Locust

Locust
Production information
Manufacturer	Achernar BattleMechs Alliance Defenders Limited Bergan Industries Bordello Military Goods, Inc. Corean Enterprises Defiance Industries Diplass BattleMechs Gibson Federated BattleMechs Interstellar Armaments Majesty Metals and Manufacturing Pinard Protectorates Limited Protectorate Military Industries Rim Motors Taurus Territorial Industries
Production Year	2499
Model	LCT-1V
Class	Light
Cost	1,512,400 C-bills
Technical specifications
'Mech type	Inner Sphere BattleMech
Mass	20 tons
Chassis	Bergan VII
Armor	StarSlab/1
Engine	LTV 160
Communications System	Garret T-10B
Targeting Tracking System	O/P 911
Heat Sinks	10 single
Speed	129 km/h
Armament	1x medium laser 2x machine gun
BV (1.0)	356
BV (2.0)	432

Description

The Locust was one of the most common BattleMechs in existence, having been in continuous production since the design was first introduced by Bergan Industries in 2499. One of the smallest 'Mechs ever built, the Locust was designed exclusively for reconnaissance and quick strike missions, using its then-phenomenal speed to outrun most enemies. In a situation where it was unable to outrun its enemies, the 'Mech did have a light array of weapons with which to defend itself, but the Locust lacked the firepower or staying power to be a true front-line combatant and as a result few MechWarriors enjoyed piloting Locusts. Within its weight-class though, the Locust was considered an excellent 'Mech, overshadowed as a scout only by designs which mounted jump jets. Often when a Locust engaged in combat it was as a holding action until reinforcements could arrive, although when operating in groups of three they could swarm lone enemy 'Mechs that were separated from friendly support.

Bergan Industries built Locusts from eight different factories and supplied the Star League and its member states right through to the Amaris Civil War. During the Succession Wars the number of manufacturers increased and the design was being built in nearly a dozen factories, including ones in the Periphery. The wide variety of manufacturers meant production costs for the 'Mech were low and parts were widely available, leading to everyone from lowly pirates to corporate defense forces buying Locusts in large numbers. It also led to many different variants of the Locust, including a failed Davion version mounting a PPC, although those in the Periphery were largely limited to building the original LCT-1V model.

As the Succession Wars wound down those manufacturers within the Successor States began to experiment with new and rediscovered technology to build updated versions of the Locust. The Capellan Confederation in particular modified the Ares facility to build the LCT-1L variant of the Locust with a version of the Triple Strength Myomer that wouldn't catch on fire. Other updated variants, including the LCT-3D, LCT-3M, and LCT-3S were introduced just in time to take part in the Clan Invasion. After the war the Word of Blake approached Corean Enterprises about creating a new Locust variant for their militia, agreeing to buy the entire first production run to assuage the company's misgivings. The various Periphery powers, still largely reliant on the Locust, also began fielding updated variants of their own, although none of the Great Houses were much interested in revitalizing the line. Even into the thirty-second century though the Locust continues to be produced and used out in the Periphery.

Manufacturers

The following manufacturers produced the Locust at some time. Models and planets are noted where known. Vicore Industries was licensing its Locust variants to other companies by 3067.

