
| |
| Lineholder | |
|---|---|
| Production information | |
| Manufacturer | Kressly Warworks |
| Model | KW1-LH2 |
| Class | Medium |
| Cost | 4,515,667 C-bills |
| Technical specifications | |
| Mass | 55 tons |
| Chassis | Kressly GRF1A-MDX |
| Armor | Kressly Stoneskin 30M |
| Engine | Core Tek 275 |
| Speed | 86.4 km/h |
| Armament |
|
| BV (1.0) | 987[1] |
| BV (2.0) | 1,280 |
Description
The Lineholder was the first BattleMech design to come from Kressly Warworks. The Lineholder is designed around a set of "Common Sense Rules" for 'Mech design. This approach has produced a 'Mech with a good ground speed that also has a respectable amount of armor and firepower. The 'Mech has a top speed of 86.4 km/h that allows it to keep up with all but the fastest light and medium 'Mechs. The Lineholder also carries ten tons of armor protection and has fourteen heat sinks. Its mix of off the shelf weapons and equipment make the Lineholder a reliable 'Mech that is easy to repair and is dependable in battle.
Armament
The primary weapons on the Lineholder are a pair of LongFire V LRM-5 launchers. These allow the Lineholder to keep an enemy at long range and enable the 'Mech to provide limited indirect fire support. The LRMs are backed up by a BlazeFire Systems Large Laser. Finally, the Lineholder carries four Intek Medium Lasers to protect itself in close combat.
Variants
- KW1-LH3 - An upgrade of the Lineholder to make it more viable on the modern battlefield, the LH3 variant replaces the Large Laser with an ER Large Laser and the four Medium Lasers with two Medium Pulse Lasers. BV (1.0) = 935[2], BV (2.0) = 1,214
- KW1-LH8 - A recent upgrade of the Lineholder, this variant of the 'Mech carries a pair of Rotary Autocannon/2s in place of the two LRM-5 launchers and the four Medium Lasers. The LH8 also carries an ER Large Laser in place of the Large Laser. Nicknamed the "Linebreaker," this variant was designed for the Federated Suns. Following the commencement of the Jihad, however, production ceased. BV (1.0) = 1,081, BV (2.0) = 1,330
- KW1-LHW - Produced exclusively for Word of Blake, the LHW uses the same Endo Steel chassis and Ferro-Fibrous armor that worked so well in the LH8. A direct upgrade of the LH2, the LHW mounts an ER large Laser, twin LRM-5s, and four ER Medium Lasers. The crown jewel, however, is the C3i Computer that allows the 'Mech to share target data with five other units. BV (1.0) = ??, BV (2.0) = ??