Difference between revisions of "Satyr"

m (→‎Variants: new layout)
Line 18: Line 18:
 
The '''''Satyr''''' [[ProtoMech]] was designed to serve as a deep raider and reconnaissance unit. To this end, it was equipped with fairly high speed and a [[Light Active Probe]]. Offering only slightly more protection than a ''[[Harpy]]'' or ''[[Siren]]'', the ''Satyr's'' best defense is to remain hidden from enemy units.
 
The '''''Satyr''''' [[ProtoMech]] was designed to serve as a deep raider and reconnaissance unit. To this end, it was equipped with fairly high speed and a [[Light Active Probe]]. Offering only slightly more protection than a ''[[Harpy]]'' or ''[[Siren]]'', the ''Satyr's'' best defense is to remain hidden from enemy units.
  
==Armament==
+
==Weapons and Equipment==
 
The ''Satyr's'' single [[ER Small Laser]] allows it to inflict moderate damage on any enemy unit that gets too close, while freeing it from logistical bases.
 
The ''Satyr's'' single [[ER Small Laser]] allows it to inflict moderate damage on any enemy unit that gets too close, while freeing it from logistical bases.
  

Revision as of 04:12, 20 December 2013

Satyr.jpg
Satyr
Production information
Manufacturer Clan Smoke Jaguar Unknown facility[1]
Tech Base Clan
Introduced 3060
Technical specifications
Mass 4 tons
Chassis Standard
Armor Standard
Engine 45 Fusion
Speed 119 km/h
Jump Jets None
Armament

1x ER Small Laser
1x Light Active Probe

BV (1.0) 98[2]
BV (2.0) 133[3]

Description

The Satyr ProtoMech was designed to serve as a deep raider and reconnaissance unit. To this end, it was equipped with fairly high speed and a Light Active Probe. Offering only slightly more protection than a Harpy or Siren, the Satyr's best defense is to remain hidden from enemy units.

Weapons and Equipment

The Satyr's single ER Small Laser allows it to inflict moderate damage on any enemy unit that gets too close, while freeing it from logistical bases.

Variants

  • Satyr 2 
    First variant of the ProtoMech, this was first introduced during the 3060s. The design drops all of the original's weaponry for a increase mobility with Jump Jets and increase armor. These changes resulted in the Satyr 2 having a single torso mounted Micro Pulse Laser. BV (1.0) = 76 [4], BV (2.0) = 125[5]
  • Satyr 3 
    Another various of the original created at same time as Satyr 2, the third retains the original's armor protection. With slight increase of Jump Jet mobility, Satyr 3 is given a single Streak SRM 2 launcher mounted in its torso. The weapon has been given a ton of ammunition for this launcher. BV (2.0) = 160[6]
  • Satyr 4 
    Developed during the Jihad, this design puts the ProtoMech variant in role spotter with a Clan Light TAG. It is only armed with a torso mounted AP Gauss Rifle with ton of ammunition. The Satyr 4 has only slight increase in armor protection comparison to the original. BV (2.0) = 109[7]
  • Satyr-XP 
    Produced by Irece Delta Refit Center, and developed by Clan Nova Cat to support battle armor formations, the Satyr-XP has a lower maximum speed (97 km/h) and adds a 180 meter jump capability. To make room for the jump jets, the weapons were replaced by a single SRM-2 with ten reloads. The armor protection remains the same, but the different manufacturer resulted in a very different look from the original Satyr. BV (2.0) = 114[8]

Design Quirks

The Satyr-XP variant is subject of the following Design Quirk:[8]

References

  1. Technical Readout: 3060, p. 198
  2. Technical Readout: 3060, p. 198
  3. Record Sheets: 3060 Unabridged p. BV2 from Record Sheet of Satyr from RS3060u.
  4. Records Sheets: Upgrades p. 28
  5. Record Sheets: 3060 Unabridged p. 295 - Civil War era variant of the Satyr.
  6. Record Sheets: 3060 Unabridged p. 296 - Second Civil War era Satyr, with JumpJets and SRM Launcher.
  7. Record Sheets: 3060 Unabridged p. 297 - Jihad era spotter variant of the Satyr.
  8. 8.0 8.1 Technical Readout: Prototypes, p. 85

Bibliography