• Bergan Industries has produced the Locust throughout its history, even licensing it to the four Periphery powers before the Amaris Coup.
  • Ares: The 1V was in production from its introduction through at least 3054, by then being produced in limited numbers for triple-strength myomer testing using its 1L refit; production . The 1E was introduced in 2811, commissioned by the Capellan government to reduce dependence on ammunition. Production of the 1Vb was revived during the Jihad. The variant produced in 3080 was not specified. Bergan introduced its 7V during the ilClan era; the 7V2 is presumably a refit or production variant of the Bergan product.
  • New Earth: The 1Vb Royal SLDF model was produced from its introduction in 2610, ceasing during the collapse of the Star League.
• Achernar BattleMechs' main facility was on New Avalon. The West Fabrication Facility on Achernar was a longtime producer of IndustrialMechs before its capture by the Word of Blake, who converted the plant to produce the Osprey; the plant was destroyed in June 3077.
  • The WFF facility produced the 5W variant before its destruction.
  • New Avalon facility was producing the 3D in 3050 and 3054. They purchased the 5M license from Corean, with production starting in 3067.
• Alliance Defenders Limited: Produced the 1V in 3025, 3050, and 3054. The 3080 production model is not known.
• Bordello Military Goods, Inc. was producing an unspecified variant on Antwerp in 3080.
• Clan Ghost Bear salvaged the Locust line on Alshain after its conquest, producing the 1V by 3054.
• Corean Enterprises: Corean produced the 3M in its MacAdams-Suharno on Stewart plant in 3050 and 3054. The 5M was part of the Project Phoenix revival, with the Word of Blake receiving the entire first production run during the early Jihad. The model produced in 3080 is unknown, though the 5W2 was in production by 3085.
• Defiance Industries: Defiance produced the 3S on Furillo in 3050 and 3054. The 5S was a Jihad-era design. The version produced in 3080 is not specified. Near the start of the ilClan era, they introduced the 7S.
• Diplass BattleMechs produced the 1V on Timbuktu until the SLDF invasion of the Rim Worlds Republic.
• Gibson Federated BattleMechs: FWDI produced the 3M at its Gibson facility in 3050 and 3054.
• Interstellar Armaments on Rockwellawan was producing the 1V in 3145.
• Majesty Metals and Manufacturing: MMM produced the ubiquitous 1V in 3025, 3050, and 3054. MMM was producing one or more variants on Canopus IV and Dunianshire in 3080.
• Pinard Protectorates Limited on MacLeod's Land still produced the 1V in 3050 and 3054. In 3080, PPL was producing an unspecified variant.
• Protectorate Military Industries on Erod's Escape was producing an unspecified variant in 3145.
• Rim Motors on Otisberg was producing an unspecified variant in 3145.
• Taurus Territorial Industries on Taurus was producing the 1V in 3050 and 3054. In 3080, TTI produced an unspecified variant.
• The site or even producer is not always known or specified in available documents.
  • The Marian Hegemony was fielding the 1V2 by 3067, though its source was unknown.
  • The Magistracy of Canopus and Taurian Concordat were producing the 5V by 3067.
  • The "Periphery-born" 5T was in use by the Capellans by 3085. The use of a machine gun array implies a Taurian origin.
  • The 6M was produced by the Free Worlds League in 3085, presumably by Gibson.

Weapons and Equipment

The main weapon of the LCT-1V Locust was a single Martell medium laser mounted in the center torso. Backing this up were two Sperry Browning machine guns, which effectively deterred infantry attacks against the Locust's vulnerable legs. These were located in either arm and fed by a one-ton ammo bin located in the center torso. Lacking hand actuators the Locust was vulnerable to other 'Mechs when engaging in close combat.

The primary asset of the Locust was its speed, using a 160-rated fusion engine to attain a cruising speed of 86.4 km/h and top speed of 129.6 km/h. This speed is necessary for the 'Mech's survival, since four tons of armor means the Locust can be quickly crippled or destroyed by direct hits. The standard engine-mounted 10 heat sinks are sufficient in most cases, although those variants which mount more energy weapons can suffer.

Variants

• LCT-1E 

  Developed by Bergan in response to Capellan requests for a Locust with greater punch and lower munition consumption as the First Succession War shifted to lower level raiding, the LCT-1E Locust was introduced in 2811. Among the least-produced variants, the "Energy" Locust carried an entirely laser-based weapons assortment, with two Martell medium lasers and two Magna small lasers mounted in the arms. This choice allowed Capellan MechWarriors to overcome the 'Mech's limited firing arc by flipping its weaponry between forward and rearward arcs at will. BV (1.0) = 484; BV (2.0) = 553

• LCT-1L 

  The LCT-1L Locust was an attempt to allow the 'Mech to operate at even higher speeds by adding Triple Strength Myomer to the design. Introduced in 3030, the weapons are identical to those on the LCT-1V, as it was a testbed for the technology by Bergan Industries' Ares plant. BV (1.0) = 364; BV (2.0) = 474

• LCT-1M 

  The LCT-1M was a long-range version of the Locust built for the Federated Suns in 2571. This variant carried two LRM-5 launchers in place of the machine guns and one ton of reloads, at the cost of three tons of armor protection. BV (1.0) = 382; BV (2.0) = 424

