Difference between revisions of "Kintaro"

m (added category)
m (updated to bv 2.0 using newest hmp upgrade)
Line 15: Line 15:
 
*2x[[SRM-6]]s
 
*2x[[SRM-6]]s
 
*2x[[Medium Laser]]s
 
*2x[[Medium Laser]]s
|BV (1.0)=1,002
+
|BV (1.0)=857
 +
|BV (2.0)=1,160
 
}}
 
}}
  
Line 25: Line 26:
  
 
==Variants==
 
==Variants==
*KTO-18 - The KTO-18 ''Kintaro'' is the downgraded version of the [['Mech]] that was introduced in Technical Readout 3025. As far as the weapons on the [['Mech]], the Narc beacon has been removed and replaced with an additional SRM-6 giving it wonderful close range capabilities. In addition the ten tons of [[Ferro-Fibrous]] armor has been exchanged for eleven tons of standard armor causing the ''Kintaro'' to lose only a negligible amount of armor protection. BV (1.0) = 864
+
*KTO-18 - The KTO-18 ''Kintaro'' is the downgraded version of the [['Mech]] that was introduced in Technical Readout 3025. As far as the weapons on the [['Mech]], the Narc beacon has been removed and replaced with an additional SRM-6 giving it wonderful close range capabilities. In addition the ten tons of [[Ferro-Fibrous]] armor has been exchanged for eleven tons of standard armor causing the ''Kintaro'' to lose only a negligible amount of armor protection. BV (1.0) = 864, BV (2.0) = 1,187
*KTO-20 - The KTO-20 is the upgraded version of the KTO-18 used by the [[Draconis Combine]] in the [[War of 3039]]. The KTO-20 is nearly identical to its star league cousin. The only real difference is the loss of the Narc Missile beacon in exchange for a [[Large Laser]]. BV (1.0) = 1,081
+
*KTO-20 - The KTO-20 is the upgraded version of the KTO-18 used by the [[Draconis Combine]] in the [[War of 3039]]. The KTO-20 is nearly identical to its star league cousin. The only real difference is the loss of the Narc Missile beacon in exchange for a [[Large Laser]]. BV (1.0) = 1,081, BV (2.0) = 1,357
*KTO-21 - This version of the ''Kintaro'' is designed to utilize the new Improved Narc launcher (iNarc for short) and the new improved [[C3 computer]] system. In order to utilize these new systems the KTO-21 carries half a ton less armor then the KTO-19 ''Kintaro'' and also uses an [[Endo Steel]] chassis. In addition to the already mentioned upgrades, the [[Medium Laser]]s have been upgraded to [[ER Medium Laser]]s. BV (1.0) = 1,206
+
*KTO-21 - This version of the ''Kintaro'' is designed to utilize the new Improved Narc launcher (iNarc for short) and the new improved [[C3 computer]] system. In order to utilize these new systems the KTO-21 carries half a ton less armor then the KTO-19 ''Kintaro'' and also uses an [[Endo Steel]] chassis. In addition to the already mentioned upgrades, the [[Medium Laser]]s have been upgraded to [[ER Medium Laser]]s. BV (1.0) = 1,206, BV (2.0) = 1,295
*KTO-C - The KTO-C Kintaro is one of the test bed 'Mechs for the [[c3i computer]]. The 'Mech is armed with a Large Laser and a LRM-5 for long range punch. For close range work the 'Mech carries two SRM-6 launchers and a single Medium Laser. Additionally the c3i computer allows the ''Kintaro'' to share targeting telemetry with other units equipped with another c3i computer. BV (1.0) = 1,069
+
*KTO-C - The KTO-C Kintaro is one of the test bed 'Mechs for the [[c3i computer]]. The 'Mech is armed with a Large Laser and a LRM-5 for long range punch. For close range work the 'Mech carries two SRM-6 launchers and a single Medium Laser. Additionally the c3i computer allows the ''Kintaro'' to share targeting telemetry with other units equipped with another c3i computer. BV (1.0) = 1,069, BV (2.0) = 1,294
  
 
==References==
 
==References==

Revision as of 00:49, 20 July 2007

Kintaro
Kintaro
Production information
Manufacturer General Mechanics
Model KTO-19
Class Medium
Technical specifications
Mass 55 tons
Chassis Technicron-1
Armor Leopard V Ferro-Fibrous
Engine Core Tek 275
Speed 86.4 km/h
Armament
BV (1.0) 857
BV (2.0) 1,160


Description

The Kintaro was designed with one sole mission; to deliver a Narc Missile Beacon to enemy units. The Kintaro is a 'Mech that is intended to work in a team with a missile heavy lance and after it delivers it's deadly package to the enemy it is to disengage and let its lance mates do most of the work by tracking the signal from the Narc beacon. The act of putting this into practice is far less simple. With a maximum speed of 86.4kph the Kintaro is not able to engage and disengage from enemy units as easily as it's designers envisioned and because of this if a pilot is not observant of their surroundings and the enemy they can find themselves in a very dangerous situation.

Armament

The Kintaro is designed primarily around its Missile beacon and its weapons loadout reflects this. For long range sparring and to provide some form of striking capability as it closes the Kintaro carries a single Holly-5 LRM-5 Launcher. When the Kintaro moves into range to actually hit the enemy with the Narc beacon it has two HoverTec-6 SRM-6 launchers and two Magna Medium Lasers that come into play making it a competent and deadly close combat 'Mech.

Variants

  • KTO-18 - The KTO-18 Kintaro is the downgraded version of the 'Mech that was introduced in Technical Readout 3025. As far as the weapons on the 'Mech, the Narc beacon has been removed and replaced with an additional SRM-6 giving it wonderful close range capabilities. In addition the ten tons of Ferro-Fibrous armor has been exchanged for eleven tons of standard armor causing the Kintaro to lose only a negligible amount of armor protection. BV (1.0) = 864, BV (2.0) = 1,187
  • KTO-20 - The KTO-20 is the upgraded version of the KTO-18 used by the Draconis Combine in the War of 3039. The KTO-20 is nearly identical to its star league cousin. The only real difference is the loss of the Narc Missile beacon in exchange for a Large Laser. BV (1.0) = 1,081, BV (2.0) = 1,357
  • KTO-21 - This version of the Kintaro is designed to utilize the new Improved Narc launcher (iNarc for short) and the new improved C3 computer system. In order to utilize these new systems the KTO-21 carries half a ton less armor then the KTO-19 Kintaro and also uses an Endo Steel chassis. In addition to the already mentioned upgrades, the Medium Lasers have been upgraded to ER Medium Lasers. BV (1.0) = 1,206, BV (2.0) = 1,295
  • KTO-C - The KTO-C Kintaro is one of the test bed 'Mechs for the c3i computer. The 'Mech is armed with a Large Laser and a LRM-5 for long range punch. For close range work the 'Mech carries two SRM-6 launchers and a single Medium Laser. Additionally the c3i computer allows the Kintaro to share targeting telemetry with other units equipped with another c3i computer. BV (1.0) = 1,069, BV (2.0) = 1,294

References