• LCT-1S 

  The LCT-1S Locust built for the Lyran Commonwealth in 2567 also replaced the machine guns, this time with two SRM-2 racks with one ton of reloads for a heavier close range punch. This came at the cost of one ton of armor protection. BV (1.0) = 376; BV (2.0) = 440

• LCT-1V (C) 

  A Clan-tech retrofit of the classic Locust and intended for second-line and solahma troops, the Locust C replaced each of the arm-mounted machine guns with a Clan ER small laser, which frees up the weight to replace the center medium laser with a Clan-grade medium pulse laser, but leaves the structural components of the LCT-1V unaltered. BV (2.0) = 672

• LCT-1Vb 

  The Royal Locust introduced in 2610 mounts a small pulse laser and a medium pulse laser in each arm, while keeping the torso-mounted medium laser. It also uses an XL engine, endo steel chassis, and ferro-fibrous armor, and the single heat sinks have also been upgraded to double heat sinks. BV (2.0) = 642

• LCT-1V2 

  The 1V2 Locust was a Periphery upgrade of the design introduced in 3066 for the Marian Hegemony. While still carrying the center-mounted medium laser, it mounted four RL-10s in place of the machine guns. BV (1.0) = 500; BV (2.0) = 568

• LCT-3D 

  The 3D Locust, introduced in 3049, used Star League technology to take the concept of the 1M further. Although it carried only two Magna Longbow-5 LRM-5 launchers, the engineers at Achernar BattleMechs on New Avalon upgraded the armor to ferro-fibrous and the structure to endo steel. Completely lacking in close-range, weaponry this variant was suitable for harassing the enemy at long range then fleeing before they could get too close. BV (1.0) = 377; BV (2.0) = 436

• LCT-3M 

  The 3M Locust was built for the Free Worlds League in 3050, with production carried out at both Corean Enterprises on Stewart and Free Worlds Defense Industries on Gibson. It retained the Martell medium laser, but replaced the machine guns with four Magna small lasers and added a Voelkers Parasol anti-missile system in the left arm for missile defense. The armor was upgraded to Kallon FWL Special ferro-fibrous with CASE in the left torso to protect the one ton of AMS ammo, and utilized a Corean-II Delux Endo Steel chassis. The electronics were also updated to a Garrett T10 B communications system and a Corean CalcMaster targeting-tracking system. BV (1.0) = 464; BV (2.0) = 522

• LCT-3S 

  The 3S Locust, constructed on Furillo by Defiance Industries in 3049, carried the 1S upgrade further. This time, as with the 3M, the structure used endo steel and the armor was used ferro-fibrous, but the SRM-2s were upgraded to Coventry T4H Streak SRM-2s while the medium laser was kept. BV (1.0) = 431; BV (2.0) = 483

• LCT-3V 

  This Locust variant, introduced in 3004, was similar to the 1V except that it carried a set of two medium lasers in the center torso, while retaining the arm-mounted machine guns. The additional armament comes at the cost of half a ton of machine gun ammunition and half a ton of armor protection. BV (1.0) = 434; BV (2.0) = 490

• LCT-5M 

  The 5M was a straightforward enhancement of the 3M model, keeping the construction and electronics improvements while upgrading all of the lasers to extended-range models, giving it one Magna Mk VI ER medium laser and four Magna Mk IV ER small lasers. In addition, the use of a Hermes 240 XL engine allowed engineers to upgrade the 'Mech's top speed to 194 km/h. Designed by the Word of Blake, each of their Level III units had at least one 5M Locust after its introduction in 3066. BV (1.0) = 516; BV (2.0) = 719 or 516

• LCT-5M2 

  This Dark Age version of the Locust has a top speed nearing 170 km/h. It carries an ER medium laser in the center torso and a medium pulse laser in each arm. It's protected by ferro-fibrous armor. BV (2.0) = 693

• LCT-5M3 

  This Locust variant was also introduced during the Dark Age. It uses a smaller engine, which reduces the top speed to 140 km/h, but adds a half ton of armor and carries an ER medium laser in each arm and an ER large laser in the center torso. BV (2.0) = 929

• LCT-5S 

  Developed from the LCT-3S, this configuration carries an MML-3 in each arm. The higher heat load requires 10 double heat sinks instead of the singles used by the 3S. The medium laser, endo steel chassis, and armor of the 3S remain the same. The biggest drawback to this design is apparently its lack of missile ammunition; it only carries a single ton of ammo in a CASE-protected bay. BV (2.0) = 509

• LCT-5T 

  This upgrade made the Locust into a devastating anti-infantry 'Mech. Built in 3070, it used an XL engine and ferro-fibrous armor to make enough space for three light machine guns in each arm, each trio linked to a Machine Gun Array. A half-ton of CASE-protected ammunition was sufficient for sustained firing, while single heat sinks could handle even the load of the ER medium laser that was of use against hardened targets. BV (2.0) = 520

• LCT-5V 

  The 5V Locust is similar to the 3V Locust, carrying a pair of ER medium lasers, two RL-10s, and was protected by ferro-fibrous armor; the original LTV 160 engine was used. Built in 3068, its relatively low-tech design made it attractive to Periphery powers, namely the Magistracy of Canopus and Taurian Concordat. BV (1.0) = 537; BV (2.0) = 665

• LCT-5W 

  Developed by the Word of Blake in 3076 this Locust uses MASC to top out at speeds of over 180 km/h. It's equipped with a pair of ER medium lasers, TAG, and an improved C3 computer. Light ferro-fibrous armor protects the endo steel structure. BV (2.0) = 695

• LCT-5W2 

  Developed from a Word of Blake design in 3079, this Locust has a top speed of over 150 km/h, and used MASC to provide bursts of speed topping out at over 180 km/h. A pair of ER medium lasers provides firepower while a C3 slave, Guardian ECM suite, and TAG system provide electronic support. The chassis uses endo steel, an XL engine provides power, light ferro-fibrous armor provides protection, and double heat sinks keep the heat from the weapons under control. BV (2.0) = 787

• LCT-6M 

  Built in 3071, the 6M variant used a massive Hermes 280 XL engine to propel it to an astounding speed of 226.8 km/h, and was capable of bursts of speed reaching 302.4 km/h through a MASC system. The 6M used a small cockpit to save weight with the side effect of making the 'Mech harder to pilot and utilized ferro-fibrous armor to get the most of the light armor the 'Mech carried. It was armed with two Magna Mk VI ER medium lasers, which were backed up by a single Magna Mk IV ER small laser. The 6M was produced by Corean Enterprises on Stewart. BV (2.0) = 956

• LCT-7S 

  Defiance Industries uses this model as a testbed for their Clan-spec XL engine and ER medium laser. The Furillo plant produces this model, which has a top speed of 180 km/h. An endo steel chassis is protected by four tons of ferro-fibrous armor, and 10 double heat sinks keep things cool. Like the original Locust this model carries a machine gun in each arm fed from a CASE protected half ton ammunition bay. Despite these features pilots should remember that the Locust is still a scout 'Mech. BV (2.0) = 706

• LCT-7V 

  Built by Bergan Industries on Ares, this updated Locust uses a 200-rated light engine to improve survivability and reach a top speed of 150 km/h, protected by three and a half tons of heavy ferro-fibrous armor. The main firepower comes from a medium X-Pulse laser in the center torso, and each arm carries a MagShot Gauss rifle; the Gauss rifles are fed from a one ton ammo bin in the center torso. Endo steel is used to provide weight savings needed for this equipment. BV (2.0) = 585

• LCT-7V2 

  Based on the LCT-7V, this model replaces the weapons completely. Each arm mount has an ER small laser while the center torso carries a light PPC, which turns the Locust into a light sniper that can reposition itself quickly. BV (2.0) = 634

Apocryphal Variants

Apocryphal Content Starts

The information after this notice comes from apocryphal sources; the canonicity of such information is uncertain.
Please view the reference page for information regarding their canonicity.

These variants were introduced in various apocryphal sources, and thus far have not appeared in any canonical media.

From BattleTech: The Crescent Hawks' Inception:

• "First Modification" 

  As of 3028, the techs on Chara III used this designation for a field modification of the LCT-1V that exchanges the machine guns and their ammunition for a pair of medium lasers, one mounted in each arm.

• "Second Modification" 

  As of 3028, the techs on Chara III used this designation for a field modification of the LCT-1V First Modification that swaps the fusion engine out for a smaller, 140-rated one, and adds one small laser to each torso side.

From MechWarrior Online:

• LCT-PB Pirates' Bane 

  Themed as a variant piloted by Lori Kalmar, despite the fact it utilizes technology that was not commonly available when she piloted a Locust, the MWO Hero 'Mech is built around an 190-rated XL engine on an endo steel frame, freeing up weight for twin small lasers in each side torso supported by a pair of center-torso mounted machine guns. Additionally fitted with a Guardian ECM suite, two tons of machine gun ammunition and 10 double heat sinks support it in combat.[1]

Apocryphal Content Ends

Design Quirks

The Locust has the following Design Quirks:

• Compact ’Mech
• Narrow/Low Profile
• Cramped Cockpit
• No/Minimal Arms
• Weak Legs

Related BattleMechs

• Locust IIC - One of the 'Mechs carried on the Exodus with General Aleksandr Kerensky and the remnants of the SLDF, the Clans created their own upgraded IIC variant of the Locust using Clan technology. BV (1.0) = 975; BV (2.0) = 1,103

• Koto - One of the most common 'Mech designs on Solaris VII, as with the Inner Sphere as a whole, the humble Locust was also a frequent basis for a number of refurbished custom designed 'Mechs, such as Omnitech Industries' Koto.

Notable Pilots

See Category:Notable Locust Pilots

Notes

• The (original) Locust artwork from TRO:3025 is one of the Unseen 'Mech designs. The Locust was Reseen in 3067 using revised artwork.

• Author Blaine Lee Pardoe stated in a blog entry that, according to his memory which he admitted could be wrong, the Locust was among the BattleMechs for which he wrote the original background as initially published in TRO:3025, after being given only its name, image, and game stats to work with for the TRO entry.

• In German products, the unit's proper name was translated to Heuschreck. The model code was accordingly changed to HSC-1K.

• In French products, the unit's proper name was translated as Sauterelle, which can mean both Locust and Grasshopper.

Gallery

• 

  Original Unseen LCT-1V Locust from TRO:3025

• 

  LCT-1V Locust from First Succession War

• 

  LCT-3M Locust from TRO:3050

• 

  LCT-1V2 Locust from TRO:Phoenix

• 

  LCT-5M Locust from TRO:Phoenix

• 

  LCT-5V Locust from TRO:Phoenix

• 

  LCT-5W2 Locust from TRO:3085

• 

  Locust in colors of Eridani Light Horse from Camo Specs

• 

  A pair of Locusts on a recon mission from BattleTech: 25 Years of Art & Fiction

• 

  A Locust in an urban battlefield from Historical: Reunification War

• 

  A Locust in 8th Rasalhague Regulars colors.

• 

  A Locust from MWDA dossiers

• 

  Model of Locust from MWO

• 

  Locust standee from BattleTech, Second Edition

• 

  Locust miniature from PlasTech

• 

  Locust miniature from ...Mechs! (also used in BattleTech, Third Edition)

• 

  Locust miniature from BattleTech: A Game of Armored Combat

Bibliography

• Battle of Tukayyid Supplemental
• BattleMech Manual
• Combat Operations
• Field Manual: 3145
• First Succession War
• Master Unit List
• MechWarrior: Dark Age Bannson's Raiders' dossier of Mavis Morgan
• MechWarrior: Dark Age Dragon's Fury - Janina Lukica Dossier
• MechWarrior: Dark Age Dragon's Fury - Shin Yoshida's Dossier
• MechWarrior: Dark Age House Liao's dossier of Irena Borjon
• Objectives: Periphery
• Recognition Guide: ilClan, vol. 16
• Record Sheets: 3025 & 3026
• Record Sheets: 3039 Unabridged
• Record Sheets: 3050
• Record Sheets: 3067
• Record Sheets: 3085 Unabridged — Project Phoenix
• Record Sheets: 3145 New Tech, New Upgrades
• Record Sheets: Phoenix Upgrades
• Record Sheets: Phoenix Upgrade (Complete)
• Record Sheets Volume One: Light 'Mechs
• Technical Readout: 3025
• Technical Readout: 3039
• Technical Readout: 3050
• Technical Readout: 3055
• Technical Readout: 3085
• Technical Readout: Project Phoenix